ABN Aluminum Oxide Sandpaper Disc, 50pk - 2in 36 Grit Sanding Disc Set, Circle Sander Pads Abrasive Round Sandpaper
[Get More Cutting Power]: Use the ABN 50pk Aluminum Oxide 2in Round Sandpaper Discs 36 Grit to prep, finish, and polish various materials.
High-speed sanding grinds particles and removes target coating and scratches to leave you with a smooth, uniformed surface.
[For Your Work]: Use sanding discs to clean and deburr or to blend, finish, and polish.
Circle sander sandpaper will help you remove paint, rust, glue, or other stubborn adhesives and materials such as ferrous and non-ferrous metals, painted surfaces, and other building materials.
[Built to Last]: Aluminum oxide abrasive sanding discs are known for their low heat retention, high cut rate, and durability for preparing and finishing material for your workplace and garage.
Aluminum oxide material is bonded with resin to resist overload.
[Fits Your Tools]: Each disk sander paper has a R-type torque screwed attachment that connects to your mandrel bit shaft (not included).
Use round sand paper discs for right angle sanders, air sander drills, electric drills, or other sanding rotary tools.
[Package Contents]: Each package include (50) 2-inch (5cm) disc sanding pads with r-lock base attachments.
Aluminum oxide round sand paper have a 36-grit abrasion for heavy cutting and stripping, such as paint remov....
OEMTOOLS 26528 10 Piece Cut Off Wheel Set with Mandrel, Cutoff Wheel Mandrel Set, Premium Metal Cutting Wheels w/ 3/8" Arbors, Die Grinder Cut Off Wheel
Superior Cutting: Get the best means for cutting fiberglass, plastic, steel, and other ferrous metals with our angle grinder cut off tool.
The flathead notch on the mandrel adaptor makes fitting the air tool arbor cutting wheels into tight spaces easy.
Compatible Discs: Our cutting discs are great for use on die grinders, air cut off tools, and angle grinders.
Get clean burr-free cuts every time with our 3 inch cut off wheel.
Excellent Maintenance Tools: Cut through the metallic fluid or oil lines of your vehicles with ease using our air cutting wheel.
Stuck bearings, bolts, screws, and more are removable with the premium metal of our 1/32” thick cut off wheels.
Durable Materials: Get strength from our cutting wheels for metal.
These cutting discs are 1/32” thick for long term use and made of premium metals that work at a max RPM of 20,400.
Product Specifications: 10 piece 46 Grit 3” x 1/32” cut off wheels.
Cutting discs feature 3/8” arbor holes.
Mandrel designed to fit 0.625 to 1/32” thick cut off wheels.
Cuts fiberglass, plastic, iron, steel, and other ferrous metals.
ALATIN 5/8 Inch Wood Carving Chain Disc 4 Inch 22 Teeth Saw Blade Grinder Wood Carving Disc for 4 Inch/ 4-1/2 Inch Angle Grinder Grinding Shaping Attachment Circular Chainsaw Wheel
... disc has been enlarged to fit widely used 1.61" black flange nut. So all the parts work right out of the box..
[Fit 4" or 4 1/2" angle grinders with 5/8" Arbor] The angle grinder attachments set includes 1 piece of 22-tooth chain saw disc (4" dia × 5/8" bore), 1 piece of replacement chain, 1 piece of 12 teeth wood cutting disc (3.55" dia × 5/8" bore), 1 piece of wood grinding wheel w/ silver bushing(3.31" dia ×5/8" bore). Designed to be used in all standard 4" or 4 1/2" angle grinders with 5/8" as well as M10 arbor, such as Makita, Bosch, Dewalt, Black & Decker, Milwaukee, Hitachhi & more..
[Cope with Different Occasions] The wear-resistant chain disc consists of stainless steel plate and 22-teeth chainsaw of hard alloy steel. If your chain plate gets dull, you can quickly replace the chain with the extra circlet. Hundreds of aggressive teeth of the wood grinder wheel can remove paint residue and rotted wood to smooth the surface of old furnitures. The carbon steel cutting wheel can be used to provide shallow cuts for fine shaping, planing and sculpting..
[Practical Tool Set] With rapid cutting and grinding speed, the wood grinding wheel is great for non-metallic materials, suitable for soft and hard wood, chipboard, laminate even plastic. Ideal for....
Pomsare Upgraded 4PCS Wood Grinding Wheel for 4" or 4 1/2" Angle Grinder, Grinder Wheel Shaping Disc w/Chain Attachment, Wood Carving Disc Tool for Cutting Sanding Polishing
... disc has been enlarged to fit widely used 1.61" black flange nut. So all the parts work right out of the box..
[Fit 4" or 4 1/2" angle grinders with 5/8" Arbor] The angle grinder attachments set includes 1 piece of 22-tooth chain saw disc (4" dia × 5/8" bore), 1 piece of replacement chain, 1 piece of 12 teeth wood cutting disc (3.55" dia × 5/8" bore), 1 piece of wood grinding wheel w/ silver bushing(3.31" dia ×5/8" bore). Designed to be used in all standard 4" or 4 1/2" angle grinders with 5/8" as well as M10 arbor, such as Makita, Bosch, Dewalt, Black & Decker, Milwaukee, Hitachhi & more..
[Cope with Different Occasions] The wear-resistant chain disc consists of stainless steel plate and 22-teeth chainsaw of hard alloy steel. If your chain plate gets dull, you can quickly replace the chain with the extra circlet. Hundreds of aggressive teeth of the wood grinder wheel can remove paint residue and rotted wood to smooth the surface of old furnitures. The carbon steel cutting wheel can be used to provide shallow cuts for fine shaping, planing and sculpting..
[Practical Tool Set] With rapid cutting and grinding speed, the wood grinding wheel is great for non-metallic materials, suitable for soft and hard wood, chipboard, laminate even plastic. Ideal for....
One-size fits all Snap-Lock mandrel fits all Diablo hole saws from 5/8-inch to 6-inches in diameter..
Snap-Lock mandrel system for a quick and easy change with no down time..
60mm (2-3/8 in) cutting depth for deeper holes in one pass and increased productivity..
These radical new hole saws provide ultimate cutting length to bore deeper holes in a single pass, tool-free plug ejection and Variable Tooth Design for faster cuts..
Steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal Note: Cannot be used for concrete, tiles and stone..
EZARC Bi-Metal Hole Saw Kit, 7-Piece Hole Saws Set Cobalt Drill Hole Cutter with Mandrels for Sheet Metal, Wood, Drywall, Aluminum, Plastic Plate, Plasterboard
【Long-lasting & Durability】Professional high speed steel M42 (not M2) with 8% cobalt ensures more heat resistance of the teeth, This hole saw provides more than 50% longer lifetime on drilling various materials such as metal, hard wood, plastic and plasterboard..
【Efficient Plug Remove】Our metal hole saw kit with 3X sideling slot design can effectively remove plugs and increase operating speed..
【Fast & Clean Cutting】The 4/6 variable teeth configuration allow hole saw kit for metal and wood to provide clean and fast cutting in the most demanding applications..
【Hex Shank Arbor with Adapter】EZARC hex shank arbor with an extra adapter can fit all size metal hole saws from small to large diameters. The pilot drill bit is made of premium high-speed steel for precise positioning and rapid drilling for longer service life..
【Complete Hole Saw Set】5pcs M42 Bi-metal hole saw: 7/8’’ (22mm), 1’’ (25mm), 1-1/8’’ (29mm), 1-1/4’’ (32mm), 1-1/2’’ (38mm) to meet needs of different situations. 1 x Mandrel with Adapter and 1 x Plastic Case for easy storage. The maximum cutting depth is 1-7/8" (48mm)..
Gyros Stainless Steel Mandrel, 1/8" Shank, Fits 1/4" Arbor Hole Size Strong and Vibration-Free. Used to Mount Accessories like Miniature Circular Saw Blades, Cut-Off Wheels, etc. onto Rotary Hand Tools.80-18105
High-Quality Stainless Steel --- this Gyros Professional Mandrel is made of high-quality stainless steel which is resistant to corrosion and staining, which increases mechanical strength Making it practically strong and durable..
Essential and Sturdy Accessory --- Compatible with most rotary tools, this mandrel provides a supportive and sturdy mounting base for sanding, buffing, or cut-off wheels and discs, saw blades, cutting blades, and mini rubber grinding wheels..
1 Mandrel and 2 Washers Included --- Package Includes 4 Pieces - 1 mandrel shank 1 screw head and 2 washers. Fits a ¼” center hole, with a ⅛” straight shank that is compatible with most power rotary tools like the Gyros PowerPro Rotary Tools..
Wide range of Uses --- This is the ideal wheel mandrel for use with rotary tool attachments and accessories, Gyros is the preferred brand by many polishers, metal workers, jewelers, hobbyists, craftsmen, and professionals..
Proudly made in the USA, for your safety, Make sure that Mandrel is seated correctly with the rotary tool and tightened before use, and always use Gyros Mandrel with proper protective clothing, safety glasses, or face shield..
OKDIAMOND Mini Circular Saw Blade HSS High-Speed Steel Cut Off Wheel for Dremel Fordom Cutting Rotary Tools Wheel Set for Wood, Plastic, Soft Metal, 6Pcs Set with 1/8\ Spindle
【VERSATILE USE】: suitable for cutting soft metals such as wood, gypsum board, plastic, PVC, aluminum and copper.
【INCLUDES】: The rotary cutting wheels tool kit includes 5pcs HSS cutting saw blade discs(7/8"、1"、1-1/4" 、 1-1/2"、1-3/4") match with 1pcs 1/8'' shank mandrel.
【PREMIUM MATERIA】: Made of strong HSS (High Speed Steel), hard texture, long life, durable, fast cutting，The Maximum RPM of mini Circular Saw Blade Set is 20000.
【EASY TO INSTALL】: These cutting wheel set for rotary tool are easy to install and replace. These rotary tool accessories are suitable for DIY projects and the home hobbyist and also great gifts for those who are working on wood, metal ,DIY craft..
【NOTICE】For your safety, please must wear gloves and goggles and be care around spark when using rotary tool accessories. Please according to operation tips..
