Best Concrete Machinery

10mm x 10mm Length 1M Black Plastic Open Type Cable Wire Carrier Drag Chain Towline R18 for 3D Printer and CNC Machines

  • The Cable Drag Chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement.
  • You can link the cables with each other to form one long length you need.
  • Surface gloss,Low temperature resistance, wear resistance and corrosion resistance.
  • Suitable for reciprocating motion in occasions, with built-in cables, pipes, water pipes, etc.
  • The Drag chain has been widely used in CNC machine tools,electronic equipments, fire machinery, stone machinery, glass machinery, doors and windows machinery, counting devices, electrical machines, etc.
Check Stock

uxcell R28 15mm x 15mm Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC 1 Hole

  • External Size: 20x23mm(0.787x0.906 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

RCH Hardware CH-S56-11S-BLK-10 |9 Gauge Decorative Solid Steel Standard Link Fixture Chain | 10 Foot Increments | Black Finish

  • EASY TO INSTALL - The Cable Drag Chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement..
  • FEATURES - High wear resistance, high temperature resistance, salt resistance, acid resistance and alkali resistance.Due to the small spacing, the operation is particularly quiet and the noise is low..
  • APPLICATION - Widely used in 3D printers, CNC machine tools, electronic equipment, fire fighting machinery, stone machinery, glass machinery, door and window machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses, etc..
  • FAST MOVING SPEED - Very suitable for short distance light bearing condition.
Check Stock

Brass Oil Distributor 5\\/6 Way Adjustable Lube Oil Piston Distributor Value Manifold Block for Centralized Lubrication System(1 in 5 out)

  • ☛【Oil Volume Outlet Can Be Adjusted】The oil volume of each oil outlet can be adjusted to meet the needs of various working scenarios.
  • ☛【Easy To Adjust And Distribute 】The oil separator has a simple and compact structure, and is easy to adjust and distribute evenly.
  • ☛【Wear Resistance And Durable】Using high‑quality brass material, the oil distributor possesses good wear resistance and is durable.
  • ☛【Good Product Performance】Good production technology and air tightness ensure good product performance.
  • ☛【Applicable Widely】 The product is applicable to CNC machining center machinery, production lines and machine tools, forging machinery, die-casting machinery, woodworking machinery and other mechanical equipment lubrication systems.
Check Stock

uxcell R28 15mm x 40mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • Internal Size: 15x40mm(0.59x1.574 inch)(InnerH*InnerW).
  • External Size: 20x49mm(0.787x1.929 inch)(OuterH*OuterW).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

uxcell R28 15mm x 20mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • Internal Size: 15x20mm /0.59"x0.787" (InnerH*InnerW).
  • External Size: 20x28mm/0.787"x1.1"(OuterH*OuterW)Bending radius: R28.
  • Change Size: You could link the cables with each other to form one long length you need..
  • Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

Tie Down Engineering Dock Hardware - Angle Brackets/Clip

  • The bracket holder is injection molded hard plastic with countersunk screw hole for firm installation.
  • Unique three-connect stent fixed design, can fix three electric machinery once, placed beautiful.
  • Easy to fix electric machinery / tools and on the table and wall, clean and tidy.
  • Suitable for the fixing of for 14.4V/18V/60V electric machinery at the same time, perfectly match.
  • Adopt good‑quality ABS material, possess impact resistance, scratch resistance, environmental protection.
Check Stock

Safe Thaw Industrial Strength Concrete-Safe Pet Paw-Safe Snow & Ice Melter,100% Salt-Chloride-Free and Traction Agent Use on Asphalt Roofs & On Any Surface 10 Pound Jug

  • PET-SAFE ICE MELT: Safe Thaw ice melt from the makers of Safe Paw is safe to use around plants, dogs, pets, and children.
  • Ice melt won't damage concrete and is environmentally safe for land and waterways. Safe If Ingested.
  • MELT ICE IN 10 MINUTES: Ice melting crystals prevent water molecules from reforming to destabilize and melt ice particles in 10 minutes.
  • MELTS IN ULTRA COLD CONDITIONS: Safe Thaw crystal leaches out a de-icing liquid to speed up the melting process even in sub-zero temperatures.
  • NON-CORROSIVE & LONG SHELF LIFE - It’s non corrosive and non-conductive. No damage to delicate machinery or worry about short circuits. Get instant melting without worrying about property damage. Concentrated formula assures long-term, maximum effectiveness from season to season.
  • EXCELLENT SPREAD RATE - Covers 100 square feet per pound.
Check Stock

Plastic Drag Chain Cable Carrier Closed Type with End Connectors R38 18 x 18mm L1000mm for Electrical CNC Router Machines

  • External Size: 23x28mm(OuterH*OuterW);Bending radius: R38.
  • Change Size: You could link the cables with each other to form one long length you need..
  • Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

Sunhokey 15x40mm 1-Meter Black Plastic Flexible Drag Chain Cable Wire Carrier Nested Semi Colsed Twist Chains for 3D Printer and CNC Machines (Inside Open) (15x40mm)

  • Easy to install and repair, free movement, low noise, wear-resistant, high-speed movement..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • Surface gloss,Low temperature resistance, wear resistance and corrosion resistance..
  • Drag chains can be linked with each other to form one longer length you need..
  • Widely used for 3D Printers, CNC machine tools,electronic equipments, fire machinery, stone machinery, glass machinery, doors and windows machinery, counting devices, electrical machines, etc..
Check Stock