Best Conduit Adapters And Fittings

SharkBite 1/2 Inch Disconnect Tongs for Push to Connect Brass Plumbing Fittings, U711

  • SHARKBITE REMOVAL TOOL: 1/2 inch disconnect tongs allow for brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings in tight spaces for easy disassembly.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect tong is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made with durable stainless steel and wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

Reliance Control Corporation WKPBN30 Portable Generator Through-The-Wall PWR Transfer Kit, EMW3790037

  • Power transfer kit, create a back up power panel inside your home, connected to your portable generator outside your home, to keep you safe from storm weather & toxic generator exhaust.
  • Includes 6 circuit power panel, 30a outdoor power cord inlet box, NM PVC Conduit.
  • Fittings & PVC cement, 12 inch x 1 inch flat head drill & all mounting accessories.
Check Stock

Dorman C95503 Front Parking Brake Cable Compatible with Select Cadillac / Chevrolet / GMC Models

  • Trustworthy replacement - engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles.
  • Quality design - inner cables are sheathed and lubricated to provide improved durability.
  • Long-lasting construction - flexible casings are completely covered with conduit to prevent wear and tear of interior cables.
  • Tough materials - zinc-plated fittings prevent corrosion.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman C660531 Rear Passenger Side Parking Brake Cable Compatible with Select Toyota Models

  • Trustworthy replacement - engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles.
  • Quality design - inner cables are sheathed and lubricated to provide improved durability.
  • Long-lasting construction - flexible casings are completely covered with conduit to prevent wear and tear of interior cables.
  • Tough materials - zinc-plated fittings prevent corrosion.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman C660871 Rear Driver Side Parking Brake Cable Compatible with Select Ford Models

  • Trustworthy replacement - engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles.
  • Quality design - inner cables are sheathed and lubricated to provide improved durability.
  • Long-lasting construction - flexible casings are completely covered with conduit to prevent wear and tear of interior cables.
  • Tough materials - zinc-plated fittings prevent corrosion.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions

  • Fitted with quick coupling system and pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
  • Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
  • FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
  • Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
  • Recommended for older low-pressure systems with mechanical fuel pumps.
  • Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
  • EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
  • PACKAGE CONTENTS: Fuel tester kit gas pressure test gauge package is a comprehensive kit of adapters and fittings.
  • Comes with flex hoses, fittings, and instructions for quick reference.
  • Includes Brass 1/8"-27 NPTx1/4"-18NPT, Brass 1/4" Barbed x 1/4"-18NPT, Aluminum 1/4" & 3/8 Barbed x 1/8-24NPT, 3 Rubber Hoses 1/4" x 2.5" L, 3/8" x 3.0" L.
Check Stock

SharkBite U256LFCP 3/4 Inch 90 Degree Elbow Push to Connect Pipe Fitting, 10 count, Brass

  • INSTALLS IN SECONDS: Repair with no special tools, soldering, crimping, or glue.
  • Just push to create a quick watertight union with SharkBite pushfit connectors.
  • VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination.
  • LEAD-FREE: Made of high-quality forged DZR brass that is lead-free. Ball valves, shutoffs, and compression fittings, are safe for potable water lines.
  • PREFERRED BY THE PROS: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
  • MADE IN THE USA: All SharkBite valves, joints, and adapters are manufactured and tested in the USA.
Check Stock

TEMCo Industrial Universal Automotive Tube Flaring Tool Set Includes Push Connect Double Flare Fuel and Trans Cooler Dies TH1911

  • Dies and adapters to fabricate push connect fittings for 1/4, 5/16 and 3/8".
  • flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
  • Dies and adapters to fabricate GM fuel line flare, brake lines and transmission 5/16 and 3/8".
  • GM transmission cooling line 3/8" and 1/2".
  • Dies and adapters to fabricate metric bubble flare 4.75, 6, 8, and 10mm.
  • Dies have an enlarged compression area to grip the dies better.
  • Flaring tool set includes a Stabilizing Arm for easy tube forming.
Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

Dorman C94030 Rear Passenger Side Parking Brake Cable Compatible with Select Chevrolet / GMC Models

  • Trustworthy replacement - engineered and tested to match the fit, function and performance of the original brake cable on specific vehicles.
  • Quality design - inner cables are sheathed and lubricated to provide improved durability.
  • Long-lasting construction - flexible casings are completely covered with conduit to prevent wear and tear of interior cables.
  • Tough materials - zinc-plated fittings prevent corrosion.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock