Best Copper Cu Target

Amprobe TH-3 Relative Humidity Temperature Meter 2 Display

  • Air/Acetylene Soft Flame Kit has always been the Old Reliable flame tool for plumbers.
  • Produces a precise 2700 Degrees Fahrenheit target heat for soldering and brazing copper tubing.
  • Capable of soldering up to 1/2 inch and brazing up to 3/8 inch copper tubing with supplied tip.
  • Torch Handle with rear control valve for accurate gas control and positive shutoff.
  • Acetylene Regulator for MC Tank with protective rubber gauge boot.
Check Stock

300' 6/3 UF Underground Feeder Direct Earth Burial Cable

  • #14 AWG Wire with Annealed (Soft) Copper (Cu) Conductors.
  • Used Indoor for Wet or Corrosive Locations, Resistant to Light and Moisture.
  • Used Outdoor for Direct Earth Burial, Resistant to Sunlight and Moisture.
  • Has a Heat Capacity of 90 Degrees Celcius and is Rated for 600-Volts, Has an Allowable Ampacity of 15 Amps.
  • Color of Wire May not be the Same as the Picture Shown..
Check Stock

Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers

  • Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
  • Copper (Cu): Rest. For the best results..
  • Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
  • Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application：The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

Partol Carburetor Carb 2 Barrel Compatible with Ford Mustang F150 F250 F350 Comet Engine 289 Cu, 302 Cu, 351 Cu Wagoneer 360 Cu - Automatic Choke

  • Compatible with Ford Mustang 1968~1973 Engine 289 Cu, 302 Cu, 351 Cu / Ford F150 1964~1978 Engine 289 Cu, 302 Cu, 351 Cu / Ford F250 1964~1978 Engine 289 Cu, 302 Cu, 351 Cu / Ford F350 1964~1979 Engine 289 Cu, 302 Cu, 351 Cu / Ford Comet 1964~1982 Engine 289 Cu, 302 Cu, 351 Cu / Wagoneer 1964~1978 Engine 360 Cu.
  • Improve throttle response for better engine performance. Mounting gasket & seal included.
  • Add More Horse Power While Maintaining Near Stock Fuel Mileage Directly Replace the Old / Broken One.
  • Improve throttle response for better engine performance, add 5~10% horsepower and maintain near stock fuel mileage.
  • Part Number: 2100,A800. Package: 1x car carburetor..
Check Stock

NENKUTEN 2 Barrel Carburetor 2100 2150 A800 Carb for Ford 289 302 351 Mustang Cu Jeep Engine F100 F150 F250 F350 Jeep 360 Cu with Electric Choke Gasket Float Level Ruler

  • 【Premium Quality】: Brand New Premium quality 2 Barrel Carburetor 2100 2150 for Ford 289 302 351 Cu Jeep Engine F100 F250 F350 Jeep 360 Cu with Electric Choke, The carburetor is made of high quality aluminum alloy for durability, helping your car run at peak performance, 100% tested before shipment, perfect choice to replace your defective carb assembly..
  • 【Fits】: Fits for Ford Mustang Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1968-1973.
  • for Ford F100 Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1978.
  • for Ford F150 Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1978..
  • 【Fits】: Fit for Ford F250 Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1978.
  • for Ford F350 Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1979.
  • for Jeep Wagoneer Engine 360 cu in (5.9 L)1964-1978.
  • for Ford Comet Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1982..
  • 【Package】: 1x Carburetor, 1 x Mounting Gasket, 1 x Seal Ring, 1 x Float Level Ruler. As shown in the picture..
Check Stock

DEWALT Cable Crimping Tool, Dieless (DCE350M2)

  • The cable crimpting tool has #8 - 750 McM Cu / 750 Al crimping capacity for copper and aluminum cable and connectors.
  • Crimp Connect software of the battery cable crimping tool provides detailed reports of work done.
  • Onboard diagnostics of the cable crimper indicates battery life successfully completed cycles, service needed, and operating temperature range.
  • Guard rails help to protect crimping head when crimping small diameter cable.
  • Bright LED light helps to illuminate work area.
Check Stock

GELUOXI Carburetor Two 2 Barrel Carburetor Carb 2100 2150 Compatible with Fo rd F100 F250 F350 Mus-tang Mer-cury 289 302 351 Cu Engine,Compatible with J-e-e-p Engine with Electric Choke

  • carburater Part Number: 2100A800 / 2100-A800. Package include: 1*Carburetor. 1*Mounting gasket. 1*Seal. All our accessories are professionally tested at the factory. Please make sure the project is suitable for your model before purchasing..
  • Compatible with: Fo-rd Mu-stang Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1968-1973.
  • Fo-rd F100 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1964-1978, Fo-rd F250 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1964-1978.
  • Je-ep Wa-goneer SJ Engine 360 cu in (5.9 L) V8 1964-1978..
  • Compatible with: 1964-1978 Je-ep Wa-goneer 360 Cu 5.9L.
  • 1968-1973 Fo-rd Mus-tang 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L.
  • 1964-1978 Fo-rd 100 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L.
  • 1964-1978 Fo-rd F250 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L.
  • 1964-1979 Fo-rd F350 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L.
  • 1964-1982 Mer-cury Comet 289 Cu 302 Cu 351 Cu 4.7L 5.0L 5.8L..
  • Compatible with: Fo-rd F100/F250/F350 with 289 302 may also know as 2-Barrel Carburetor, F250 Carburetor, F350 Carburetor, F100 Carburetor, 289 Carburetor, 302 Carburetor, 351 Carburetor, 351 Carburetor 2 barrel, 2100 carburetor, 2150 carburetor, 2100 Carb, 2bbl carburetor, 302 carb,carburetor 2 barrel f100, 2100 A800 carburetor..
Check Stock

maXpeedingrods 2 Barrel Carburetor for Ford 289 302 351 Cu F100 F250 F350 Mustang Comet,for Jeep Wagoneer 1964-1978 360 Cu Engine 2100 2150 Electric Choke with Mounting Gasket 302 Carburetor Carb

  • 【Wide Compatibility Carburetor】Fit for Ford Mustang Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1968-1973.
  • for Ford for F100 Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1978.
  • for Ford for F250 Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1978.
  • 【Wide Compatibility Carburetor】Fit for Ford for F350 Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1979.
  • for Ford Comet Engine 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) 1964-1982.
  • for Jeep Wagoneer Engine 360 cu in (5.9 L)1964-1978.
  • 【Fit for Engine】 2-Barrel replacement carburetor for 289 cu in (4.7 L) 302 cu in (5.0 L) 351 cu in (5.8 L) engine.
  • 【Add More Power】Add 5~10% horsepower for better engine performance,give your machine the new power it deserves.
  • 【Specifications】Type: Automatic/Electric choke .Material: Premium Aluminum Alloy Structure.Part Number: 2100 A800.Venturi Size:29.5mm=1.16inch.
Check Stock

(Cut by The Foot) 8/3 UF-B Underground Feeder Direct Burial Wire

  • #10 AWG Wire with Annealed (Soft) Copper (Cu) Conductors.
  • Used Indoor for Wet or Corrosive Locations.
  • Has a Heat Capacity of 90 Degrees Celcius and is Rated for 600-Volts, Has an Allowable Ampacity of 30 Amps.
  • Color of Wire May not be the Same as the Picture Shown..
Check Stock

2 Barrel Carburetor Carb 2100 A800 2150 for Ford 289 302 351 Cu Jeep Engine F150 F250 F350 with Electric Choke Mounting Gasket - 302 Carburetor / 351 Carburetor 2-Barrel / 2150 Carb

  • Compatible with: Jeep Wagoneer 1964-1978 with 360 Cu Engine, for Ford Comet 1964-1982 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L), for Ford F350 1964-1979 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L).
  • Carburetor Fit for Ford Mustang Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1968-1973,for Ford F100 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1964-1978,for Ford F250 Engine 289 cu in (4.7 L), 302 cu in (5.0 L), 351 cu in (5.8 L) 1964-1978.
  • Part Number: 2100 A800, 2100-A800, 2100A800.
Check Stock