Best Coolant Hose

6AN 5Feet Stainless Steel Nylon Braided Fuel Line Hose Oil Gas Hose Oil Line Hose Silver

  • 【Material】Outside Hose Material: Coverd with High Quality Nylon and Stainless Steel Wires.
  • Inner Hose Material: CPE Synthetic Material Hose..
  • 【CPE Braided Hose】Mostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Please notice that the service life might be shorter when it work with fuel..
  • 【Application】This braided hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect..
  • 【Performance】Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • 【Note】Not recommended installation in corrosive environment, braided fuel line's service life will be influenced..
Check Stock

Dorman 626-596 Engine Coolant Bypass Hose Compatible with Select Toyota Models

  • Direct replacement - this engine coolant bypass hose is designed to match the fit and function of the original hose on specified vehicles.
  • Restores functionality - reliable replacement for an original hose that has failed due to heat and fatigue.
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 626-595 Engine Coolant Bypass Hose Compatible with Select Chevrolet/GMC Models

  • Direct replacement - this engine coolant bypass hose is designed to match the fit and function of the original hose on specified vehicles.
  • Restores functionality - reliable replacement for an original hose that has failed due to heat and fatigue.
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

  • 6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
  • Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

6AN to 12mm Banjo Fitting Hose End Adapter - M12 | K-MOTOR

  • 6AN to 12mm Banjo fitting - Hose end adapter ( M12-AN6).
  • Compatible with 3/8 regular or 6AN braided hose.
  • Suitable for all fluids - Fuel, oil, coolant, water, air, etc...
  • Adapter for fuel rail, fuel filter, fuel pump, oil coolers, etc....
  • What's in the box: (1) Banjo adapter (2) Washers.
Check Stock

New HVAC Heater Core for Trailblazer Envoy Bravada Trailblazer EXT Envoy XL

  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications.
  • Engineered to resist electrochemical degradation – the leading cause of hose failure.
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover.
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications.
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C).
Check Stock

Diesel Water Parking Heater Hydronic Heater 5KW 12V Boat Caravan Motorhome Truck Camper Trailer Remote Control Diesel Water Heater Kit

  • PROTECT YOUR ENGINE ➤ The water heating type parking heater uses automobile coolant to exchange heat, preheats the engine and the cab, solves the problem of difficult engine startup at low temperature, greatly reduces air-cooled wear caused by low temperature startup, and extends engine life by more than 30%..
  • LESS FUEL PREHEATING ➤ Compared with cold-start engine preheating, the water heating parking heater preheating consumes less fuel. In the cold winter, you can warm up the engine and cab before getting on the car to drive away the severe cold. Improve the driving environment and no longer need a warm store..
  • FULL INSTALLATION SET ➤ 1 x Water Parking Heater, 1 x Auto Switch And Remote Control (Batteries Not Included), 1 x Water Pump, 1 x Wiring Harness, 1 x Tube, 1 x Oil Pump, 1 x Pump Holder, 1 x Fuel Filter, 1 x Oil Tube, 1 x Big Elbow, 1 x Small Elbow, 1 x Air Inlet Hose, 1 x Exhaust Pipe, 1 x Exhaust Silencer, 1 x Hose Holder, 1 x Cross, 1 x Air Filter, 6 x Short Pipe, 1 x Oil Extractor, 12 x Hose Clamps, 12 x Small Hose Clamp, 5 x Screwiv, 4 x Screw, 1 x Iron Stent..
  • TECHNICAL PARAMETERS ➤ Material: Metal &....
Check Stock

Acouto Radiator Filler Neck 21501-9HA0A Car Upper Coolant Radiator Filler Neck Replacement for Nissan Altima 2.5L L4 2007-2012

  • Reference OEM---- Reference OEM number: 21501-9HA0A. According to the original factory specifications, which is an ideal OEM replacement with the same form, fit and function as the OEM original part.
  • Fitment---- Car Upper Radiator Filler Neck is especially designed for Nissan Altima 2.5L L4 2007-2012. Please double check the part number of your item, matching information is for reference only.
  • High Quality Material---- The coolant radiator filler neck is made of high-quality plastic material, which is wear-resistant and durable, has long service life. The manufacture of the coolant radiator filler neck meets the strict quality requirements.
  • Easy to Install---- The installation is simple and does not require complicated operations, save time and effort. Ideal and direct replacement for old or damaged engine coolant filler neck, dependable to use.
  • Professional Manufacturing---- The radiator hose connector adopts professional manufacturing process, with stable performance, high precision and good reliability. Timely replacement of old or damaged upper radiator filler neck for better performance.
Check Stock

6 Pack Hose Clamp Pliers Hose Pinch Pliers Line Clamps for Fuel Hoses, Gas Lines Brake Hoses, Radiator Hoses, Coolant Hoses, Flexible Hoses, Red

  • 【3 Size to Select】6 hose pinch off pliers for all your projects.
  • measure 6-1/2 inch, 7-5/16inch, 10inch in length.
  • 【Non-Damaging Jaws】Hose clamp pliers are made of safe nylon ,Non-conductive, durable.Rounded jaw edges mean not damage your sensitive auto parts.
  • 【Locking in Place】Hose Pinch plier is designed with non-slip handle and safety buckle which can adjust the position of the buckle according to the size of the hose.
  • 【Easy Operation】Simply to grip the hose pinch plier on the hose and lock it with the safety buckle to free your hands, super easy and convenience.
  • 【Application】Great for use on brake hoses, fuel hoses, gas lines, coolant hoses, radiator hoses, lawnmower fuel gas lines and more.
Check Stock

EVIL ENERGY 10AN Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE 10FT Black

  • Application: AN10 braided fuel line widely used as transmission cooler line, fuel return line, fuel supply line, coolant fluid hose, engine cooler line..
  • Nylon and stainless steel braided fuel line can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Inside Diameter: 9/16". Outside Diameter: 0.78inch. Length: 10 Feet. Please measure before purchase!.
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock