Best Copper Bushing Bushes

FreeTec 52-in-1 Custom Bushing Driver Set, Bearing and Seal Driver Transmission Bushing Removal Puller Bearing Press Tool Kit

  • Package contains: you will receive 6 pieces reducing bushing adapters in 3 sizes thick bench grinding wheels, enough for your daily use and replacement.
  • 3 Sizes included: the length of 6 pieces reducing bushing adapters is the same size, which is suitable for thick bench grinding wheels.
  • 2 Pieces ID 1/2 inch x OD 5/8 inch, 2 pieces ID 5/8 inch x OD 3/4 inch and 2 pieces ID 3/4 inches x OD 1 inch, 3 sizes would be provided for you.
  • Quality material: the reducing bushing adapters are made of quality stainless steel, rust-prevention and hard, could apply for a long time.
  • Nice performance: the reducing bushing adapters are easy and simple to be applied, which will not be deformed or broken easily.
  • For effective operation: these adapters of various sizes can be operated with a bench grinder for variable operation, but also improve your working efficiency.
Check Stock

2 pcs Brass Bearing Bushing,Inner diameter4mmx Outer Diameter 8mmx Height 6mm/Side Outer Diameter 12x2mm for Machining Router.

  • ✅ Material:Made of brass material, which is conductive, corrosion resistant, and non-magnetic..
  • ✅ Features: Bearing copper bushing Oil impregnation enables sliding velocity and makes them suitable for rotating applications..
  • ✅Most suitable for applications with rotating movements and where self-lubricating properties of the material are a prerequisit..
  • ✅ Versatile: Ideal for Used in micro motor, household appliances, electric tools..
  • ✅If you have any questions about the product, please feel free to contact us, and we will do our best to help you..
Check Stock

MICTUNING 125 250V 50Amp Heavy Duty RV Female Replacement Receptacle Plug with Ergonomic Handle

  • SUPER HEAVY DUTY - Rated at 125/250V 50A female plug, suitable for replacing the old/worn out receptacle on 6AWG/3C+8AWG/1C RV extension cord, perfect for RV, Camper, Caravan, Motorhome, etc.
  • SOILID RV PLUG - Adopts well-conductive copper parts and flame retardant ABS plastic housing, with strain relief clip and bushing to fix the cord, more stable and safer wire connection!.
  • EFFORT SAVING HANDLE - Design of ergonomic handle on the back, makes it easier to plug-in and unplug, better saving physical strength!.
  • EASY TO REPLACE - Come with a clear and easy-enough instructions for simple installation, even if a green hand can do it well within minutes!.
  • WHAT YOU'LL GET - 1x 50Amp RV Female Receptacle, 1x Instructions and MICTUNING 100% Satisfaction Customer Services, please feel free to contact us if there's any issue..
Check Stock

Martin 2517 1 1/2 Taper Bushing, Sintered Steel, Inch, 1.5\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 1008 5/8 Taper Bushing, Sintered Steel, Inch, 0.62\ Bore, 1.386\ OD, 0.875\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Marker Duke PT 16 125 Ski Binding Adults

  • Convenient solution - this shift cable bushing assortment directly replaces a broken bushing and eliminates the need to replace the entire cable assembly.
  • Save time and money - save the expense and significant installation time of replacing an entire cable assembly.
  • Ensure fit - this bushing assortment is vehicle-specific and precision-engineered for specified General Motors, Chrysler and Saab models and years.
  • Trustworthy quality - designed in the United States and backed by more than a century of automotive aftermarket excellence.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

MICTUNING 125 250V 50Amp Heavy Duty RV Replacement Male Plug with Ergonomic Handle Yellow

  • SUPER HEAVY DUTY - Rated at 125/250V 50A male plug, suitable for connection of 6AWG/3C+8AWG/1C RV cord, perfect replacement for the old or worn out plug of RV, Camper, Caravan, Motorhome, etc.
  • SOILID RV PLUG - Adopts well-conductive copper pin and flame retardant ABS plastic housing, with strain relief clip and bushing to fix the cord, more stable and safer wire connection!.
  • EFFORT SAVING GRIP HANDLE - Design of ergonomic grip handle on the back, makes it easier to plug-in and unplug, better saving physical strength!.
  • EASY REPLACEMENT - Come with a clear and easy-enough instructions for simple installation, even if a green hand can do it well within minutes!.
  • WHAT YOU'LL GET - 1x 50Amp RV Plug, 1x Instructions, plus MICTUNING 100% Satisfaction Customer Services, please feel free to contact us if there's any issue..
Check Stock

Martin 2517 2 7/16 Taper Bushing, Sintered Steel, Inch, 2.44\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2517 1 1/4 Taper Bushing, Sintered Steel, Inch, 1.25\ Bore, 3.375\ OD, 1.75\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock

Martin 2012 1 5/8 Taper Bushing, Sintered Steel, Inch, 1.63\ Bore, 2.75\ OD, 1.25\ Length

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts.
  • Sintered steel for greater strength and resistance to wear than steel.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Interchangeable with taper bushings from various manufacturers.
Check Stock