Best Conduit Ss Flexible Metal Conduit Whip

1/2 Npt Nonmetallic Liquid-Tight 180-Degree Electrical Conduit Connector Fitting,，UL Listed, (6 PACK) (1/2-180D)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

1-1/2inch Nonmetallic Liquid-Tight Electrical Conduit Connector Fitting,，UL Listed, (2 PACK) (1-1/2inch 180d)

  • THESE non-metallic connectors are molded from nylon 6 type, flammability rating 94V-2: temperature index 125 ° C.
  • NO disassembly is required, simplifying the installation of the wire, the installer can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
  • O-RINGS and steel locknuts for indoor and outdoor use, complete conduit / connector system reusable.
  • METAL connectors are resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.
Check Stock

Klein Tools 935AB1V Level, 2.5-Inch Conduit Bending Level, 1 Vial, ACCU-BEND Level Eliminates Dog-Legs in Offsets and Saddle Bends

  • Thumb screw attaches level to conduit to help eliminate dog legs when bending.
  • Large, easy-to-read high-visibility vial.
  • High-visibility orange body is easy to see on conduit and at the jobsite.
  • V-Groove fits contour of conduit and pipe.
Check Stock

IDEAL Electrical 31-057 Blue Steel Fish Tape – 240 ft. Blued Steel Fish Tape w/ Formed Hook & Tuff-Grip Pro Case, Non-Oily Finish, Laser Etched Increments

  • Pulling Tape: designed to assist in heavy-duty electrical applications, this tape is a reliable tool for electricians for longer conduit runs. It is laser etched in an increment of 12 in. to provide an instant conduit length for routing the wire in the electrical setup.
  • Premium Material: the fish tape is made using high-quality of carbon steel that boosts its lifespan, making it reliable for electrical conduit runs.
  • Impact Resistant: The Tuff-Grip Pro case and handle are impact resistant, while the unique design keeps the wire inside the case, even after a long fall..
  • Rust Resistant: the wire puller tape has a non-oily blue finish that makes it resistant to rust and corrosion, ensuring safe and smooth operation.
  • Product Specifications: The Ideal Electrical Conduit Tape with formed hook end and Tuff-Grip Pro case measures 1/8 x 0.060 in. It is available in a standard length of 240 ft. and offers 1,600 lb. of tensile strength.
Check Stock

Klein Tools 51606 Aluminum Conduit Bender Full Assembly, 1/2-Inch EMT, Wide Food Pedal, Benchmark Symbols and Angle Setter

  • 1/2-Inch assembled Aluminum Bender includes Klein’s unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
  • Includes markings for 10-Degree, 22.5-Degree, 30-Degree, 45-Degree, 60-Degree and corresponding offset multipliers.
Check Stock

Klein Tools 85191 Screwdriver / Conduit Reamer Conduit Fitting and Reaming Screwdriver for 1/2-Inch 3/4-Inch and 1-Inch Thin-Wall Conduit

  • Reamer's hooded-blade design keeps tip from slipping out of screws, especially when tightening hard-to-reach conduit fittings.
  • Reams and smooths 1/2-Inch (13 mm), 3/4-Inch (19 mm), and 1-Inch (25 mm) thin-wall conduit ends to protect wire and permit correct installation of....
  • Reams both the inside and outside of the conduit at the same time.
  • Longer Cushion-Grip handle provides comfort and more torque for reaming.
Check Stock

Jonard Tools ROD-3316 Coated Fiberglass Fish Tape Duct Rodder with Accessory Kit 3/16 x 300

  • CONDUIT RUNNING: Lightweight and portable, this rodder unit is perfect for running conduit inside and outside conduit drops as well as home drops from the hand-hole box to a building.
  • VERSATILE USE: Used for light pole wiring, control wiring, or walker ducts and rod can be pulled horizontally or vertically.
  • NON-CONDUCTIVE: Made with a non-conductive fiberglass core with a yellow nylon coating for high visibility and flexibility.
  • HIGH TENSILE STRENGTH: Can withstand loads up to 200 kgf (441 lbf) for quick and easy pulling.
  • LIGHTWEIGHT & COMPACT: 22” X 17” X 7” (55.88 cm x 43.18 cm x 17.78 cm) and weighing 14.33 lb (6.5 kg) for easy transportation.
Check Stock

IDEAL Electrical 31-06 Stainless Steel Fish Tape – 240 ft. Stainless Steel Fish Tape w/ Formed Hook & Tuff-Grip Pro Case, Non-Oily Finish, Laser Etched Increments

  • Pulling Tape: designed to assist in heavy-duty electrical applications, this tape is a reliable tool for longer conduit runs. It is laser etched in an increments of 12 in. to provide an instant conduit length for routing the wire in the electrical setup.
  • Premium Material: the fish tape is made using high-quality of stainless steel that is resistant to rust and corrosion. This boosts the lifespan of the tape, making it reliable for electrical conduit runs.
  • Impact Resistant: the wire puller tape has a finish that makes it resistant to rust and corrosion. It ensures smooth operation, making it a safe tool for routing the wires abrasive electrical environments.
  • Ergonomic Design: the replacement fish tape is carefully designed to keep the wires holstered within the case after a long fall. It is straight and stiff that maximize user convenience during the work.
  • Product Specifications: the Ideal Electrical Conduit Tape with formed hook end and Tuff-Grip Pro case measures 1/8 x 0.060 in. It is available in a standard length of 240 ft. and offers 1,600 lb. of tensile strength.
Check Stock

Klein Tools 51607 Aluminum Conduit Bender Full Assembly, 3/4-Inch EMT, 1/2-Inch Rigid, Wide Foot Pedal, Benchmark Symbols and Angle Setter

  • 3/4-Inch assembled Aluminum Bender includes Klein’s unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Easy handling aluminum head is reinforced for added strength.
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
Check Stock

Klein Tools 51605 Iron Conduit Bender Full Assembly, 1-Inch EMT and 3/4-Inch Rigid, Wide Foot Pedal, Benchmark Symbols and Angle Setter

  • 1-Inch assembled Iron Bender includes Klein’s unique Angle Setter technology for time-saving, repeated accurate bends.
  • Patent pending Angle Setter for use on 10-, 22.5-, 30-, and 45-Degree bends (adjusted for conduit spring back).
  • Heavy duty cast ductile iron has the durability needed on the job site.
  • Bold cast markings and symbols make for fast, easy conduit alignment to make all bend types, including saddle and back-to-back bends.
  • Wide foot pedal provides excellent stability, leverage, and comfort.
  • Interior hook surface prevents conduit from rolling or twisting during bends.
Check Stock