Best Copper Plumbing Fitting

Drainx Bio Enzymatic Drain Cleaner and Maintainer Solution | | Drain Hair and Clog Remover, 1 Gallon, 128 Fl Oz

  • Drainx Drain Cleaner and Maintainer Solution clears up grease, soap, fats, food, waste and scum which causes drains and plumbing to run slowly and helps maintain your appliances. Use it in floor drains, grease traps, for commercial or any industrial application..
  • Reduces buildup in pipes and drain lines. Keeps drains and plumbing flowing freely while reducing and eliminating odors..
  • Easy to use, works fast and goes directly to the source of the problem - even in cold or standing water..
  • Safe on all plumbing pipes - copper, plastic, pvc, degrading pipes, septic systems, garbage disposals..
  • DrainX manufactures a variety of quality tools for both the do it yourself-er and the professional. We know that sometimes things can get a bit messy. We are here to help! Please contact us with any questions or concerns. All our products also come with a 1-year warranty and hassle-free returns..
Check Stock

SharkBite 3/4 Inch x 1/2 Inch Reducing Coupling, Pack of 12, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U058LF

  • SHARKBITE BRASS PUSH REDUCING COUPLING: This push-to-connect fitting allows you to make a connection between two different-sized pipes in any combination.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The SharkBite brass reducing couplers allow for easy installation, with no tools, crimping, glue, or soldering required.
  • can be installed in wet lines and approved for underground and behind-the-wall applications with no access panels.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • SPECS: Made with DZR forged brass, this brass reducing coupling can withstand 200 degrees F and 200 PSI.
Check Stock

Drainx Bio Enzymatic Drain Cleaner, Opener and Maintainer Solution | Drain Hair and Clog Remover, 1 Quart, 32 Fl Oz

  • Drainx Drain Cleaner and Maintainer Solution clears up grease, soap, fats, food, waste and scum which causes drains and plumbing to run slowly and helps maintain your appliances. Use it in floor drains, grease traps, for commercial or any industrial application..
  • Reduces buildup in pipes and drain lines. Keeps drains and plumbing flowing freely while reducing and eliminating odors..
  • Easy to use, works fast and goes directly to the source of the problem - even in cold or standing water..
  • Safe on all plumbing pipes - copper, plastic, pvc, degrading pipes, septic systems, garbage disposals..
  • DrainX manufactures a variety of quality tools for both the do it yourself-er and the professional. We know that sometimes things can get a bit messy. We are here to help! Please contact us with any questions or concerns. All our products also come with a 1-year warranty and hassle-free returns..
Check Stock

Vinco s - OsteoSheath4 - 120 Tablets by Vinco

  • Package Including: 20 Ft Braided Fuel/Oil/Gas Line Kit(10pcs 6AN hose fitting + 20Ft AN6 Stainless Steel Oil line).
  • Universal Application: The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas....
  • Hose Material: Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The fitting is made of T6061 Aluminum,high strength and good durability..
  • Working Temperature: -40 F to +248 F. Working Pressure:500 PSI.
  • Excellently Sealed,100% no leaking .Exchange or return if leak..
Check Stock

Weld-On 14030 Plumbing PVC/CPVC Primer - Fast Acting and Low VOC, Clear, 1 Quart (32 fl oz)

  • Fast-acting plumbing primer pre-softens surfaces to ensure proper PVC/CPVC welding - an essential first step before application of plumbing solvent cement.
  • Quickly dissolves joining surfaces to promote maximum fusion between pipe and fitting during welding.
  • Clear color helps prevent staining while priming.
  • Compatible with all schedules, sizes, and classes of PVC and CPVC.
  • Meets SCAQMD Rule 1168/316A, ASTMF656, NSF/ANSI 14, and NSF/ANSI 61 performance specifications.
  • contributes toward satisfying Indoor Environmental Quality credits for LEED v4.
Check Stock

Stampede Stills Copper Quart Widemouth Mason Jar Thumper Kit with Quart Jar Sleeve

  • Made from 20 ounce copper sheet, silver based lead-free solder, gasket, and is 1/2" copper pipe. The inlet pipe has an elbow to prevent hot spots on....
  • 1/2" copper pipe stubbed out for easy plumbing to your existing still. Additional pipe/coupling/unions to connect to your setup are NOT included as....
  • The Stampede Stills Quart jar insulator is great for all drinking occasions and works well to insulate the jar during use..
  • Works on widemouth mason jars (setup requires prior ownership of quart jar and band to work).
Check Stock

PVC- 4 way L/T 2' (Furniture Grade White)

  • DO NOT use these fittings for plumbing projects..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • All four outlets are non-threaded sockets.
  • 2" Fittings fit on 2" Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • Furniture Grade means this fitting has a non-marked, glossy finish..
Check Stock

1-1/2" 4-way Tee PVC Fitting Connector

  • Furniture Grade means this fitting has a non-marked, glossy finish..
  • DO NOT use these fittings for plumbing projects..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • 1-1/2″ Fittings fit on 1-1/2″ Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • All four outlets are non-threaded sockets.
Check Stock

SharkBite U3088FLEX18BVLFA Flexible Water Heater Connector with Ball Valve, 3/4 inch x 3/4 inch FIP, Push-to-Connect Braided Stainless Steel, Water Heater Hose, SILVER

  • INSTALLS IN SECONDS: 18” Water heater flex hose line connections require no special tools, no soldering, or glue. Just push to create a watertight seal. Includes integrated ball valve supply shutoff.
  • COPPER, PEX, CPVC: SharkBite water heater line plumbing fittings fit Copper, PEX, CPVC and PE-RT. Use for both hot and cold water heater supply lines.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F and can be reused up to four times in potable and hydronic heating water distribution.
  • RESIDENTIAL and COMMERCIAL: SharkBite water heater supply line connectors meet the same standards for commercial and residential plumbing applications. Inspector friendly for a peace of mind..
Check Stock

SharkBite 3/4 Inch x 3/4 Inch x 1/2 Inch Reducing Tee, Pack of 6, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U412LF

  • SHARKBITE BRASS PUSH REDUCING TEE: This push-to-connect fitting can be used when joining two different-sized pipes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing tees work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass reducing tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this reducing tee can withstand 200 degrees F and 200 PSI.
Check Stock