Best Cutting Depth Guide

JET JWBS-14CS, 14-Inch Woodworking Bandsaw, 1HP, 1Ph 115/230V (708115K)

6" DEPTH RESAW CAPACITY: For cutting larger pieces of wood..
15"X15" CAST IRON TABLE: Gives you more work area in front of the blade..
CAST IRON FRAME AND TABLE: Minimizes cutting vibration, and enhances work stability and safety..
EASY ADJUSTMENTS: Micro-adjustable lower blade guide reduces set-up time..
COOLER BLADES: Graphite-impregnated polymer blade guides with roller bearing thrust guides..

Powerful 8-amp motor provides up to 32,000 cuts per minute.
Spacious 4-3/8-Inch cutting capacity perfect for planing 2x4s and 4x4s.
16 positive stops adjust the cutting depth anywhere from 0 to 1/8 inches.
Two-way dust port shoots loose shavings to either the left or right depending on user preference.Rabetting:1/3 inch.
Includes a dust adapter, two fully reversible HSS planer blades, two V-shaped chamfer grooves, a parallel fence bracket, a rabbeting guide, an automatic kickstand, and a two-year warranty.

All-purpose guide-point bits trace around outlet boxes and can lights for fast and accurate drywall cut outs.
Diameter/Collet Size: 1/8" - Cut depth: 3/4".
50-Pack - Buy in multiples and save. Keep plenty of extras on hand.
Won't damage receptacle boxes - Guide point is rounded to follow the outline without cutting through the box or can light.

6-inch jamb saw with 5-4/5-amp, 900-watt industrial grade motor featuring ball and needle bearings.
Patented design cuts full inside corners in molding up to 1/2-Inch thick, undercut doors up to 1-3/4-inch.
Adjustable cutting depth guide prevents cutting into plaster or wall board when trimming base boards.
Precision height adjustment from flush to 1-1/16-inch, spiral ground gears for smooth, quiet operation.
Includes custom molded carrying case, 6-3/16-inch carbide-tipped blade, 1-year product warranty.

All-purpose guide-point bits trace around outlet boxes and can lights for fast and accurate drywall cut outs.
Won't damage receptacle boxes - Guide point is rounded to follow the outline without cutting through the box or can light.
16-Pack (2 boxes of 8 bits each) Buy in multiples and save..
Diameter/Collet Size: 1/8" - Cut depth: 3/4".

3-1/4" Handheld Planer with 5.5 amp motor.
MOTOR: 5.5 amp motor offering an impressive no-load speed up to 17,000 RPM for clean efficient cuts.
LIGHTWEIGHT: At only 6.1 lbs for increased maneuverability and ease of use.
INCLUDES: Carrying case, box wrench, dust bag and guide.
BLADES: Re-sharpenable blades allow for extended use.
DUST COLLECTION: Either use the included dust bag or vacuum attachment.
KICKSTAND: Built-in kickstand prevents damage to the work surface when not in operation.

Powerful Motor. A motor of 5.8 Amps delivers full-size performance at 3,500 RPM to cut multiple materials in a single pass..
Bevel Lever and Depth Guide. The bevel lever allows straight cuts and to change cutting angle up to 45 degrees, while the cutting depth is 1-11/16" (at 90°) and 1-1/8" (at 45°)..
Accurate, Clean and Safe. With thickened aluminum base and scale ruler, cut straight and accurate at ease. No worries for the debris if you connect the dust port vacuum adapter. The guards below the blade greatly improve the safety of use..
Ergonomic Design. It is compact in structure, small in size and light in weight. Optimized ergonomic slim grip provides easy to one-handed operation and less fatigue..
What You Get. 1* Mini Circular Saw, 1* 4-1/2" 24T TCT Blade, 1* Hex Key, 1* Scale Ruler, 1* Dust Port Vacuum Adapter, 1* User Manual..

The 15A optimised gearbox and blade system increases motor and blade life to cut through a variety of materials including steel, aluminium, wood, even wood with embedded nails and plastic, all with just one blade that comes included with this table saw..
Rip cutting, assisted by an adjustable, full-length, parallel fence with measuring rail guide ensures reliable smooth square cutting every time. Set the blade to the desired angle up to 45 degrees bevel tilt and up to 60 degrees miter which covers all common cutting angles..
Raise and lower the blade height for trench cuts with this folding table saw. Achieve 3-1/4 in. depth of cut at 90° and 2-1/4 in. depth of cut at 45° bevel..
The included 28T Japanese TCT saw blade (tungsten carbide tipped blade) allows the table saw to cut effortlessly through steel, aluminium, wood with embedded nails, plastic and more.
For added safety, the included push stick offers safer operation when handling off cuts and the huge saw table features left and right table extensions to support wide work-pieces with a table surface area of 47-1/4 x 25-3/16 inch..
The all in one Rage 5-S table saw offers a collapsible frame with wheels for easy storage and portability meaning there is no need for use of a miter saw stand..

[POWER LIKE THE PROS] The 12 Amp motor spins the 7.5” blade fast and deep at 4700 revolutions per minute, giving you professional-looking lines and edges.
[3 DEPTH ADJUSTMENTS] Cut down at 1”, 1-1/4”, 1-1/2” depending on the task at hand.
[CUTTING LINE INDICATOR] Stay on the straight and narrow with the cutting line guide—you’ll notice a difference when you’re done.
[ADJUSTABLE SHAFT] Users of any height can find a length and comfortable position that works for them with the adjustable shaft and D-grip handle.
[DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last.

Ball-Bearing Blade Guides - Upper and lower ball-bearing blade guides and thrust bearings reduce friction, increase blade life and contribute to the smooth operation of the machine during cuts.
Rack and Pinion Guide Post – Adjust the cutting depth easily with the turn of a knob. New inch scale helps set guide heights.
Extra Tall Rip Fence – Increased fence and re-saw bar heights of 6" give added support of lumber being ripped or re-sawn.
Rear 115V Power Outlet – Handy electrical outlet for plugging in lights, radios, phone chargers and more.
Takes 111” Blades – Band saw accepts all styles of 111” long blades from 3/16” to 3/4” in width.