Best Crane Dc Motor

CHANCS Mini Electric Motor 775 DC 12V/24V With Drill Chuck and PWM DC Motor Speed Controller

  • This is a DIY combination of motor, bracket, B10 drill chuck,and 20A PWM speed controller, it can be used with a saw blade to become a mini saw..
  • 【The specification of motor:】 Rated Voltage: DC 12V, Unloaded Speed: 10000RPM, Load Speed: 8800RPM. Rated Voltage: DC 24V, Unloaded Speed: 20000RPM, Load Speed: 17600RPM. Starting current: 4-5A Motor Body Diameter: 42mm, Motor Body Length: 66.5mm, Shaft Length: 16mm, Shaft Diameter: 5mm..
  • 【The specification of bracket:】 Length: 50mm, Width: 52mm, Height: 53mm, Mounting hole diameter: 4mm, Thickness of bracket: 3mm..
  • 【The specification of the speed controller:】 Input Voltage: DC 10V-DC 60V (Ultra wide working voltage); Output voltage: linear under load; Control Power: 0.01-1200W; Rated Current: 10A; Max Current: 20A (Long-term use of 10A, 450W or less, pay attention to keep the module free of heat dissipation conditions.); PWM Duty Cycle: 0%-100%; PWM Frequency: 25Khz; Product Size(L x W x H): 77*45*28mm;.
  • 【Attention:】 1.About the PWM, please do not connect AC power directly(Such as:110V AC),the input volt of this controller should be DC 9V-60V,otherwise it will be burned out. 2.Make sure the positive and negative connections are correct before powering on the motor speed contro....
Check Stock

ICQUANZX DC6-60V DC PWM Motor Speed Regulator Power Controller with LED Digital Display, Slow Start/Stop Revolving Speed Time Adjustable

  • This is a simple and easy-to-use DC motor speed controller of small size, elegant appearance and stable performance..
  • Designed with a digital display panel for easy reading and convenient setting of speed adjustment..
  • DC Motor Controller can set the time of DC Motor Slow Start and Stop, revolving speed time adjustable, easy to operate,which reduces the mechanical stress on the motor and shaft..
  • Acceleration and deceleration value setting: Each time you press the plus or minus button, the speed changes by 1%, 2%, 5%, 10%, 15%, 20%, 25%..
Check Stock

VIVOHOME 110V 1320 Lbs Lift Electric Hoist, Electric Winch, Garage Ceiling Crane Overhead, Zinc-Plated Steel Wire Hoist for Garage, Warehouses, Factories Lifting with Emergency Stop Switch

  • DURABLE DESIGN - Constructed of a sturdy steel shell and heavy-duty mounting clamps, VIVOHOME Electric Hoist Crane is durable for long-term use.
  • Equipped with a high-strength braided steel cable that adopts an anti-twist design, it can be used frequently every day.
  • EASY OPERATION - Built with an electric motor and a remote panel, this hoist crane allows you to lift load with no manual effort.
  • Compact and lightweight design makes the electric hoist winch convenient to place wherever it is needed.
  • DUAL-LINE OPERATION - Designed with a sheaved pulley lift hook for dual-line operation, which increases stability and load capacity.
  • Specifications: Single line lift: 660 lbs at 33 ft/min, max height: 38 ft.
  • Double line lift: 1320 lbs at 16 ft/min, max height: 19 ft.
  • SAFETY FIRST - Designed with a built-in safety braking structure and overheating protection system to ensure safe operation, it will automatically stop when the power supply is cut off.
  • The motor runs quietly and will not overheat due to its excellent material.
  • A VARIETY OF APPLICATIONS - Perfect for garages, shops, hotels and homes, for both professionals and hobbyists.
  • Good for boat repair, autos, mowers, golf carts, home decorations, engines, boulders, trees, and so on.
Check Stock

ICQUANZX DC Motor Speed Controller, 60A DC10-55V Motor Governor High Power Control Board with Digital Display - 0-100% Adjustable

  • Adjustable speed range is 0%-100%. Suitable for the DC motor (or DC load) within 60A..
  • The input voltage range from DC 10V to 55V, and the rated current 60 amp, so it's really a large power speed controller..
  • Can adjust the motor speed through potentiometers, and support rotation adjustment..
  • Fitted with a display panel which display the rate in percent of actual speed to maximum speed..
  • Apply to: DC brush motor / brush fan / LED.
Check Stock

Erector by Meccano Super Construction 25-in-1 Motorized Building Set, STEM Education Toy for Ages 10 and Up

  • SUPER CONSTRUCTION KIT: This 25-in-1 Building Set features real tools, metal parts & a 6-volt motor to deliver an authentic building experience that can help encourage budding inventors to experiment, think critically, & cultivate engineering skills..
  • LEARN & BUILD: Bring creations to life with real, functional motion. Kids can use the 638 included pieces to construct the primary crane model or create an array of other motorized models, including a helicopter, a buggy crane, & a broadcasting vehicle..
  • GREAT GIFT FOR BOYS AND GIRLS 10 AND UP: Created by the renowned makers of Erector & robot-building sets, this mechanical building kit is a great activity for children & parents to tackle together & makes a great holiday gift. Recommended for kids 10 & up.
  • A NEW GENERATION OF INVENTORS: With a strong legacy behind us, Erector by Meccano is designing S.T.E.A.M. mechanical construction sets for a whole new generation of inventors & innovators who are curious about science, technology, engineering, arts & math.
Check Stock

Motor Controller, DROK PWM DC Motor Speed Controller 10-50V 60A High Power HHO RC Driver PWM Controller Module 12V 24V 48V 3000W Extension Cord with Switch

  • Parameter: DROK DC motor controller operating voltage range is DC 10-50V, max rated current is 60A, control power range is 0.01-3000W, working temperature range of -20℃-40℃..
  • High-end Configuration: Our motor driver control board uses PWM modulation system to adjust light & speed. In addition, it is designed with radiators to doing heat dissipation created by MOS tube..
  • Convenient Speed Control: With wires to connect potentiometer and regulation switch to control the speed, it is convenient to use..
  • Low Quiescent Current: our speed regulation module is designed with low quiescent current 0.04A(When the working voltage is DC10V-50V, the quiescent current cannot exceed 40mA)..
  • Wide Application: our motor driver control board can be applied to universal DC brush motor speed regulation.
  • production line conveyor belt speed regulation.
Check Stock

DaFuRui 3Pcs 1.8v 3v 5v 6v 12v 2A 30W Low Voltage DC Motor Speed Controller PWM 1803BK 1803B Adjustable Driver Switch

  • ★100% brand new and high quality 1803BK DC Motor Speed Controller..
  • ★Allows controlling the direction of a DC the motor using a Pulse-Width-Modulated (PWM) DC voltage..
  • ★With a self-recovery fuse 2A and the product adjust from 0%-100%..
  • ★If the current is too large, it will be automatically disconnected, and the fuse will automatically recover after cooling..
  • ★PWM DC motor speed controller with switch function and a Power-On LED light..
Check Stock

DC31-00054A Washer Drain Pump Water Motor Assembly 85 Watts 110 Volts by Beaquicy - Replacement for Ken-more Samsung Washing machine

  • ✅ 【PRODUCT SPECIFICATIONS】- DC31-00054A Washing machine drain pump motor, includes impeller. Impeller is not available separately. It’s....
  • ✅【PRODUCT INCLUDES】- Includes 1 x DC31-00054A washer drain pump.Washing machine drain pump motor, includes impeller.Impeller is not available....
  • ✅ 【365 DAYS WARRANTY】 - The Drain pump DC31-00054A supports 365 DAYS return and exchange.Risk-free shopping, If you have any quality problem....
  • ✅【HIGH COMPATIBILITY】- Washer drain pump motor DC31-00054A can replacement for Sam-sung,Ken-more and May-tag washing machine.Replaces for....
  • ✅ 【EASY TO INSTALL】 - Unplug the washer before installing DC31-00054A Washer Drain Pump. Wear work gloves to protect your hands. You need a....
Check Stock

Jutagoss 1Pcs Miniature Gear Motor GA12-N20 DC Gear Motor 6V 1000RPM Encoder Speed Velocity Measurement Mini Car Balance Motor

  • 【High Quality】-The gear motor is made of metal gear.
  • Good toughness impact resistance the quality of the bearing and the service life of the gear motor are improved extremely durable.
  • 【Feature】-You can also easily mount a wheel on the motor's output shaft.
  • 【Application】-Great replacement for the rusty or damaged DC geared motor.
  • Widely used in Intelligent remote Control car.
  • 【Package】-1 Pcs GA12-N20 DC Geared Motor with Encoder Test wire.
Check Stock

Hoverboard Morning

  • Motor Speed Controller Brushless Controller with Hall-less.Full SMD process,stable performance,humanized design, interface all adopts terminal blocks..
  • "Voltage 5-50V high power 380W DC three-phase high-speed brushless sensorless controller. ".
  • Standard heat sink,onboard speed regulating potentiometer,you can use it when you have power on..
  • DC three-phase high-speed brushless sensorless controller recognizes PWM signal input, amplitude 3-5V supports PLC0-5V analog quantity, input control.
  • "Size-Length 63MM * width 45MM * height 31MM,Over-temperature protection:yes (half the over-temperature power) Maximum speed:224000 RPM (2 pole motor),74000 RPM (6 pole motor),40000 RPM (12 pole motor), 35000 RPM (14 pole motor).".
Check Stock