Legines Brass Pipe Fitting Hex Bushing 3/8 NPT Male to 1/4 NPT Female 1200psi 2pcs
Hex bushing for connecting two pipes with different diameters.
3/8" Male NPT threads on one end and 1/4" female NPT threads on the other for connecting pipes with different ends.
Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250....
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
WarmGuard WG15 Insulated Drum Band Heater - Barrel Heater, Fixed Internal Thermostat Max Temp 145 F,Tan
PACKING INCLUDE:6 Pcs Combo Set Poly plugs for poly drums with BUTTRESS (Coarse threads) the other with 2" NPT (Fine Threads). 6Pcs 3/4" Knock Out NPT threads on both plugs. Includes White EPDM gaskets（12Pcs).
FOR TIGHT HEAD OR CLOSED TOP DRUMS: Coarse thread fits (2.48") 63mm American Buttress thread plugs while the fine thread fits 2.48" (63mm) NPS thread plug.
WILL FIT MOST POLY DRUMS: The coarse buttress thread caps with included gasket will fit most 15, 30 and 55-gallon poly drums and barrels.
DRUM ACCESSORY: These bung caps are for plugging the threaded bunghole at the top of poly drums and barrels.
WE GURARNTEE:For Any Reason You're Not Completely Satisfied, You Can Ask for A Replacement Or Full Refund.Just Use It with Confidence!.
Matte Black Trip Lever Tub Trim Kit Set with Trip Lever Overflow Face Plate No Putty Gasket,Trip Lever Bathtub Drain with Strainer Overflow and Matching Screws No Putty Installation by Artiwell
...TING: Artiwell Tip-Toe Tub Trim Set Coming with High Quality Brass , Zinc and ABS Construction ,designed for Long-Lasting Durability, Improving coating technology to improve anti-flaked off performance ,withstands longer lasting soaking in water..
STANDARD DESIGN: Designed to fit most tub and baths with the threaded bushing fitting 1-1/2 inch ,1-3/8” inch bath shoe sizes. This Drain can fit both 1-1/2" coarse thread and 1-5/8" fine thread Drain Shoe Sizes. Screw the brass adapter bushing on the Bath drain , the diameter is 1-13/16" , can be fit 1-1/2" coarse thread. Screw the brass adapter bushing off the Bath drain ,the diameter is 1-5/8" , can be fit 1-5/8" Fine thread..
TRUSTED QUALITY: Be confident in the quality and construction of each and every one of our products. We ensure that all of our products are produced to regional, national industry standards. We are proud of the products we sell, you will be too..
Carvedexquisitely Bulkhead Water Tank Fitting,1/2" NPT Female Thread,304 Stainless Steel Thru-bulk Fitting
Size:1/2" NPT female threaded,the actual diameter of 1/2" thread is 0.84 inch,NPT thread size is not the actual diameter, it is only nominal pipe size..
Bulkhead fitting are made of stainless steel, which is corrosion-resistant, rust-proof and has a long service life..
Note:The lock nut is Left-hand thread,and the external thread is used for the lock nut and cannot be connected to the pipe..
Wide range of uses: commonly used in water tanks, water towers, water inlets and outlets, self-made water storage buckets, rain buckets, and can also be used in various pipes, hoses, pipe fittings or faucets..
Bulkhead OD 25mm, suitable for about 25mm ID hole..
DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial
...sion systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
【ALL IN ONE SET】: Unique DOT Air Brake fittings Kit: The air brake fittings contain 34 pcs. 10 PCS: Male Connector 3/8" tube (NPT Pipe Thread: 2 pcs 1/2", 2 pcs 3/8" ), Male Connector 1/2" tube (NPT Pipe Thread: 2 pcs 1/2" , 2 pcs 3/8", 2 pcs 1/4"). 10 PCS: Male 90° Elbow connector 3/8" tube (NPT Pipe Thread: 2 pcs 1/2", 2 pcs 3/8" ), Male Connector 1/2" tube (NPT Pipe Thread: 2 pcs 1/2" , 2 pcs 3/8", 2 pcs 1/4&....
Drill America - POUCSNPT5 5 Piece NPT Pipe Tap Set (1/8\
Carbon steel Pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads.
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Round Shank with square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction.
