Pipe Cutter, Tubing Cutter Tool 1/8\ to 1-1/8\ Outer Diameter, Copper Pipe Cutter, Mini Tube Cutter for Thin Metal and PVC Pipe, Pipe Cutter Tool for Copper, Aluminum, Thin Stainless Steel Pipe
High hardness blade: The blade of this pipe cutter is made of high-strength manganese steel, which can cut metal thin tubes, and it is equipped with a standby blade..
Wide Application：The copper pipe cutter can be used to cut copper pipe, aluminum pipe,galvanized pipe,corrugated tube,PVC and thin stainless steel tube..
Reasonable Design：The tubing cutter is attached with a bearing, fitted on the roller to make the rotation more smoother and clean..
Sturdy and durable:The metal cutter tool is made of stainless steel except for the rotating handle made of plastic to ensure its durability..
Including deburring tools:There is a deburring tool attached with the pipe cutter tool, made of sturdy steel. It can deliver quick, clean and easy inside diameter reaming of different tubes..
Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool
【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut....
HOTYELL Electric Pipe Threader, Upgraded Pipe Threading Machine Uses Pure Copper Motor, Portable Handheld NPT Threader Kit with 6 HSS Dies 1/2"-2"
✅ Pure Copper Motor: Upgraded copper clad aluminum motor to 100% pure copper motor, and use latest silicon lamination stator, more durable, quieter and more stable. Our pipe threading machine specifications are: 110V, 2300W, rated spindle speed: 26 r/min..
✅ Aluminum Alloy Die Heads, 5.43 lb Lighter than Cast Iron: Completely eliminates the problem of easy fracture of cast iron, lighter, stronger and more durable. 6 die heads included: 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2", threading range: 20.9 - 59.6mm..
✅ High Speed Steel Dies: Cooperation with the HTINS Institute of Metal Research, we upgraded the carbon steel thread dies of our pipe threader machine to high speed steel dies, stronger and more durable, clearer thread, and the precision is higher..
✅ 6 Brushes: Many maintenance workers and industrial and mining enterprises absolutely love our portable handheld NPT threader kit, portable, complete specifications, convenient and efficient. 6 brushes provide you with more protection..
✅ Satisfied Customer Service: Professional manufacturers n....
RIDGID 10973 122XL Copper Cutting and Prep Machine, 1/2-inch to 4-inch Pipe Cutting Machine
Designed to cut, clean and deburr copper tubing and fittings (Types K, L and M).
also cuts and deburrs stainless steel tubing with a maximum wall thickness of 0.065 inches (1.65 mm).
Rugged cast aluminum housing and powerful 1/3 HP induction motor for long tool life.
convenient carry handle for easy transport.
Reamer removes burrs from inside of tubing and brush cleans external surface to prepare for joining.
machine also includes accessories to clean inside of fittings and clean burrs from outside surface.
Copper pipe cutter has an adjustable handle to accommodate different diameter tubes and a handy built-in 1/2-inch (12 mm) incremental scale for quick and easy measuring.
Includes outside diameter cleaning brush, cone reamer, outside diameter deburring disk, fitting brush kit and operator's manual pack.
Bravex Tubing Bender Pipe Tube Bender Kit Refrigeration Ratcheting Hand Tool 1/4 to 7/8 Inch with Tube Cutter/Deburring HVAC Tool Refrigeration System Maintenance
Suitable Tube Sizes: 1/4“, 5/16“, 3/8“, 1/2”, 5/8“, 3/4“, 7/8”, the maximum bending angle is 90 degrees, supports reverse bend. Bends pipes in both “forward” and “reverse” configurations..
The pipe bender is made of 40Cr steel & 45# steel with high precision machining. The aluminum alloy tube bender heads (replaceable) are firm and durable, preventing pipe deformation. The super long handle increases the leverage, making this tool both convenient and labor-saving..
Comes with pipe cutter, suitable for cutting heavy and hard materials, such as thin stainless steel (thickness.
Also includes a deburring tool made of solid plastic structure and high-speed steel bald head. It can quickly, cleanly and easily enlarge the inner diameter of different pipes (such as copper, aluminum, PVC and stainless steel pipes)..
If the pipe crack when bent,try heating and cooling to soften the pipe,and it will make perfect bends. Applications：automobile maintenance, refrigerator maintenance, Hvac work, hydraulic systems, etc..
Disconnect Tongs Tool with Depth Gauge and Pipe Deburring Tool Combination Set for Push to Connect Fittings Removal Tool for Disconnect Clamp for 1/2",3/4",1" Plastic PEX CPVC Copper Pipe Fittings
【Package Includes】1 pcs disconnect tongs tool.
1 pcs deburr &gauge tool .the disconnect tongs have 3 size teeth available, can easily remove the push fit fitting from pex, cpvc or copper pipe of 1/2 inch, 3/4 inch or 1 inch.it can deburr the cut end of the pipe & bevel the cut edge, ensure complete seal and smooth connection..
【Quality Material】the push to connect fittings removal tool is made of 40cr steel and tpr coated grips prevent slippage in wet conditions and one-handed operation for in-tight situations.good grips, hefty build to allow your free hand the ability to assist in the removal of fittings..
【Deburr and Gauge Tool】 deburring tool is made of lightweight and durable pvc.ideal for marking pipe depth and deburring..deburring tool is compatible with 1/4 to 1 inch sized pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe.
【Fast Disconnection】 simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly. deburring pipe and depth gauge tool, easy measure insertion depth and deburring pipe after pipe is inserted..
nuwfrog Tubing and Pipe Cutter 1/4 to 2-5/8 Inch with Extra Blade for Pipe Copper Thin Stainless Steel Tube
【Efficient and convenient】 The operation of cutting Thin Stainless Steel Tube, Metal,Brass - Copper Pipe Tubing from 1/4"-2-5/8" (6-64mm) O.D. becomes more easy, clean and efficient. However, we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
【Fine workmanship】High-quality alloy steel grinding blades, extremely sharp.The body is made of lightweight,durable aluminum alloy casting..
【Versatile】This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops..
【Ergonomic design】Knob provides a firm grip. Cutting tubes become a comfortable and quick task..
【EXTRA BLADE】Our pipe cutter also comes with an extra blade so you can cut as much steel tube as possible. We truly believe our Pipe Cutter is the best in the marketplace and we stand by that. If our tube cutter doesn’t cut it, we’ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confidence..
ATNHYING Automotive Tubing Bender Brake Line Bending Tool Brass Tube Bender Pliers for 3/16 Inch 1/4 Inch,for Brake Fuel Line
Size: Can be used for copper pipes with diameters of 3/16 and 1/4 inches..
Function: Tube bending pliers are used to bend copper pipes in brakes, brake systems, and fuel lines..
Features: The unique bending design makes it easier and more convenient to straighten, bend and adjust the copper pipe in the line.It can greatly reduce the damage to the copper pipe, and greatly reduce the difficulty and strength of the operator's work..
Quality: The tube bender pliers adopts forging technology and heavy-duty structure which is durable..
Handle: Rubber handle, ergonomic design. Comfortable to hold and non-slip..
