Best Copper Based Board Pcb

Delfield 3516459 3.00 X 7.00 Receiver

  • Directly printing inductor traces on the PCB board greatly simplifies the difficulty of assembly..
  • 12V power supply, 9.2 x 7.5cm PCB board size, which can be directly used in 97 x 40 x 75mm aluminum chassis.
  • It is specially used to receive the call between the aircraft and the tower. With the antenna with good performance (VHF band Yagi antenna), the open area can receive various types of aircraft and tower calls within about 190Km. Please pay attention to your favorite friends..
  • The AGC circuit on the board ensures comfortable listening, while the squelch function avoids long-term noise..
  • The kit uses a band-pass filter, 3355 high-amplifier, NE602 mixing, MC1350 mid-amplifier solution, which can receive AM signals of 118-136MHz..
Check Stock

risingsaplings RSP pi pico io Breakout Board 2.54mm Male Female or 3.81mm Terminal for Raspberry pi pico (3.81 Terminal (1pcs))

  • The item has been soldered and assembled, support for Raspberry Pi Pico..
  • The terminal block label can clearly identify the position of the functional pins..
  • FR-4 fiber glass PCB, dual copper layers. 2x20 positions header connect to Raspberry Pi board..
Check Stock

YoungRC New XT30 Lipo Battery Parallel Charging Board XT30U Plug Connector 2S-6S 40A for IMAX B8 UN A6 Balance Charger DIY

  • The ParaBoard is compatible for IMAX B8, UN-A6 charger..
  • Support 6 pairs 2S, 6 pairs 3S, 6 pairs 4S, 6 pairs 5S, 6 pairs 6S balance charge..
  • Thicken PCB copper foil, allow security using 40A charging current..
  • This parallel board can be used for batteries with JST-XH type balance plug and XT30 connectors..
  • Add cascade port, can be infinite cascading expansion of the charging port..
Check Stock

iFlight SucceX 50A 2-6s ESC 32bit BLHeli 32 4-in-1 ESC with Telemetry Pad Built in Current Sensor DSHOT600 for FPV Racing Drone Quadcopter

  • ● SucceX 50A 32bit BL Dshot1200 4in1 ESC was designed to give your motors smooth power with great stability and durability.
  • ● The STM32F051 is combined with high-performance 3-in-1 driver, Outbreak faster speed.
  • with 6-layer PCB board, 4oz 1.6mm thick power board(0.9mm copper ratio),better operating load capacity.
  • ● TDK MLCC Low ESR ceramic capacitors and NTMFS5C430NL MOSFET that provides high efficiency and better heat dissipation.
  • ● Standard 30.5*30.5 Φ3mm mounting holes.
  • Vibration and shocks can be perfectly avoided by adding dampers.
  • Rational layout design with extended solder pads ensures easy builds, fixes or adjustments.
  • ● 6s ESC support Dshot Up to 1200, support: Dshot150/300/600/1200, MultiShot, OneShot.
Check Stock

Auxbeam H4 9003 HB2 Led Light Bulbs H4 9003 Led Conversion kit 52W 10000lm 6500K CSP LED Chip Fog Light F-F2 Series

  • 【300% Much Brighter】H4/9003/HB2 LED fog light bulbs with 360° illumination CSP LED double-sided chips, clear beam no blind zone, no dark spots or....
  • 【Better Beam Pattern】H4/9003/HB2 Led bulbs with 0.04ich ultra-thin chip copper board to ensure great focused beam pattern, which improve the....
  • 【Built-in CPU & EMC 】 H4/9003/HB2 LED bulbs built-in constant current CPU, instant full brightness without start-up relay. Upgraded PCB board....
  • 【Better Cooling & Longer Lifespan】H4/9003/HB2 led fog light bulb with high speed mute fan (12000R/Min) system keep the light bulb in appropriate....
  • 【Easy Installation】1:1 Ratio Design. Original car interface and chuck design. Direct replacement, just plug and play, non-polarity design. Before....
Check Stock

Professional welding tools and desoldering tool sets (12 pieces), desoldering pumps, desoldering wicks, wire cutters, tweezers, welding wire, soldering iron auxiliary accessories

  • Tool Kit:Suitable for electronic repair and DIY, any circuit board with small parts, such as mobile phone motherboards, cables, TVs, VCRs, radios, headphones, stereos, motors, toys and other electronic equipment. Correct the error of the small board on the PCB..
  • Tool Kit:includes 6 welding aids and desoldering pump, desoldering core, Wire cutters, anti-static ESD tweezers, 0.8mm solder wire.
  • Welding auxiliary tools: widely used in electronic repair, soldering, desoldering, etc. Can use cutting, scraping, hooks, brushes and other welding work requirements. Cutting pliers: Made of high-quality steel, it can accurately cut flexible cords within 1mm. Anti-static ESD tweezers: Made of high-quality stainless steel, anti-static, non-sticky..
  • Desoldering pump: very sturdy, can remove excess solder on the circuit board, easy to operate with one hand, desoldering core:width 2.5mm / 0.098 in,length 1.5m / 59 in length, made of pure oxygen-free copper It has a strong ability to absorb tin. No cleaning is required and less residue. Solder wire: 0.35 ounces / 10 g.
  • Tool Kit: Contains 12 necessary welding tools to save you multiple purchases..
Check Stock

ADT-Link R44SF / R24SF M.2 NVMe SSD Extension Cable Solid State Drive Riser Card Support M2 to PCI Express 3.0 X4 PCIE Full Speed 35G/BPS(R24SF 10CM)

  • Wire advantages: Using the German patent imported wire, using the Lotes connectors which imported from Taiwan, high frequency support PCIe 3.0 X16 8G/bps stable transfer..
  • Cable length: Our wire has a low impedance, the cable below 60cm can be stable at PCIe3.0 full speed reading and writing..
  • Differential signal without hole design, there is no problem of signal attenuation interference in a parasitic capacitance and parasitic inductance, there will be no more CAF micro short circuit, cable is durability..
  • PCB use high frequency low resistance of materials with high quality, PCB using high TG board, copper thickness thicken to 1oz, gold finger plating enough gold, Good conductive performance, can reduce oxidize higher impedance caused by the crash blue screen..
  • R24SF ,Connector 1: PCIe x4 ,Connector 2: M.2 NVMe SSD.
Check Stock

Padarsey Upgraded XT30 Parallel Charging Board for 1S 2S 3S LiPo Batteries Compatible with XT30 JST JST-PH 2.0 Connector LiPo Batteries

  • 1) High quality XT30 connector charger board..
  • 2) Support 6 packs XT30 1S or 3S LiPo batteries balance charger(note:do not leave your battery charging with this device unattended)..
  • 3) Thicken PCB copper foil, allow security using 20A charging current..
  • 4) Balanced port output line with 18AWG multi-strand silicone line..
  • 5) Equipped with 20A fu-se protection between any two groups of batteries, to handle the large battery pressure..
Check Stock

18V 5.0Ah 4.0Ah 3.0Ah Replacement Battery Plastic Case for Milwaukee 18V M18 M18B 48-11-1820 48-11-185048-11-1828 48-11-10 Li-ion Battery Cover Part

  • Li-ion Battery Plastic Case M18 Shell Charging Protection Circuit Board For Milwaukee 18V M18 48-11-1815 3Ah 4Ah 5Ah PCB Board.
  • only have Circuit Board(PCB) Plastic Case ,Screw, Spring (NO BATTERY).
  • Completely protection and replacement for original Battery.
  • Designed 100% compatible and easy to repair the broken circuit board.
  • Quick-responding technical support for free.
Check Stock

NOBVEQ RJ45 Ethernet Splitter, RJ45 1 Male to 3 x Female LAN Ethernet Splitter Adapter Cable Suitable Super Cat5, Cat5e, Cat6, Cat7 LAN Ethernet Socket Connector Adapter

  • ...d forth cable. Without the need for a router, extending an RJ45 socket to three standard 8P8C designs(When one device is using the network, the other devices need to be powered off or disconnected)..
  • [Simple to Use & Plug and Play]: No drivers are required. 8 core pure copper gold-plated conductor, steady signal transmission, superior contact, and transmission performance, provides a powerful guarantee to high-speed data transmission..
  • [2mm Thick PCB Board]: 2mm thick PCB board embedded conductive circuit to avoid damage to the conductor leakage. Ensure a longer service life. It can also be used as an extension, it is made of high-quality materials and has fast transmission. The fixed RJ45 female interface shields external electromagnetic signal interference to prevent damage to the Internet signal..
  • [Note]: This is not a router, the three devices can't surf the Internet at the same time! When one port is connected to the network, other portable devices must be disconnected..
Check Stock