Best Connection Terminal Blocks

ARCELI Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA 2560 R3 DIY Soldered

  • PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
  • Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass..
  • Female Header Socket: Pitch 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs..
  • Note: This is not original Arduino product.it only a substitute accessories from ARCELI.
Check Stock

2Pcs Battery Terminal Connectors, 4 Way Positive Negative Car Battery Terminals Clamp Connector Quick Release Disconnect for SAE/JIS Type A Posts, for Marine Car RV (yellow)

  • Dimension - For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm. Minimum wire size: 16mm (5/8 inch ). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in..
  • Easy to use -The battery post terminals connectors are easy to identify with positive (red) and negative(black) labeled. Comes with 1 hex key for easy installation. Wiring is easy to modify and connection is firm. Batteries can be connected to the battery posts by pressing down the lever, so no tools are needed..
  • 4 Way Battery Terminal -The SAE battery terminals connectors has 4 posts for wire connection. Designed for multiple cable connections, mainly used for SAE / JIS TYPE A rear car battery..
  • Sturdy & Durable - The quick disconnect battery terminal made of tinned copper not only have good conductivity and corrosion resistance, but also can reduce voltage distortion and transmission loss..
  • Wide Application - Our battery terminal connectors suitable for Cars, Vans, Motorhomes, Caravan, Truck, Marine Batteries,etc. Just make sure to connect the correct terminal for the correct polarity. Works great with good electrical conductivity and corrosion resistance..
Check Stock

Opto 22 SNAP-PAC-RCK16 - SNAP PAC 16-Module Mounting Rack

  • DIN Rail mount 30Amp 300V 2x12 position screw terminal block distribution module. Support for multiple module extension connections..
  • A / B position maximum current 30Amp(each position). A1~A12 total maximum current 30Amp(total positions). B1~B12 total maximum current 30Amp(total positions). A1~A12 / B1~B12 position maximum current 20Amp(each position). Maximum voltage 300V..
Check Stock

Ampper Brass Battery Terminals Connectors Clamps, Top Post Battery Terminal Protector Set for Marine Car Boat RV Vehicles (1 Pair)

  • 1 Pair of military spec positive and negative standard top post connectors for increased strength and reduced corrosion..
  • Made of brass, + and - are directly marked on the terminal..
  • Used for battery extension, parallel connection, and ground connection..
  • Thread already on terminal, make it faster and easier for installation..
  • Used for Car, Vehicle, RV and Boat, which have a standard top post battery (19 mm tapering positive & 17 mm tapering negative)..
Check Stock

LotFancy Battery Terminal Connectors, 0/2/4/8/10 Gauge Positive Negative Battery Terminals for Car Audio, Marine, Truck, Boat, Motorcycle, with Spacer Shims, Covers, Wrench Tools, 1 Pair

  • 【Four Wire Outlet】Two 0/2/4 Gauge Inputs and two 8/10 Gauge Inputs. Designed for multiple cable connections. Wiring is easy to modify. Suitable for Most Battery models.
  • 【Positive Negative Terminal】Our positive Terminal is designed for a 17.5mm tapering post.
  • Negative Terminal is designed for a 15.9mm tapering post. Please confirm the tapered post size before purchasing. Our terminal connectors only work with standard top post tapered terminal, NOT include JIS Pensil Post.
  • 【Clamp Wires Tightly】The connectors are held in place with a screw and make a tight and secure connection. Easy to install and only requires two Alan wrenches.
  • 【Sturdy & Durable】 Zinc Alloy and Copper Material for Strong Electrical Conductivity, Super Corrosion Resistance, Reduce Current Transmission Loss. Also protects battery posts from corrosion for extended battery life.
  • 【Package Includes】2 x Battery Terminal Connectors, 2 x Adjustable Shims, 2 x Protective covers, 4 x Alan Wrenches. The provided Alan wrenches make for easy installation. The clear plastic covers clips on securely to protect the terminal.
Check Stock

TEMCo 4ga-750mcm HYDRAULIC LUG CRIMPER TOOL TH0034 - Electrical Battery Terminal Cable Wire

  • ❀【HIGH PRECISION JAW DESIGN】 Crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure. This tool has....
  • ❀【ROTATE CRIMP DIES】The professional cable terminal crimping tool has 6mm²/10mm²16mm²/25mm²/35mm²/50mm² (Similar to AWG....
  • ❀【EASY OPERATION】 Press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper....
  • ❀【ERGONOMIC DESIGN】The handle of the wire crimper is long for 10 inch and wrapped with soft rubber, ergonomic lever structure design can....
  • ❀【12PCS LUGS TUBULAR RING TERMINAL CONNECTORS】The crimper set contains 12PCS ring terminal connectors, save your time and money to buy other....
Check Stock

VOLT 300W LED Low Voltage Transformer (12V/15V)

  • ...dscape lighting system. No need to worry about voltage loss..
  • MODULAR TIMER WITH PHOTOCELL INCLUDED - Visible through the housing window, this timer can be set for simple dusk-to-dawn operation or set to turn off after a certain number of hours. The photocell is built into the timer..
  • EASY TO INSTALL - The clamp-type terminal blocks are impressively easy to use - taking seconds to connect - compared to many minutes of frustrating work for standard terminal blocks. Just insert the stripped wire and close the clamp! Accepts up to 10-gauge wire..
  • HIGH PERFORMANCE – This transformer's toroidal core allows for more reliable, efficient, cooler and quieter operation than comparable EI laminated types. It's also superior to electronic transformers, which may not be compatible with LED circuits, suffer from extensive voltage loss, and are subject to overheating and premature failure..
  • LIFETIME WARRANTY – With an industry-leading warranty, this Slim Line Transformer is designed for a lifetime of worry-free use - we guarantee it. The core, stainless steel enclosure and all electrical components are backed by our lifetime warranty..
Check Stock

Jonard Tools TK-17 Punchdown Tool Kit for 66/110 Blocks

  • SPECIFICALLY DESIGNED: Designed to repare and connect wire onto 66-type and 110-type punchdown terminal blocks.
  • TELECOM & NETWORK TOOLS: This kit has the tools needed for maintaining telecommunications and data communications networks.
  • INCLUDES: Punchdown Tool for 66 & 110 Blocks, 6-in-1 Mulit-bit Screwdriver, Ergonomic Electrician's Scissors, Cyclops Wire Stripper, LED Flashlight, Insluated Probe Pick, and Combo Crimping Pliers all stored in a Molded Tool Pouch.
Check Stock

HYCLAT Red 50A 6-10 Gauge Battery Cable Quick Connect Disconnect Electrical Motors Plug Wire Harness Plug Connector Recovery Winch Trailer (4 Pack)

  • Premium Material: These battery quick connectors are made of PC Fire-retardant materials, durable enough for for over 10,000 connect/disconnect actions..
  • Allows for quick connect/disconnect of power from winches, trailers, portable solar power system or other electrical devices..
  • Safe and Effective: Come with 8 pcs silver plated copper terminal pins, has strong conductivity and provide a secure connection between the panels and the solar controller..
  • Easy Installation: Insert the wires into the terminal pins, then solder or crimp them.
  • Insert the terminal pin into the connector and lock them in place..
  • 8x Terminal Pins. If you have any questions about our products, please contact us, we will get back to you within 24 HOURS..
Check Stock

2 Pcs RCA Terminal Gold Plated Copper RCA Panel Mount Female Jack Terminal Socket Audio Connector

  • [Copper Gold Plated] The terminal sockets is made of pure copper, gold plated for improving signal transfer and durability..
  • [Good Contact Performance] The terminal sockets has good contact performance, which is convenient and practical solder connection, and RCA jack female chassis connector for amplifiers, solder type..
  • [Suitable Size] This terminal sockets can fix 2mm thick panel, open 12mm diameter fixing hole..
  • [Good Elasticity] This terminal socket adopts phosphor bronze material so it has good elasticity, resistance to fatigue and deformation, ensure that the insertion is not loose, deformation, and good conductive contact..
  • [Guarantee] If you are not satisfied with the RCA socket you received, you can send emails to us at any time. We will reply you instantly and help you solve your problem..
Check Stock