Masmoc 4\ Metal Handwheel Fit 1/2\ Shaft of Table Saw Drill Press Lathe Turning CNC, Round Hand Wheel Crank Come with Set Screws and Disassemble Handle
This handwheel is designed with consumer convenience in mind,the item provides everything you all need including 4pcs SET SCREWS (2PCS is the backup one) and installing hex key wrench. Insert the shaft into the hole in the handle hub and tighten the provided set screw and a solid construction immediately is finished.It doesn't matter if the shaft is star, key-way, hexagonal, or smaller than 1/2”.
Handwheel Total Diameter: 100 mm / 4 inch, Center Bore Diameter (approx.): 12 mm / 1/2 inch. The package comes with 1 pcs round handwheel, 1pcs handle,4PCS SET SCREWS, 1pcs hex key wrench.
The hand crank wheel is made of metal material and the handle is made of high quality phenolic resin, with strong insulation and durability.
Masmoc handwheels is fit for 1/2” or smaller shaft but it can be expanded to expand the scope of use.
Widely used in industrial machine tools, such as Universal or horizontal - handle crank wheel on CNC milling machine bed.Universal or horizontal - handle crank wheel on CNC milling machine bed,Surface rotary Grinder Machine, Cylindical grinder, sharing machine,Boring machine, profile cutting machine, Turning CNC,Table saw, Band saw, Radial arm saw, Contractor saw, Cabinet Saw.
SainSmart Genmtisu CNC Router Machine Controller Board with ABS Case for CNC 1810-PRO/3018/3018-PRO
This controller board is designed for Genmitsu CNC Router 1810-PRO, 3018, and 3018-PRO. It can perfectly compatible with SainSmart Blue Laser Module..
Software: GRBL controller, UniversalGcodeSender..
Support XYZ three-axis control, spindle and laser module. Support 3 pin and 2 pin lasers (the 2 pin lasers: please connect the white interface " + s-")..
Support stepper motor: 12V, the maximum current within 2A, recommended within 1.5A and additional heat. (Any stepper motor 42, 57)..
Smatree S2C Carbon Fiber Extendable Pole Compatible for DJI OSMO Action2/GoPro Hero 10/9/8/7/6/5/4/3 Plus/3/2/1/Session Camera WiFi Remote Controller is Not Included
Made of high quality carbon fiber for durability and weight lighter.
Fixed tripod mount with CNC molded built-in nut, never mind about losing it.
Allows quick length adjustments from 15.8″ to 40.5″, fits for all gopro original cameras.
Smatree WiFi Remote Controller Housing allows you conveniently attach your WiFi remote controller to SmaPole S2C, so you can easily start or stop....
Lenink 4 Pack Mini T Track Hold Down Clamps, T-Track Clamp Compatible with 3018-PRO,3018-MX3,3018-PROVer,1810-PRO CNC Router Machine
Compatibility: The T-Track clamp kit is compatible with 3018-PRO/3018-MX3/3018-PROVer/1810-PRO CNC router machine, it can hold most of the materials of a desktop CNC router machine.
Portable and Practical: Adjustable T Track hold down clamps are very easy to install, can accommodate 30mm materials and hold them firmly in place.
Wide Range of Use: Not only suitable for 3018 series desktop CNC router machines, but also suitable for positioning and fixing other woodworking or metalworking, such as drill presses, CNC, table saws, routers, jigs, vertical milling machines, etc.
Strong and Sturdy: Made of high quality zinc-aluminum alloy, strong and wear-resistant, long service life.
Packaging Includes: 4 Pcs T-Track hold down clamps (Need to assemble by yourself). 6 months super long warranty period.
EANOSIC 30 Degree V Groove Router Bit 1/4 Inch Shank, Nano Blue Coated Solid Carbide V Router Bit for CNC Engraving and Carving
INDUSTRIAL GRADE CNC Engraving Bit: Shank: 1/4”.
SOLID CARBIDE AND NANO BLUE COATED: The 30 degree v groove router bit is made of solid carbide. And nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches..
SUPER LONG LIF The nano new design coating could provide up to 2.5X normal life and a much more smooth cutting edge than uncoated bits..
These are mainly used for engraving machine and CNC machine. A power tool for 2D sculpture, 3D sculpture. perfect for Signmaking, CNC Lettering, V Groove Engraving Artwork & Miter Fold Router Bits..
The CNC Engraving Bit used on soft and hard woods, particle board, MDF, plywood compact panel, laminate, acrylic, aluminum and etc..
Suuonee Vacuum Block, 6 Port Vacuum Block Intake Manifold Kit Fuel Wastegate Turbo Boost 1/8NPT for Racing
Application: This product is ideal for connecting pressurization controllers, instrumentation, and any components that require a separate vacuum source.You can also use tape for fuel and oil requirements..
High Quality: New universal supercharging/ vacuum manifold.Using high-quality CNC machine tools to process T6061 billet aluminum. The billet vacuum manifold is a great additional tuner that requires additional vacuum sources..
Widely Used: Includes 6X 1/ 8NPT aluminum fitting port for boost controller, map sensor, fuel pressure regulator, boost meter, blow valve and any other fuel/ ignition management component requiring a vacuum source..
Simple to Use: The design of a supercharger car and a single throttle body requiring multiple vacuum sources. The billet vacuum manifold is a great additional tuner that requires additional vacuum sources..
Service Guarantee: We provide 24-month worry-free warranty, if you meet any problems when using our devices, please feel free to contact us and our staff will reply in 24hrs. You can buy with no worry..
This bundle includes a FoxAlien 4040-XE cnc router machine and a 20W laser kit..
4040-XE CNC Router uses 300W spindle and NEMA23 stepper motors, which are more powerful and efficient. Max moving speed is 2000mm/min and spindle speed range is 0~10000..
Large engravable area of 15.75”x15.75”x2.56” (400x400x65mm). It’s capable to handle both small and large material. The CNC machine is based on GRBL, it is compatible with GRBL-control software..
The FoxAlien 20W engraving module features a new technology "light beam compression", which have excellent performance in engraving delicate jobs and details..
The focus distance is fixed by 30mm. The package includes a positioning block for easy focusing. Electrical output: 20W.
3 or 4 Axis USB 1.5KW/2.2KW CNC 6040T/6090T Router Engraver Engraving Mill/Drilling Machine + RC for PCB Badges Bronzing Plate etc (3 Axis USB 1.5KW CNC 6090T)
...ge of materials while also making clean up even easier with acrylic safety baffles to help contain dust and provide a safety barrier..
Take control of your 3018-PROVer Desktop CNC machine with controls at your fingertips. Now the 3018-PROVer comes with the upgraded offline controller. It has improved its compatibility with gcode and could jog each axis continuously with a long press of the button. Also, it equipped to diagnose 3 types of ERR and 9 types of ALARM error prompt messages..
CAD/CAM software to design then convert your ideas into instructions (GCode) that the router can understand and execute (common options are Carveco, Fusion360 and Easel). If you get stuck, check out the SainSmart Resource Center (see at User Guide) or contact us with any questions that arise..