Best Current Ransformer

HFBTE Large Caliber AC Leakage Current Meter Tester Digital Clamp Meter 0.00mA~2000A Measurement Range with RS232 Interface Data Storage Function

  • ❤❤(1)ETCR7000 Large Caliber Leakage Clamp Meter is specially designed and manufactured for measuring ac leakage current and current,Range: 0.00mA~2000A..
  • ❤❤(2)Large diameter 80mm × 80mm, can clamp 96mm cable or flat steel ground wire..
  • ❤❤(3)Adopting the latest CT digital integration technology and magnetic shielding technology, it is almost immune to external magnetic fields and has strong anti-interference ability, ensuring high precision, high stability and high reliability of measurement..
  • ❤❤(4)Especially suitable for cable leakage current and transformer grounding flat steel leakage current detection.) Automatic, can test one channel leakage current (current), convenient and fast..
  • ❤❤(5)The meter with the RS232 interface, can storage data 99 groups, systme software can upload storage data to computer, realize online real-time monitoring and historical query, dynamic display, with historical data reading, saving, printing and other functions..
Check Stock

MASTECH MS2108A AC/DC Clamp Meter Multimeter Voltmeter Resistance Ohm 4000 counts

  • Perform measurements of inrush current, AC / DC voltage and current, resistance, frequency, duty cycle, capacitance, continuity and diode test..
Check Stock

Hantek DSO2D10 2 CH Oscilloscope with Built-in DDS Generator, 100MHz 1GSa/s

  • ⚡【AC/DC amp clamp meter】 Hantek AC/DC Current amp Clamp probe with bnc for oscilloscope, 400Hz Bandwidth, 1mV/10mA, 650A..
  • ⚡【Multifunction】It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms..
  • ⚡【BNC Probe】if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms..
  • ⚡【Application】1.Power circuit measurement and malfunction analysis.
  • 2.Motor drive of frequency converter (or other electronics) measurement.
  • 3.Power electronics equipments measurement..
  • ⚡【What you will get】1*AC/DC Current clamp CC-650,1*English Manual..
Check Stock

FITINOCH Flat Top Li-Ion18650 Battery Charger,2500mAh 30A Dischage Current Rechargeable High Drain 3.7v Batteries 2 Pack(US Shipping)

  • ✅【REAL 30A DISCHARGE CURRENT】Real 30A discharge current as original sms 25r battery..
  • ✅【REAL 2500mAh CAPACITY】Real 2500mAh capacity high drain as original sms 25r battery..
  • ✅【APPLICATION FOR COMMON AND HIGH CURRENT ELECTRONIC DEVICES】Not only for common current electronic devives but also Compatible with various high-current ones.
  • ✅【FAST U.S. SHIPPING】Fast ship from US warehouse. Response within 24 hours..
  • ✅【DIMENSION】Flat top 65*18*18 mm(please confirm the size before purchasing).
Check Stock

BAV99E-6359 - Diode 3-Leads SOT-23 BAV99 (100 Piece Lot)

  • 20 Pcs 15SQ045 / Forward Current : 15 A / Maxixum Repetitive Peak Reverse Voltage : 45 V.
  • Maximum Average Forward Current: 15 A MP.Forward Current (at DC10A): 0.55V..
  • All products are tested for stability, consistency and reliability. Ensure product excellence..
Check Stock

KAIWEETS HT208D Inrush Clamp Meter 1000A True RMS AC/DC Current Amp Meter VFD LOZ Mode 6000 Counts Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle

  • True-RMS Clamp Meter: This multimeter can accurately measure 1000 Amp AC/DC Current, 1000V AC/DC Voltage, Frequency, Duty Cycle, Resistance, Capacitance, Diode, Continuity, and Temperature. Easy to use for labs factories and households..
  • Inrush Current Meter: Knowing the value of inrush current can help you locate a startup problem quickly, whether it's in the motor or in the starting circuit. The measuring time of the inrush current is about 100ms. When the current is greater than 10A, the Inrush function works well. The inrush function is only available in AC current mode, DC current does not have the inrush function..
  • NCV Detection & LED Flashlight: Built-in Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage. A convenient LED flashlight illuminates a dimly lit area..
  • Advanced Functions: The Clamp Meter has Variable Frequency Drive Filtering (VFD) and low Input Impedance (LoZ) modes, which can provide higher accuracy readings..
  • Safety Service: Safety standard IEC 61010-1, CAT IV 600V, CAT III 1000V. Double insulation. Use high-quality material, to prevent electric shock harm. 36-Month product service provided. 7/24 Customer Service..
Check Stock

Fluke 715 Volt/mA Loop Calibrator

  • Measure Loop Current (0-20 Ma, 4-20 Ma) Signals With Very High Accuracy Of 0. 015% And 1 Ma Resolution.
  • Measure Voltage Output Process Signals From Places, Transmitters.
  • 24V Loop Supply With Simultaneous Current Measurement.
  • Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015-Percent and 1 mA resolution.
  • Compatible with toolpack magnetic hanging system.
Check Stock

Amass 10 Pair XT90 Male Female Bullet Connectors Power Plugs for RC Lipo Battery Motor … …

  • XT90 connector with high temperature resistant material,Genuine Amass Connector.
  • Amass XT90 bullet connector provides solid and reliable connection,reusable connector end design for times insert and take off from the Enclosure.With high current indurance performance ,it could be used many times, reach to 1000 times..
  • Resistance to current 90 A (Continuous), 120 A (Peak), suitable for needs Plugs and 90-120A current application of occasion. For example, 250 Helicopters, current car Small Boat Molds..
  • XT90 adopts the 4.5mm banana plug, upgrade version - Light weight, small size, high current indurance performance.
  • Solid high-amp connection,perfect for RC lipo battery.Often used in remote control aircraft and Rc models, RC Charger and so on..
Check Stock

Fluke 374 FC 600A AC/DC TRMS Wireless Clamp Meter

  • Connect your meter to your smartphone with fluke connect measurements.
  • Read measurements on your phone at a safe distance, wearing less ppe while your meter takes all the risks.
  • Record results directly to your phone and the cloud.
  • 600 A AC and DC current measurement and 2500 A AC current measurement with (optional) iflex flexible current probe.
  • True RMS voltage and current for accurate measurements on non linear signals.
Check Stock

DC Buck Converter, DROK DC to DC Step Down Power Supply Module 10V-65V to 0-60V 0-12A Adjustable Voltage Regulator Transformer Board with LED Display for Volt Reducer

  • 【Adjustable Output Voltage and Current】For DROK buck converter: Input voltage range is DC 10-65V.
  • Output voltage range is DC 0-60V, can be arbitrary adjustable and used to convert 24v to 12v 5v.
  • Output current range is 0-12A, can be arbitrary adjustable.
  • 【LED Display】This power supply module is designed with LED display, which can show real-time voltage, current, capacity and time..
  • 【Constant Current and Voltage with Indicator Lights】This volt transformer board can set constant output voltage and constant output current by the key buttons. Also, the module is equipped with working status indicator lights, which are output OUT, constant voltage CV and constant current CC respectively, so that the working status can be checked in real time..
  • 【Auto Output and Button Lock Mode】Automatic output can be set after power on. And The parameter adjustment button can be locked to prevent misoperation to adjust the output voltage and current parameters..
  • 【Cooling fan and cooling pad】This adjustable power supply converter is equipped with cooling fa....
Check Stock