Best Choice for Filling Automotive Cooling Systems. Fit on Most Domestic and Import Cars and Light Trucks, i.e. G.M, Nissan vehicles….
Smart Coolant Filling Funnel for drain refill of the coolant prevent Spills & Trapped Air as coolant filling application, the spill-free funnel eliminates trapped air pockets which usually cause erratic cooling system and heater performance.
No-Spill Filling Funnel Kit with 5 Caps (adapters) fits on most domestic and import carts, 2 pcs of 45 degree elbow allows use on radiator caps that are placed at an angle and 1 straight extension (5 inch) allow access to caps under shrouds.
The Spill Proof Coolant Filling Funnel Incorporates a Fluid Stopper with tube for trapped air.
Tight attach the plastic tube on fluid stopper end to bleeding trapped air pockets out while filling the coolant to prevent unsteady pressure with cooling system. These air pockets accumulate over time can cause overheating by impeding the flow of coolant through the system.
ABN Coolant Funnel Kit Radiator Spill Free Funnel Auto Coolant Flush Kit No Spill Funnel Radiator Funnel Fill Kit
PERFORM TESTS & REFILL FLUIDS: The ABN | Cooling System Refiller Kit Coolant Burping Funnel Radiator Flush Kit prevents squeaky belts and spills when changing radiator coolant, flushing systems, vacuum filling, or replacing hoses.
Connects to radiator and seals for hands-free work so you can fill fluid level higher than radiator (allows for coolant expansion) to remove trapped air pockets or head gasket combustion leak bubbles that can otherwise cause cooling system errors and heater issues.
FITS YOUR VEHICLE: Antifreeze funnel kit works on any vehicle filled through the radiator (not the expansion tank).
The included straight extension and 45-degree elbows allow access to caps located under shrouds or in fender wells.
Works in any hard-to-reach area and can be combined to use on radiator caps that are placed at an angle.
BUILT TO LAST: 6.75-inch x 8.25-inch (17.1cm x 21cm) overall with 0.75-inch (1.9cm) outside diameter (OD) coolant fill funnel tip that securely fits the included adapters of different sizes.
While there are no measurement markings on the coolant spill free funnel, it can hold a maximum of approximately 70 ounces (2.1 L).
Constructed from opaque yellow hard-plastic components.
3 out of 5 cap adaptors include steel rings to hold the ada....
Replacement Coolant Reservoir Tank - Compatible with Freightliner Vehicles - Cascadia, Century Class, Columbia, Coronado, FLD020SD, M2 106, M2 112 - Replaces 525263005, A05-25263-006, A0533118000
Replacement Coolant Reservoir Tank - The coolant tank contains coolant fluid that is discharged from the cooling system attached to the engine. Pressure builds up and released when the coolant is hot and expanding through the radiator and when the engine cools down, the excess fluid flows back into the radiator from the coolant tank of your freightliner vehicle..
Compatible Replacement for Freightliner Vehicles - 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Freightliner Cascadia | 08, 09, 10, 11 Century Class | 10, 11, 13, 14, 15 Columbia | 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 Coronado | 2011 FLD120SD | 2014, 2016 M2 106 | 2008-2019 M2 112 |. If you are experiencing leaks, low level of coolant and overheating engine then you may have a problem with your coolant reservoir tank..
Replaces Part# A05-25263-006, 525263005, A0525263005, A0525263007, A0533118000, 603-5203 commonly found on popular Cascadia, Century Class, Columbia and Coronado vehicles including models 08, 09, 10, 11, 12, 13, 14, 15, 16 17, 18, 19. The coolant reservoir tank can easily be located on the engine bay mounted on the engine near and connected to the radiator..
CMTOOL Radiator Pressure Tester Kit with Universal Rubber Adapter, Updated Coolant Pressure Tester Kit Coolant Vacuum Refill Kit, Automotive Cooling System Pressure Tester Kit with Carrying Case
【Upgraded Multifunctional Cooling System Pressure Tester Kit】The radiator pressure tester kit includes everything you need to quickly and easily test vehicle radiator system leaks and refill coolant, improve vehicle service life, and keep your vehicle running smoothly. Thanks to its universal rubber adapter, the coolant pressure tester master kit is compatible with almost all domestic and imported vehicles on the market. So whether you are a DIY-er or a professional, this set has you covered..
【Durable Radiator Pressure Tester with Good Airtightness】The radiator pressure tester uses high-quality aluminum pump cylinders instead of ordinary plastic pump cylinders, 21" rubber nylon resin hoses and brass fittings to ensure durability and good airtightness. The coolant leak detection kit can quickly find Whether there is abnormal leakage (About 10 minutes). The accurate shockproof meter (3 inches), the dial uses color code design to make the data clear and easy to read. (0-35psi/0-2.5bar).
【Car Coolant Vacuum Refill Kit with 47.24-inch Transparent Hose】The transparent coolant filling hose is convenient for observing the supply status of the coolant, and the joint is equipped with a brass filter to avoid the inhalation of metal or other impuritie....
VACUUM TYPE COOLANT FILLING FUNCTION: Pneumatic vacuum coolant filler first sucks and forms a vacuum on the cooling system by using shop air, then draws coolant into the cooling system.(Need vacuum pump and not included in the kit) Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine. Normally, it takes 5-10mins to refill the coolant, the exact time depends on the size of the tank. Easy to operate and save time.
WIDELY USAGE RADIATOR PURGE AND ANTIFREEZE REFILL TOOL: JIFETOR antifreeze filler kit includes a universal tapered rubber adapter, with MIN. diameter 1.5CM and MAX. diameter 5CM, fits for almost all types of vehicles. The adapter can replace the radiator cap to seal the cooling system, and connect with the quick coupler on coolant refiller to help to fill antifreeze..
WATER TANK COOLANT VACUUM REFILL: Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosion and durable. The index range of gauge is -30~0inHg (-76~0cmHg), and normally -25~-20inHg is right time to add coolant. 18" rubber resin material weave reinforced hose, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Also there is a 21" metal chain hoo....
uxcell Thread Milling Taps 7/16-14 UNC High Speed Steel HSS 4 Straight Flutes Machine Screw Thread Threading Tap 5 Length Extra Long
accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy..
High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping..
Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min.
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..
uxcell Thread Milling Taps 3/8-24 UNS High Speed Steel HSS 3 Straight Flutes Machine Screw Thread Threading Tap 5 Length Extra Long
accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy..
High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping..
Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min.
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..
uxcell Thread Milling Taps 1/2-13 UNC High Speed Steel HSS 4 Straight Flutes Machine Screw Thread Threading Tap 5 Length Extra Long
accuracy class: H2. Straight flute design, downward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy..
High Speed Steel: High speed steel tool has high hardness and toughness, wear resistance, heat resistance. Features just the base substrate without any coatings, good for general purpose thread tapping..
Applications: Suitable for processing through holes or shallow blind holes . Used for drilling and tapping aluminum, stainless steel, copper, hard plastics, etc.. Use with tapping oil to get higher quality threads and more durable taps..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Recommended feed rate: general steel: 6-15m/min.
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use or electric drills use is not recommended. Please add coolant when tapping and apply anti-rust oil for maintenance after use to prolong the service life..
