SharkBite 3/4 Inch x 1/2 Inch Reducing Coupling, Pack of 12, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U058LF
SHARKBITE BRASS PUSH REDUCING COUPLING: This push-to-connect fitting allows you to make a connection between two different-sized pipes in any combination.
remove using a disconnect clip or disconnect tongs.
VERSATILE: Pushfit reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
EASY TO INSTALL: The SharkBite brass reducing couplers allow for easy installation, with no tools, crimping, glue, or soldering required.
can be installed in wet lines and approved for underground and behind-the-wall applications with no access panels.
PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
SPECS: Made with DZR forged brass, this brass reducing coupling can withstand 200 degrees F and 200 PSI.
Oatey 30246 PVC Regular Cement and 4-Ounce NSF Purple Primer Handy Pack
ALL-PURPOSE CEMENT AND PURPLE PRIMER HANDY PACK: Includes one 4 oz. can of all-purpose clear cement and one 4 oz. can of purple primer for PVC pipe....
REGULAR CLEAR CEMENT: Recommended for potable water, pressure pipe, conduit, and DWV applications, and it flows freely and sets up quickly at the....
INDUSTRIAL-GRADE PURPLE PRIMER: Recommended for use on CPVC/PVC pipe and fittings of all schedules and diameters, and it is for use in areas where....
AGGRESSIVE PRIMING: Formulated to remove surface dirt, grease, and grime as well as soften the pipe surface to allow for a fast, secure, and permanent....
COMPLIANCE: Both the cement and primer are certified to UL Greenguard Gold, NSF and UPC approved, exceed ASTM Standard D2564 and ASTM F 656, and....
SharkBite 3/4 Inch x 3/4 Inch x 1/2 Inch Reducing Tee, Pack of 6, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U412LF
SHARKBITE BRASS PUSH REDUCING TEE: This push-to-connect fitting can be used when joining two different-sized pipes quickly and easily.
remove using a disconnect clip or disconnect tongs.
VERSATILE: Pushfit reducing tees work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe.
EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass reducing tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
suitable for underground and behind-the-wall applications with no access panels.
SPECS: Made with DZR forged brass, this reducing tee can withstand 200 degrees F and 200 PSI.
SharkBite 1 Inch x 3/4 Inch MNPT Reducing Adapter, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U142LF
SHARKBITE BRASS PUSH MALE REDUCING ADAPTER: This push-to-connect fitting allows you to make a transition between a pipe and an FNPT thread quickly and easily.
ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**.
VERSATILE: Pushfit male reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
EASY TO INSTALL: The innovative push-to-connect design of the SharkBite push male reducing adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
approved for underground and behind-the-wall applications with no access panels.
SPECS: Made with DZR forged brass, this reducing adapter can withstand 200 degrees F and 200 PSI.
Disconnect Clip Set for Pipe Fitting - Push Fitting Tool for Slip Removal - Disconnect Clip Removal Tool Set - 1/2", 3/4", 1/4", 3/8" and 1" Slip Fitting Removal Tools (Pack of 5)
: This push fitting removal tool does not require any additional materials or equipment for the installation process. Achieve a connection devoid of leakages in mere seconds..
- : This TigerBite plumbing tool can be used for a variety of different pipes. Whether you need to work on copper tubing, PEX fitting or CTS CPVC, this tool will work without any issues..
: The package of plumbing tools you receive includes a 1” disconnect clip, 1/4” disconnect clip, a ¾” disconnect clip, a 3/8” disconnect clip, as well as a ½” disconnect clip and a push-fit installation tip..
: With the help of this lead-free TigerBite plumbing tool set, you can re-use fittings and valves and even rotate the fixtures so that you can reassemble them to install them in tighter places..
: TigerBite fittings are certified up to 93 degrees Celsius and can be used at 200 PSI. They are also certified to ANSI/NSF T61 and ASSE 1061..
SUNGATOR 3/4 Inch Check Valve No Lead Brass Push to Connect Plumbing Fittings to Connect PEX Copper CPVC PE-RT With A Disconnect Clip Pack of 6
【APPROVED TO USE】: Certified and listed to ASSE 1061, NSF/ANSI 61.
Meet UPC, CUPC requirements. Lead Free brass is safe for drinking water and hydronic heating water distribution..
【EASY INSTALLATION】: Complete installs faster and safer than traditional methods with brass push-to-connect fittings and ease of use reduces installation errors as they completely eliminates the need to solder, crimp, glue, thread or fabricate in any forms.
Just push and lock the pipe to get the seamless performance..
【VERSATILE APPLICATIONS】: Whether you are repairing a water line, installing a water heater, remodeling a home or plumbing a system in a new construction job, they are compatible with a range of different end connections, joining any combination of PEX, copper, CPVC pipe..
【LONG LASTING】: Made of high-quality brass that is an abrasion resistant material for use in prevention and protection of fittings against corrosion, scratches, dulling and other damage after use. It is a perfect material for pipe fitting system as it can withstand rated up to 200 °F and 200 PSI and long period of wear and tear..
Cash Acme 3/8 Inch HG135 Thermostatic Mixing Valve with Compression Connections and Integral Checks Brass Plumbing Fitting 25686
CASH ACME THERMOSTATIC MIXING VALVE: This Cash Acme Thermostatic Mixing Valve is a sleek and compact under-sink temperature mixing valve designed to help prevent scalding.
COMPATIBILITY: This mixing valve is compatible with SharkBite copper tubing, CTS, CPVC, SDR-9 HDPE, and PEX fittings.
DURABLE AND HIGH QUALITY: Mixing valves are composed of durable lead-free brass for long-lasting reliability.
EASY TO INSTALL: The innovative design of this thermostatic mixing valve allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
remove using a disconnect clip or disconnect tongs.
SPECS: Outlet temperature range is factory set at 120 degrees F and adjustable anywhere from 85 degrees to 130 degrees F to prevent scalding water temperatures.
Hercules 35235 Haymaker Tankless Water Heater Descaler Kit with Pump and Hoses, 32 oz.
TANKLESS WATER HEATER DESCALER KIT: Includes one 32 oz. bottle of Haymaker solution, two 5' hoses with 3/4" NPT fittings, one 550 GPH electric re-circulation pump with 25' power cord, and one 3.5 gallon pail.
DISSOLVES MINERAL DEPOSITS: Quickly and easily dissolves carbonates, sulfates, phosphates, rust, oxides and other inorganic deposits that restrict flow to restore circulation and heat transfer efficiency.
CITRIC ACID BASED FORMULA: Citric acid based, solvent-free, and VOC-free formula is 3 times as effective on scale as vinegar and has no foul odor.
NON-CORROSIVE AND SEPTIC-SAFE: Compatible with most common plumbing materials including metals, rubber, steel, PVC, CPVC, and ABS, and it is also non-corrosive and safe for septic systems, sewers, and potable water systems.
MAINTAINS OPTIMAL PERFORMANCE: Extends the life of your tankless water heater when used as part of a regularly scheduled preventative maintenance program.
04520 for PPRK5 Plastic Pipe Fitting Reamer 5 Piece Kit fit into standard 1/2\ drills PVC pipe reamer tool Contains PPR125, PPR150, PPR200, PPR300 and PPR400
【Scope of application】：PPR reamer is applicable to exhaust pipe, drain pipe and water pipe, and is used to clean residual pipes and solvent cement residues on PVC, CPVC or ABS fittings, Reduce labor time and materials costs by reusing the fittings..
【Set combination】：Kit with PPR125, PPR150, PPR200, PPR300, PPR400 5 Piece, in ahard plastic case.Fits into standard 1/2 inch drill.Shaft Size: 3/8" hex..
【Advantage】：Its carbide cutting insert provides a cutting edge on each side.Rotate before replacement and receive three bonus cutting edges.Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.NOTE: PPR Fitting Reamers are NOT recommended for use on pressurized systems..
【Professional customization】: Specially designed for North American pipe diameters, So they as they fit specific ID/OD for reaming work.It is made of the latest hard alloy with high strength,high precision, durability and long service life. The surface is not easy to rust after coating treatment..
【100% Satisfaction Guarantee】: Your satisfaction is our top priority, We strive to provide customers with quality services.If you're not 100% satisfied with this tool set, simply return it for a full refund in 30 days. P....
