PLANET AUDIO AC2500.1M ANARCHY Class AB Monoblock Amp (2,500W max; 1,500W x 1 @ 4_) Consumer Electronics Accessories
Cone - The advantage of a paper cone is its rigidity and able to handle high power and functionality You don’t want the cone of a subwoofer to have a flexible structure to it The stiffer the cone is the better sound quality you will receive.
Voice Coil - Our copper voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. Making our voice coils with this material gives our speakers the advantage of longer play times with lower weights.
Surround - Foam is very flexible providing the subwoofer with higher efficiency This also translates to better excursion (How far the cone of a speaker linearly travels from its resting position).
Basket - Cast Aluminum is an ideal material for heat sinking letting the subwoofer run cooler It will allow a larger amount of current to be put into the voice coil by drawing away and dissipating the heat more efficiently.
Specs - Resonant frequency 28 Hz Sensitivity SPL (1W/1m) 83 Db Impedance 4 Ohms Port frequency 35 kHz Dimensions 13” x 13” x 8 5” Mounting Depth 7 83” Mounting hole 11 13” Weight 21....
5 CORE 6″ Inch Subwoofer Car Audio 300W Peak Power Sub Woofer Loudspeaker Wide Range High Power Bass Surround Sound Stereo 4 Ohm, 8oz Magnet Car Speakers with PP Cone Red, WF 672 PP
6″ 4-Ohm Car Subwoofer. Peak Power Handling: 300 Watts. CEA Rated RMS Power Handling: 30 Watts 1″ High-Temperature CCAW Voice Coils Kapton Paper Wound with 100% Copper Wire. Voice coil with High-Quality Precision copper available in Kapton/ Aluminum heat sink, highly insulated with Methanol. Specially designed Woofer Cone for bass effect.
8oz High-Quality Magnet 4-Ohm Cast Steel Body with Pre-treated Woofer Frame which gives a beautiful finish and makes this Car Subwoofer Very Efficient. Kapton/Aluminum Heat sinks for proper Heat Dissipation and voltage Sustain Ability. This 6 Inch Subwoofer comprises of Foam Edge Cone/PP prepared for a crisp and soothing sound..
Cones Used for making this car audio subwoofers are Ultra-Stiff. They are thicker and stronger than other subs on the market making our woofers able to handle more power. Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion. Highly flexible Spider/Damper used for accurate cone movement..
Foam Edge Cone/PP Reinforcement Ensures Long Life. Impedance: 4-Ohm Voice Coils. Low Carbon Forged Iron T-yoke and washers with approved Y-30 Ferrite Magnet Enhances Heat Dissipation in subs. Advanced Air Flow Cooling System..
5 Core uses highly adhesive in the assembly of the Speake....
RMS Power = 500-watts | Xmax = 14mm one-way by 70% BL | Vented magnetic gap.
Vented pole piece with optimized geometry | Black Aluminum 2.5” voice coil former for superior heat dissipation | High Temperature 4-Layer copper voice coil wire.
Spring Loaded Terminals | Stitched-On “Mini-XL” Tinsel Leads to prevent fatigue and failure.
Specifications: DC Resistance (Re): 4.0 Ω | Resonance Frequency (Fs): 32.2 Hz | Equivalent Volume (Vas): 19.4 L | Electrical Q Factor (Qes): 0.38 | Mechanical Q Factor (Qms): 4.76 | Total Q Factor (Qts):0.35 | Force Factor (BL): 20.2 NA | Moving Mass (incl. Air Load) (Mms): 192.0 g | Suspension Compliance (Cms): 0.13 mm/N | Sensitivity: 84.2 dB 1w / 1m.
Box Recommendations: Sealed: 0.5 cu ft | Ported: 1.0 cu ft | Displacement: 0.11 ft^3 | Cutout Diameter: 8-7/8" | Outside Diameter: 10" | Depth: 5 5/8" | Recommended Tuning: 32hz | Recommended Port Area: 16 in^2.
