Best Core Cutting Machine

MaxTool 5\ TCT Hole Saws 127mm Carbide Tipped Holesaw 2.25\ Deep Cut for Cutting Asphalt Brick Concrete Gypsum Limestone Tile Wood MDF; CT00Y57R500

  • The best cutting for asphalt, brick, concrete, dry wall, gypsum, Limestone, marble, MDF, tile, wood, composite, plastic, etc.
  • Carbide Tip Pilot Drill bit is required for cutting some materials.
  • 2-1/4“ Cut-Depth allows for easily cutting through thick or layered building materials in one pass.
  • Quality Carbide Teeth have high hardness, outstanding wear resistance, a tendency to stay sharper to cut fast abrasive tough material.
  • Multiple Knock-Out slots and Wide Gullet Big Chip Clearance for easy core removal (rapid core eject).
  • Thick hardened back plate prevent warping.
  • Optimized teeth penetrate material easily and have equal smoothly cutting load with min vibration.
  • It is easier to use electric power tools.
Check Stock

MaxTool 8-1/16\ TCT Hole Saw 205mm Carbide Tip Holesaw Arbored Pilot Bits Cutting Asphalt Brick Concrete Gypsum Limestone Tile Wood MDF; CT00Y57R804A

  • The best cutting for asphalt, brick, concrete, dry wall, gypsum, Limestone, marble, MDF, tile, wood, composite, plastic, etc.
  • Carbide Tip Pilot Drill bit is required for cutting some materials.
  • 2-1/4“ Cut-Depth allows for easily cutting through thick or layered building materials in one pass.
  • Quality Carbide Teeth have high hardness, outstanding wear resistance, a tendency to stay sharper to cut fast abrasive tough material.
  • Multiple Knock-Out slots and Wide Gullet Big Chip Clearance for easy core removal (rapid core eject).
  • Thick hardened back plate prevent warping.
  • Optimized teeth penetrate material easily and have equal smoothly cutting load with min vibration.
  • It is easier to use electric power tools.
Check Stock

MaxTool 4-1/2\ TCT Hole Saw 114mm Carbide Tipped Holesaw 2.25\ Deep Cut for Cutting Asphalt Brick Concrete Gypsum Limestone Tile Wood MDF; CT00Y57R432

  • The best cutting for asphalt, brick, concrete, dry wall, gypsum, Limestone, marble, MDF, tile, wood, composite, plastic, etc.
  • Carbide Tip Pilot Drill bit is required for cutting some materials.
  • 2-1/4“ Cut-Depth allows for easily cutting through thick or layered building materials in one pass.
  • Quality Carbide Teeth have high hardness, outstanding wear resistance, a tendency to stay sharper to cut fast abrasive tough material.
  • Multiple Knock-Out slots and Wide Gullet Big Chip Clearance for easy core removal (rapid core eject).
  • Thick hardened back plate prevent warping.
  • Optimized teeth penetrate material easily and have equal smoothly cutting load with min vibration.
  • It is easier to use electric power tools.
Check Stock

JINGLING 10\ inch Diamond Lapidary Saw Blade Thin Notched Rim 1.2mm Trim Stone

  • Product Name: 10 inch lapidary saw blade, lapidary trim saw, 10" gem saw.
  • Performs well in cutting most types of rock, from soft petoskey stone fossils to hard jasper.
  • Super-thin rim, achieving satisfactory cutting results and reducing unnecessary material consumption.
  • More diamonds in the notched rim/ stiffer core make this blade cut faster, provide a long use-life.
Check Stock

Delta Diamond Brick Boss 14 Inch Diamond Blade, 1\-20MM Arbor, Wet/Dry Cutting Brick, Pavers, Stone (14\)

  • BRICK CUTTING - Use Brick Boss diamond blades for cutting brick (up to 5,000 psi), most types of stone such as granite and quartzite and similar materials. Not intended for use on materials such as concrete, asphalt, concrete block or sandstone..
  • EXTRA WIDE U SHAPED SLOTS - Features 10MM tall diamond segments with deep and wide U shaped slots. The wide slots allow for better cooling and faster removal of the cutting debris, thereby increasing cutting speed..
  • HEAT TREATED HIGH-SPEED STEEL - The core is made from heat-treated high-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - Blade measures 14" diameter X .125 (1/8") thick with a 1" arbor hole and 20mm bushing for Stihl power saws. It can be used on masonry saws, hand-held power saws and bridge saws. Operating RPM is 2,500. Max. safe RPM is 5,460..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the d....
Check Stock

We-buys Cutting Dies C Plate Replacement Adapter Mat Clear 5.9'×7.6'

  • Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting.Plate thickness is 3mm.
  • Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
  • The see-through PC plastic allows easy placement of materials for a precise die cut..
  • Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
  • The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock

Vacuum Brazed Drill Bit Diamond Hole Saw 30mm Angle Grinder Hole Saw Brazed M14 Thread for Drilling Marble

  • This is hole opener, can improve work efficiency, fine workmanship and super wear resistant.This hole opener has pointed head, fast drilling speed, and a large displacement cutting design..
  • This is a hole opener specially designed for dry core drilling for granite mining at the work site. Vacuum brazing side protection provides clean cutting and steel core protection. Long service life, to ensure smooth cutting without chipping..
  • The hole opener is made of high-quality diamond material, which is strong, stable, impact-resistant, safe and durable, and has high toughness, which ensures the service life of the product..
  • The tip of the hole opener adopts a large-displacement cutting design, which improves the drilling speed and saves time and effort. Suitable for drilling granite, ceramic tiles, concrete, marble and other materials..
  • If you do not satisfy with our item or if you have any questions, please contact us. We would work out satisfactory solution to your problems, money back or replace new. Customer satisfaction is our goal, so please rest assured to buy!.
Check Stock

Diamond Core Drill Bit Set - BRSCHNITT Diamond Hole Saw Kit for Porcelain Tile Ceramic Marble Granite Drilling Triangle Shank 11pcs 6/8/10/20/25/28/32/35/50/65mm bits &2“ Chamfer bit

  • ... ✔Super Quality Raw Material --Using vacuum brazed technology ,which increases resistance to temperature and friction,to make the diamond particles better attach to the core steel,imporve the performance and lifetime.Constructed with high grade diamond grit for effortless cutting and improved durability in tough applications.High-quality core steel body helps to be more efficient and durable, not easy to deform.
  • ✔Machine --Suitable for any electric drill,hand drill,Bench Drill, When use Angle Grinder,please install angle grinder drill chuck.
Check Stock

Twisted Gold Cord for Crafts, Sewing, Upholstery (36 Yards, 2 Rolls)

  • Twisted Cord Trim: Use this gold cord for crafts to add a decorative trim on armchairs, sofas, upholstery, curtains, and furniture.
  • Easy Application: To apply the gold rope, simply glue, hand sew, or use a sewing machine to adhere the gold rope trim onto any clean, smooth surface.
  • Endless Uses: The gold cord can also be used to separate church pews at an upcoming wedding ceremony or to add elegance to invitations, scrapbooks, and gift boxes.
  • Reliable Quality: To avoid exposing the inner core after cutting, we recommend burning to ends of the gold rope ribbon together.
  • Dimensions: Each gold trim rope roll measures 0.2 inches x 36 yards in length.
Check Stock

SHDIATOOL 12 Inch Diamond Saw Blade Cutting Porcelain Tile Ceramic Granite Marble Brick

  • Diameter 12"(300mm)，bore 1"(25.4mm) with 1"-20mm arbor, Segment thickness 2.0mm, Dry or wet cutting,.
  • The cutting disc is Designed for cutting porcelain tile ceramic granite marble brick ect.
  • Super Thin X Turbo Segments provide chip free and fast cutting.
  • Reinforced ring core on both side of blade, make cutting more stable and get better finishing.
  • Hot-pressed sintered blade with very high quality diamond grain provide long working life.
Check Stock