Best Current Tranformer

LiitoKala Lii-500 4 Slots Smart Intelligent Battery Charger for 3.7V Li-ion/ 1.2V Ni-MH Cylindrical Rechargeable Battery LCD Display

  • 【Suitable size】Be suitable for 3.7V Li-ion & 1.2V Ni-MH cylindrical rechargeable battery of size between: (diameter: 0-22mm, height: 34-70mm).   .
  • 【Different current】Capable of charging 4 batteries of different size and with different capacity simultaneously.Each of the four battery slots monitors and charges independently.4 optional charging current: 300mA / 500mA / 700mA / 1000mA..
  • 【Current protection】LCD displays charging current, voltage, capacity, impedance and charging time.Features over current protection, over charge protection, short circuit protection, and battery polarity reverse connection protection..
  • 【Output current】Charger, fast test and normal test modes, test modes test the maximum capacity of the batteries. USB output can charge your 5V electronic devices (such as phones) when putting the Li-ion batteries in the slots.  Automatically stops charging when complete..
Check Stock

Performance Teknique ICBM-892 2 Channel Amplifier 1200W MAX

  • Power – 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms.
  • Full Range – With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers.
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal.
  • Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry.
  • Variable Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier.
Check Stock

CR Magnetics CR4411-5 Average RMS AC Current Transducer with Single Element, 20 Hz - 4 KHz, 003e= 2K Output Load, 24 VDC +/-10%, 0-5 AAC Input Range, 0 - 10 VDC Output Range

  • CURRENT MONITORING --- Mutual inductance current monitoring has high current detection accuracy and safe isolation of input and output..
  • STRAIGHT-THROUGH DESIGN --- Straight-through structure design, isolation withstand voltage up to 2000V. Straight-through wire diameter: 0.35-20mm..
  • MEASURE CURRENT RANGE --- Self-powered, no external power supply required. Measured current AC 0-100/150/200A, output signal DC 0-10V..
  • WIDE APPLICATION --- Suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system and so on..
  • ABS OUTER CASTING --- Hysteresis is less than 1% and can be used under strong magnetic conditions. The outer casing is made of self-extinguishing material ABS..
Check Stock

Current Transmitter Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A

  • Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output..
  • The measured current of this current transmitter is AC 0-10A/20A/50A.
  • The output signal of this current transducer is DC: 0‑5V/0‑10V/4‑20mA 3 forms are optional..
  • With strong overload capacity, high accuracy, high isolation, high safety, low power consumption.
  • through‑core structure design, isolation withstand voltage up to 2000VAC.
  • hysteresis less than 1%, can be used under strong magnetic field conditions..
  • The shell is made of self-extinguishing material ABS.
  • it is easy to install and use, and there is no need to connect DC in series in the circuit when measuring..
Check Stock

DROK Voltage Boost Converter, DC 6-30V 5V Step Up to DC 7-32V 12V 24V 5A Adjustable Volt Regulator, LCD Power Supply Module Voltage Current Amp Display Transformer Circuit Board with Case

  • Output voltage: DC 7-32V continuously adjustable (the output voltage must be at least 1.5V higher than the input voltage).
  • Output current: 5A (max), adjustable, recommended to use within 4A.
  • Output power: 60W (max), recommended to use within 50W..
  • Clear LCD Display --- The boost board is designed with a large clear digital LCD display on which shows both voltage and current value simultaneously. Which is easy to read and can help the user easily monitor the output voltage, then largely enjoy their DIY work..
  • General Application --- This voltage step up converter can be used as ordinary step-up module with over-current protection, constant current LED driver module.
  • Features --- Constant current/voltage mode.
  • Input reverse connection protection. You can find the PDF Instructions on this page -- Product information -- Product guides and documents -- User Manual [PDF]..
  • NOTE --- 1). Constant current adjustable means that CC mode only works when the actual load output current is greater than the setting one, otherwise it will work in a constant voltage state, not the current is adj....
Check Stock

HFBTE Large Caliber AC Leakage Current Meter Tester Digital Clamp Meter 0.00mA~2000A Measurement Range with RS232 Interface Data Storage Function

  • ❤❤(1)ETCR7000 Large Caliber Leakage Clamp Meter is specially designed and manufactured for measuring ac leakage current and current,Range: 0.00mA~2000A..
  • ❤❤(2)Large diameter 80mm × 80mm, can clamp 96mm cable or flat steel ground wire..
  • ❤❤(3)Adopting the latest CT digital integration technology and magnetic shielding technology, it is almost immune to external magnetic fields and has strong anti-interference ability, ensuring high precision, high stability and high reliability of measurement..
  • ❤❤(4)Especially suitable for cable leakage current and transformer grounding flat steel leakage current detection.) Automatic, can test one channel leakage current (current), convenient and fast..
  • ❤❤(5)The meter with the RS232 interface, can storage data 99 groups, systme software can upload storage data to computer, realize online real-time monitoring and historical query, dynamic display, with historical data reading, saving, printing and other functions..
Check Stock

MASTECH MS2108A AC/DC Clamp Meter Multimeter Voltmeter Resistance Ohm 4000 counts

  • Perform measurements of inrush current, AC / DC voltage and current, resistance, frequency, duty cycle, capacitance, continuity and diode test..
Check Stock

Hantek DSO2D10 2 CH Oscilloscope with Built-in DDS Generator, 100MHz 1GSa/s

  • ⚡【AC/DC amp clamp meter】 Hantek AC/DC Current amp Clamp probe with bnc for oscilloscope, 400Hz Bandwidth, 1mV/10mA, 650A..
  • ⚡【Multifunction】It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms..
  • ⚡【BNC Probe】if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms..
  • ⚡【Application】1.Power circuit measurement and malfunction analysis.
  • 2.Motor drive of frequency converter (or other electronics) measurement.
  • 3.Power electronics equipments measurement..
  • ⚡【What you will get】1*AC/DC Current clamp CC-650,1*English Manual..
Check Stock

FITINOCH Flat Top Li-Ion18650 Battery Charger,2500mAh 30A Dischage Current Rechargeable High Drain 3.7v Batteries 2 Pack(US Shipping)

  • ✅【REAL 30A DISCHARGE CURRENT】Real 30A discharge current as original sms 25r battery..
  • ✅【REAL 2500mAh CAPACITY】Real 2500mAh capacity high drain as original sms 25r battery..
  • ✅【APPLICATION FOR COMMON AND HIGH CURRENT ELECTRONIC DEVICES】Not only for common current electronic devives but also Compatible with various high-current ones.
  • ✅【FAST U.S. SHIPPING】Fast ship from US warehouse. Response within 24 hours..
  • ✅【DIMENSION】Flat top 65*18*18 mm(please confirm the size before purchasing).
Check Stock

BAV99E-6359 - Diode 3-Leads SOT-23 BAV99 (100 Piece Lot)

  • 20 Pcs 15SQ045 / Forward Current : 15 A / Maxixum Repetitive Peak Reverse Voltage : 45 V.
  • Maximum Average Forward Current: 15 A MP.Forward Current (at DC10A): 0.55V..
  • All products are tested for stability, consistency and reliability. Ensure product excellence..
Check Stock