Best Conduit Compression Fitting

Maxline M8067 Elbow Fitting for 3/4-Inch Tubing (3 Pack)

3 Pack of the MaxLine M8067 Elbow Fitting for 3/4" Tubing.
Nickel plated brass fitting guards against corrosion.
Double O-ring compression style fitting, tubing can be removed from fitting if needed.

2 Pack of the MaxLine M8067 Elbow Fitting for 3/4" Tubing.
Nickel plated brass fitting guards against corrosion.
Double O-ring compression style fitting, tubing can be removed from fitting if needed.

【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
【Easy & Fast Remove】1.Remove the ....

Conduit Fitting Size: 3", Actual Hole Size: 3.5".
METRIC THREAD - Fits Draw Stud Size: M20x1.5mm (TEMCo THA010 and THA011). This DOES NOT fit TEMCo draw stud THA001 or THA100..
Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel.
Made of Hardened Tool Steel with Black Oxide Finish. Punches Materials: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only, not for use....

【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut....

Nut tightens and provides compression on the ferrule of a flareless fitting.
Chemically hardened type 316 stainless steel for higher strength and greater corrosion resistance than untreated stainless steel.
For use with a twin ferrule compression fitting set for a leak-resistant seal in high-pressure applications.

Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C).
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

【PREMIUM Liquid-Tight Conduit】- Length:50"，ID：1/2inch，OD：0.83inch，Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical....
【Complete Accessories】-1/2-Inch 50 Foot Flexible Electrical Conduit with 5 Straight and 390-Degree Conduit Connector Fittings.
【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments.
【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit....
【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment,....