Best Crimp Filament

Morris 10817 Terminal Kit with Controlled Cycle Crimp Tool, 200-Piece

  • 200 Piece Terminal Kit with Controlled Cycle Crimp Tool - This Multi Piece Terminal Assortment has all the connectors, terminals and the Crimp Tool you'll need..
  • 22-10 Awg Ergonomic Controlled Cycle Crimp Tool.
  • Multi piece terminal assortment contains ring and spade terminals, butt connectors & male and female disconnects.
  • Terminals and Disconnects are cULus Listed.
Check Stock

Inland Glass PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Transparent Glass Filaments, Yellow Glass

  • GLASS PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • GLASS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 190°C - 210°C (374°F - 410°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND GLASS PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland Glass PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: The Inland Glass PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY GLASS PLA: Glass PLA filament is non-toxic, the mater....
Check Stock

SUNLU ASA Filament 1.75mm UV/Rain/Heat Resistant Tough 3D Printer Filament Great for Printing Outdoor Functional Mechanical Parts 1kg Spool 2.2lbs 395 Meters Red

  • ① 【SUNLU ASA 3D Filament】ASA filament is kind of very strong and tough filament, stronger than PLA filament and ABS filament. No clog, no....
  • ②【Super Neat Filament Spool】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is....
  • ③【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable....
  • ④【Recommend Settings】We recommend printing at a nozzle temperature of 230-260°C(446-500°F), bed temperature of 80-120°C(176-248°F), printing....
  • ⑤【UV/Rain/Heat Resistant】SUNLU ASA 3D printing filament is great for printing outdoor functional mechanical parts, UV/Rain/Heat highly....
Check Stock

Creative Mark Paint Brush Set Mimik Hog Professional Synthetic Hog Bristle Brushes for Acrylics, Inks, Dyes, Gouaches, Watercolors, Easein & Egg Tempera - [Deluxe 20 Piece Set w/Leather Case]

  • ...r brush performance to any synthetic or natural bristle on the planet. These brushes are animal friendly, easy to clean, and provide consistent brush response, time after time..
  • DESIGN: Created with long lasting synthetic bristles retain shape, responsiveness, and integrity over multiple painting sessions! The multi-filament hair design soaks up loads of color while the bristles release both thin and thick paint in controlled strokes. The ferrules are seamless and reinforced with dual-crimp nickel-plated brass and have been electroplated in a stain-resistant black finish. They are beautifully balanced by a long lacquered wood handle..
  • USE: These professional synthetic hog bristle brushes are designed to be used with oils, acrylics, inks, dyes, gouache, watercolor, casein, egg tempera and more! Perfect for artists who are looking for a quality brush with an animal-friendly alternative..
  • CONTENTS: This deluxe 20 piece set comes with a quality leatherette case and contains the following brushes | Round: 1, 2, 4 | Brights: 1, 2, 6 | Filberts 2, 3, 4, 8, 12 | Flats 4, 8, 12 | Extra Thick Filberts 3, 7 | Extra Long Filberts 3, 7 | Fans 2, 6.
  • ITEM: Deluxe 20 Piece Set with Leatherette Case.
Check Stock

Inland PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03mm - 1kg Cardboard Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free Filaments - Black

  • PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: The Inland PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • NEW CARDBOARD SPOOL: PLA filament is non-toxic and comes with a cardboard spool. PLA....
Check Stock

Inland PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03mm - 1kg Cardboard Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free Filaments - Purple

  • PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: The Inland PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • NEW CARDBOARD SPOOL: PLA filament is non-toxic and comes with a cardboard spool. PLA....
Check Stock

IWISS Deutsch Connector Crimping Tool Kit for Deutsch DT Connectors, Solid & Stamped Contacts, Delphi Weather Pack Crimper,Deutsch Pin Removal Tool Kit-12PCS

  • Automotive Harness Wiring Tool Kit: Ideal for pin & depin automotive electrical connectors like Weather Pack connectors, Deutsch Connectors, Molex connectors which are commonly found on cars, RVs, trucks, motorcycles, race cars and boats..
  • Deutsch Crimping Tools: IWD-16, IWD-12 & IWD-20 crimpers are designed for crimping Deutsch solid pins and sockets(Size 16, Size 12 & Size 20) to fit in Deutsch DT, DTP, DTM, HD10, Jiffy Splice connectors..
  • Weather Pack Crimping Tool: Delphi WeatherPack Crimper: IWC-1424B Metri-Pack and Weather Pack crimp tool aids in the assembly process of the Metri-Pack 150 & 280 and Weather Pack connector lines. The crimpers are designed to crimp the terminals and seals found in the Metri-Pack and Weather Pack series..
  • Open Barrel Terminal Crimper: IWC-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Pin Removal Tools: ET-01( DT-RT1) Deutsch wedgelock removal tool and depin tools for WeatherPack terminals, Deutsch DT, DTM, DTP connectors release terminals safely without damaging the vehicle wiring harness or terminal block..
Check Stock

Zhushan Spark Plug Wire Crimping Tool Kit, Ratchet Spark Plug Crimper Diameter 8.5mm for Crimping and Stripping Plug, 24PCS 180 °/90 °/Straight Spark Plug Coil Terminals and 24PCS Terminals Boots

  • 【Spark Plug Crimp Tools】Spark Plug Crimp Tools are made of high quality steel, hardened and durable.
  • crimp spark plug wire terminals and strip 8.5mm spark plug wires, spark plug wire crimp tools are suitable for most types of connections.
  • 【Crimp Tool Kit Includes】1 x spark plug crimping tool ,180, 90 and 180 degree spark plug coil terminals with boots,8 of each type.
  • 【Adjustable Crimping Force】The tool is equipped with a star wheel, built-in thickened ratchet automatically adjusts to the appropriate to ensure proper crimping force. The quick release lever allows the crimping jaws to be opened at any position.
  • 【Spark Plug Coil Terminals】Spark plug coil terminals for 8mm wire. They are made of high-quality brass for good electrical conductivity, and the black rubber boots protect the terminals from dust and moisture.
  • 【Appication】Professional insulated wire terminal ratchet crimping tool can be used for home appliance repair, home circuit repair, car circuit connection, and everything about circuit connection.
Check Stock

Inland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Black

  • ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
  • EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check Stock

Inland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Orange

  • ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
  • EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check Stock