Best Coolant Circulation Pump 2

KOLERFLO 3/4 Inch Hot Water Circulating Pump 3-Speed Circulation Water Pump for Solar Heater System(RS15-6 Red)

  • Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft).
  • Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia..
  • Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers.
  • Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water..
  • Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm..
  • The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas..
  • KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulat....
Check Stock

KOLERFLO 3/4 Inch 110V Circulating Water Pump Hot Water Circulation Pump/Circulator Pump for Hot Water System(RS15-6 Green)

  • Rated power: 93/67/46 W. NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Max pressure: 145 psi (10 bar),the circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft).
  • Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia..
  • Easy installation, only need a wrench to connect the pump to the pipeline, saving you the cost of plumbers.
  • Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water..
  • Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm..
  • The circulation water pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas..
  • KOLERFLO circulation water pump RS15-6 Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circ....
Check Stock

Master Cooling System Test and Purge Auto Kit by Steelman, 27-Piece Kit, Leak and Pressure Test, Vacuum Purge Kit, Storage Case Included

  • 27-PIECE KIT – Kit contains 27 pieces including 22 different test caps, a vacuum pump, pressure pump, cone adapter, and air bleeding / coolant hoses.
  • LEAK AND PRESSURE TESTS – Perform leak and pressure tests on cooling systems, radiators and heater cores, head gaskets, headers, and water pumps.
  • TEST RANGE – Test for cooling system leaks at up to 35 PSI.
  • VACUUM REFILL – Includes vacuum purge kit to refill coolant systems and prevent air lock / contamination.
  • COLOR CODED CAPS – Test adapter caps are color coded for easy identification.
  • FOREIGN AND DOMESTIC – Fits a wide range of foreign and domestic models including Ford, GM, Honda, Mazda, Audi, Nissan, Toyota, Chevy, and more.
  • STORAGE CASE – Kit comes with a convenient blow-molded red plastic case for easy organization and storage.
Check Stock

Three Bond High Viscosity Fast-Set Liquid Gasket Maker TB1217H

  • Sets to form an elastic body which is not affected by vibration or impact.
  • Maintains a stable rubber body over an operating temperature range of -76°F to 482°F.
  • Highly resistant to engine oil, various chemicals and coolant.
  • Use on the water pump, oil pan, valve cover, engine head, fuel pump, thermostat housing, oil pump and intake manifold.
Check Stock

GM 2.2 2.4L Water Pump Sprocket Retainer Ecotec 4 cylinder Cobalt Saturn Chevy

  • An excellent quality (alternative to the Kent Moore J-43651).
  • water pump holding tool that retains the coolant pump sprocket that is.
  • part of the timing chain system in position, during pump removal / installation, without the timing.
  • chain being disturbed and without the need to remove the front timing cover thus.
  • thus eliminating the need to re-time the camshafts..
Check Stock

Jet Tools CS-315, 315mm 1-Phase Ferrous Manual Cold Saw (414229), Standard

  • DURABILITY: Blade drive reduction gearbox operates in an oil bath..
  • FLOOD COOLANT SYSTEM: 1-1/3 gallon coolant reservoir and pump with flow control system extends blade life..
  • REPEAT CUTS: Fully-adjustable material depth stop for sawing repeatability and increased production..
  • MAXIMUM TORQUE: Hardened and ground direct-drive worm shaft, and bronze worm wheel, transmits maximum torque to the saw blade..
  • BURR-FREE CUTTING: Quick-clamping cam-action vise with adjustable gib and material support bar..
Check Stock

Bosch SHPM78Z55N 24" 800 Series Fully Integrated Pocket Handle Dishwasher with 16 Place Settings, Flexible 3rd Rack, InfoLight and CrystalDry (Stainless Steel)

  • The Bosch 00442548 Circulation Pump is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications.
  • Replacement BoschDishwasher Circulation Pump moves water through the spray arms to clean the dishes.
  • Bosch 00442548 Dishwasher Circulation Pump works on Gaggenau, Thermador, Kenmore, and Bosch appliances.
  • High quality Bosch OEM 00442548 Dishwasher Circulation Pump is 120V and 60Hz.
  • Repair your appliance with confidence when you choose Genuine Bosch Factory Certified Parts & Accessories.
Check Stock

Maxima 82964 Coolanol 50/50 Blend Performance Coolant - 64 oz. , Black

  • Formerly known as Supercool With WaterWetter.
  • Convenient, pre-mixed coolant for motorcycles, ATVs, karts etc. - pour and go.
  • Blended with purified, deionized water and proper WaterWetter percentage.
  • Reduces rust, corrosion and electrolysis, cleans and lubricates water pump seals.
Check Stock

Wire Harness Connector For Bosch Water Pumps Adapter Fitting

  • 12V DC Water /Coolant Pump for Radiator/Heat Exchanger. Perfect for Air to water Intercooler, Super Charger Applications..
  • Volume: 30L/Min (8 Gal/Min)- Inlet outlet: 3/4" (O.D.)- 9500rpm Brushless Motor- Voltage: 12V DC- Current: 2.8A±10%- Capacity: 30L/Min (8 Gal/Min or....
Check Stock

FEXON Fan Clutch Nut Wrench Compatible with BMW E34 E46 E90 E39 E36 Clutch Removal Tool Kit Replaces 70074 Fan Clutch Wrench Set 32mm

  • ...nd watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Specification: The radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21.2" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate..
Check Stock