HOME VISE: Net weight 3.31 lbs, Maximum width of jaw opening 2.5 inch, Jaw width 2.0 inch.
EASY TO INSTALL: This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove.
PROTECT TABLE TOP: During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts (To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end).
WIDE RANGE OF USES: This vise can hold a variety of parts，O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work.
TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution..
Double Ended Pin Vise Model Hand Drill Set with 10 pcs Micro Twist Drill Bits Set for PCB Handicraft Jewelry Watch Making
100% brand new and high quality,This pin vise chuck is adopted of brass material, processed by electroplating, beautiful and durable in use Double ended pin vise design,.
Adjustable Pin Vise is the largest and most robust pin vise in our line up of tools.
use it in both commerical and home applications ,Pin vice is useful for electronic assembling, tool-making, model making and hobbies,2 chucks,holding size from 0. 5 mm to 3.2 mm Suitable for PCB, handicraft, jewelry, watch making etc.not suitable for steel, iron stone, stone and other hard objects..
Holds small drills, deburrers, wires, files, reamers and other small tools that can be difficult to hold while working,Hexagonal heads on both sidesCan be used as hand drill.
Drill pin vise has a 3-jaw hardened steel keyless chuck and sturdy plastic handle that is ergonomic and easy to hold ,Compact size is perfect to go in a toolbox or in a pocket.
This product contains a double ended pin vise chuck, and 10 pcs different sizes twist drill bit, convenient for your diy project.
HOME VISE: Net weight 3.62 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
EASY TO INSTALL: This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove.
PROTECT TABLE TOP: During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts (To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end).
WIDE RANGE OF USES: This vise can hold a variety of parts，O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work.
TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution..
Yost Vises LV-4 Homeowner s Vise | 4.5 Inch Jaw Width with a 3 Inch Jaw Opening Home Vise | Secure Grip with Swivel Base | Assembled with a Combination of Powder Coated Cast Iron and Steel | Blue
HOME VISE: Is the perfect tool for your home workshop. Made from heavy duty 65, 000 PSI Ductile Iron castings, 3x stronger than cast iron vises..
TECHNICAL SPECS: Jaw Width: 5" (12.7CM) x Jaw Opening: 5" (12.7CM) x Throat Depth: 4" (10.2CM) x Pipe Capacity: 0.125” D x 3.5"D (0.32CM x 8.9CM)..
SWIVEL BASE: Vise head rotates 360° with respect to the vertical, locking at every 30° or (12) twelve different locking positions and equipped with a large 3.5" x 2.7" (8.9CM X 6.9CM) anvil work surface..
HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and/or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
【High Quality】- Double ended pin vise made of metal materials, durable and practical..
【Hand Pin Vise】- Double Ended Pin Vise made of strongly materials offers superior performance and easy to use..
【Anti-Slip Design】- The uneven design of the arm is more in line with human mechanics.Better for power, no sliding..
【Multipurpose】- Perfect for wood, also for plastic, walnut, amber, beads, beeswax, olive nut, small model kit etc..
【Not Only A Drill Tool】 - Pin vise able to clamp steel line and twist it into the shape you need, and also useful for electronic assembling, tool-making, model making and DIY..
Double Ended Pin Vise DIY Hand Drill Pin Vise Resin Drill Wire Twisting Tools with Copper Collet Copper Drill Jewelry Making Tools for DIY Hairpin Keychain Bracelets Necklace (2 Pieces)
What you will receive: you will get 2 pieces of double ended pin vises, besides, there are 2 pieces of copper collets of each pin vise, sufficient enough to meet your crafting demands in daily life.
Reliable workmanship: these DIY hand drills are made of quality alloy, compact and sturdy, nor easy to deform, these collets insides are made of copper, neatly cut with cross shape, which can serve you for a long time.
Double ended design: these pin vise resin drills and copper collets are designed with double ends, besides, these resin drills are carved with helix texture inside, which can provide you with an efficient and labor saving using experience.
Appropriate size: these copper drill chucks are approx. 1.38 inches in length, which can also be applied to screwdrivers, these wire twisting tools are approx. 3.94 x 0.36 inch, moreover, they are designed with uneven surfaces, making it comfortable for you to grip, not easy to slip.
Hands on DIY pleasure: with these jewelry making tools, you can make many beautiful handiwork, such as beautiful antique hairpins, bracelets, necklaces, keychain, clay figures, hanging ornaments and more, which can bring you lots of DIY pleasure and a sense of achievement.
Double Ended Pin Vise DIY Hand Drill Pin Vise Resin Drill Wire Twisting Tools with Copper Collet Copper Drill Jewelry Making Tools for DIY Hairpin Keychain Bracelets Necklace (4 Pieces)
What you will receive: you will get 4 pieces of double ended pin vises, besides, there are 2 pieces of copper collets of each pin vise, sufficient enough to meet your crafting demands in daily life.
Reliable workmanship: these mini hand drills are made of quality alloy, compact and sturdy, nor easy to deform, these collets insides are made of copper, neatly cut with cross shape, which can serve you for a long time.
Double ended design: these pin vise resin drills and copper collets are designed with double ends, besides, these resin drills are carved with helix texture inside, which can provide you with an efficient and labor-saving using experience.
Appropriate size: these copper drill chucks are approx. 1.38 inch in length, which can also be applied to screwdrivers, these wire twisting tools are approx. 3.94 x 0.36 inch, moreover, they are designed with uneven surfaces, making it comfortable for you to grip, not easy to slip.
Hands-on DIY pleasure: with these jewelry making tools, you can make many beautiful handiwork, such as beautiful antique hairpins, bracelets, necklaces, keychain, clay figures, hanging ornaments and more, which can bring you lots of DIY pleasure and a sense of achievement.
Powerful 15 AMP direct drive motor for improved performance.
Miter cuts 0°-45° left and 0°-52° right.
Positive miter stops at 9 settings: 15°, 22.5°, 30°, 45°, right or left and 0° (90° cuts).
Features powerful 15 amp motor and dual post compound pivoting arm.
Provides a large capability with cuts 52 degrees right and 47 degrees left with 9 positive stops at 15, 22-1/2, 30, 45 degrees left or right and 0 degrees.
Durably designed with a machined aluminum base, dual aluminum base, dual slide rails and a carbide tip blade.
Saw includes vertical vise, blade, wrench and triangular rule.
