Best Copper Tube Butt Welding

Pure Nickel Strip- 99.6% Nickel for 18650 Soldering Tab for High Capacity Lithium, Li-Po Battery, NiMh and NiCd Battery Pack Battery and Spot Welding, a U.S. Solid Product (0.2x8x100mm, 100pcs)

  • ✅【High Quality & Multifunctional】：This adjustable spot welding tool is made of aluminum alloy material, with anodic oxidation surface, wear resistant and beautiful, fire-proof and anti-fall. 2mm Thickened pure copper strip and imported MOS tube can save energy and can provides longger service time. The welding machine itself has overcurrent protection, low voltage protection, overvoltage protection, and overtemperature protection. Intelligent output current. Can guarantee safe use..
  • ✅【Quick Input & 9 Gears Adjustable】：This spot welding equipment adopts Type-c interface, 4 hours fully charge under 5V 1A input. Built-in high-rate polymer power cell, the maximum output current is up to 650A, and it can continuously weld thousands of points after being fully charged. 9 gears of output power adjustable, 1gear(lowest) and 9gear(highest)..
  • ✅【With Charging Control Module & Indicator Light】:With output power and remaining power indication, there are two output modes: 1.5s timing trigger output and automatic detect welding pen output. ---This spot welding kits tools has 4 dual-color indicator lights, the power indicator flashes when charging.When all four lights are on, it is fully charged.It will automatically shut-down after 15 minutes of....
Check Stock

Silver Brazing Rod BCuP-5 20 Flat Bar Welding Stick JAgP-15 15% Silver Phos Welding Rods 0.050 x1/8 x14 for Air-conditioners Refrigerators and Freezers

  • Material: The package includes 20PCS 15% Silver Brazing Rods BCuP-3.Silver (Ag) 4.8-5.2%.
  • Copper (Cu): Rest. For the best results..
  • Standard: The BCuP-5 silver brazing rod containing 15% silver, is equivalent to the American standard AWS BCuP-5 national standard BCu88PAg and L205. It has certain plasticity and is suitable for welding of copper and its alloy joints that cannot maintain a tight fit. Melting point 645-815 degrees Celsius..
  • Advantage: The low temperature phosphor silver welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 704-816℃, good fluidity during welding, molten metal can flow to small gaps.
  • Application：The brass brazing rod is used for brazing of silver & silver alloy in motors, air-conditioners, meters, and refrigeration industry,Widely used in brazing of copper and copper alloys in electrical machinery, electrical appliances, glasses and other industries.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

Forney 32110 E7014 Welding Rod, 1/8-Inch, 10-Pound

  • All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
  • Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
  • Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Check Stock

YaeTek 12PCS Oxygen & Acetylene Torch Kit Welding & Cutting Gas Welder Tool Set with Welding Goggles

  • Application - Welding and Cutting -- This YaeTek gas welding torch kit is used for cutting, welding, heating, with precision and efficiency..
  • Material -- heavy duty metal and brass, with high strength, durability, longevity. This welder torch Kit tool set is a great choice for both an amateur metalworker or a professional..
  • With a divisional box, convenient and easy to carry..
  • Packages Includes -- 3 copper pines, 1 welding pine connector, 1 cutting, 1 aluminum pin, 1 iron chrome-plated igniter, 2 copper joint, 1 wrench, 1 welding goggles, 1 storage box.
Check Stock

IBOSAD Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool 12 AWG to 00 2/0 Electrical Terminal Wire Crimping Plier Kit,Marked with AWG

  • Crimps 12 AWG to 2/0 AWG size copper and aluminum wires..
  • The crimping dies are marked with 12,10,8,6,4,2,1/0,2/0 AWG.
  • The head can be rotated 180° freely to benefit narrow space working, a good choice for battery and welding cables, power wires, electrical cables,....
  • Made of durable materials with high strength and good toughness..
  • With this professional crimper, you can crimp wires and butt connectors easily. It is much easier than using a pair of hand crimpers. It provides with....
Check Stock

Performance Tool W704C Copper and Brass Tubing Bender for Vehicle Maintenance on Breaks in Garages and Workshops, Silver

  • For copper and brass tubing, brake lines and bundy welding tube..
Check Stock

Forney 32005 E7014 Welding Rod, 3/32-Inch, 5-Pound

  • All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
  • Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
  • Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Check Stock

Uniweld KCHP Cap n Hook Brazing/Welding Outfit Tanks Not Included

  • Professional contractor grade portable oxyacetylene welding and brazing outfit-tanks not included (sold separately).
  • Cap'n hook five flame tip for brazing up to 1" copper tubing-u's Patent no. 4,191,333.
  • Welding/brazing tip for brazing up to 1" copper tubing and welding up to 1/8" steel.
  • Centurion series regulators with Protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate Gas control.
Check Stock

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

  • 【WIDE APPLIACTION】Manually Operated HDPE butt fusion welding machine is suitable for PE and PP pipes and fittings. High quality design and construction provides an excellent machine for welding both on the worksite and in the factory.
  • 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
  • Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
  • 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
  • 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
  • The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
  • 【EASY TO USE】Electric milling method is adopted, with single ....
Check Stock

4pcs 0.5mm 0.7mm 1.0mm 1.5mm Gold Silver Copper Welding Rods,Flexible and Durable Soldering Wire for Jewelry Making Kit Welding Materials

  • ✿【Premium Material】100% brand new, made of high-quality copper, smooth surface, easy to form, no cracks, durable, economical and practical..
  • ✿【4Pcs/Package】The number of copper wires: a total of 4 wires, thickness and diameter: 0.5mm, 0.7mm, 1.0mm, 1.5mm bare copper wire jewelry beaded wire. The sturdy structure (4 pieces) can be used for a long time..
  • ✿【Quality Copper】Copper wire characteristics: low melting point, easy to melt and weld. Commonly used in gold and silver welding, K gold welding, silver welding, brazing, etc..
  • ✿【Multiple Specifications】Diameter: 0.5mm, 0.7mm, 1.0mm, 1.5mm inches are cost-effective and cost-effective jewelry making. You can use this copper wire to make unique jewelry for your friends and family..
  • ✿【Widely Applicable】Wide range of uses: Colored copper wire can be used for beading, crafting and jewelry making of bracelets, earrings, necklaces, pendants, etc..
Check Stock