Best Cv Axle Cv Boot

CV Joint Boot Clamp Pliers , Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars with 3 Pair Clamps

◇ CV Boot Clamp Pliers : Use with any banding up to 2/5-inch (10mm) in width.
Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses.
Plier works on steering gear gaiters and fuel hoses on various brands of cars.
Can be used for working on Oetiker System hose clamps.
◇ High-quality : The CV Joint Banding Tool is made of quality stainless steel throughout, which is durable, corrosion resistant, oil resistant, high temperature resistant, and long lasting. The plier head is hardened and treated for higher hardness.
◇ How to Use : Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and cut.
To complete clamping, fold down remaining band tail band into clip and secure by tapping down clip ears clip.
We recommend double-wrapped band for added strength.
◇ CV Joint Boot Clamp Plier : Includes 3 X small clamps and 3 X large clamps. Made of stainless steel, they are very tough and can lock items very firmly. The locking teeth stop the tie at the....

the all balls cv boot material is compounded from an oem grade dcr66 rubber that is formulated specifically for the demanding requirements of today's....
50% more abrasion resistant than conventional cv boot material to assure long life in today's harsh off-road environments.
rubber compound is tested to -40 degrees f to assure good performance & long life at low temperatures.
kits include two stainless steel clamps that are designed to be tightened without the use of special tools.
lithium based molybdenum grease insures good lubrication for long cv joint life.

The All Balls CV Boot material is compounded from an OEM grade DCR66 rubber that is formulated specifically for the demanding requirements of today's....
50% More abrasion resistant than conventional CV boot material to assure long life in today's harsh off-road environments.
Rubber compound is tested to -40 degrees F to assure good performance & long life at low temperatures.
Kits include two stainless steel clamps that are designed to be tightened without the use of special tools.
Lithium based Molybdenum grease insures good lubrication for long CV joint life.

The All Balls CV Boot material is compounded from an OEM grade DCR66 rubber that is formulated specifically for the demanding requirements of today's....
50% More abrasion resistant than conventional CV boot material to assure long life in today's harsh off-road environments.
Rubber compound is tested to -40 degrees F to assure good performance & long life at low temperatures.
Kits include two stainless steel clamps that are designed to be tightened without the use of special tools.
Lithium based Molybdenum grease insures good lubrication for long CV joint life.

The All Balls CV Boot material is compounded from an OEM grade DCR66 rubber that is formulated specifically for the demanding requirements of today's....
50% More abrasion resistant than conventional CV boot material to assure long life in today's harsh off-road environments.
Rubber compound is tested to -40 degrees F to assure good performance & long life at low temperatures.
Kits include two stainless steel clamps that are designed to be tightened without the use of special tools.
Lithium based Molybdenum grease insures good lubrication for long CV joint life.

The All Balls CV Boot material is compounded from an OEM grade DCR66 rubber that is formulated specifically for the demanding requirements of today's ATV's & UTV's.
50% More abrasion resistant than conventional CV boot material to assure long life in today's harsh off-road environments.
Rubber compound is tested to -40 degrees F to assure good performance & long life at low temperatures.
Kits include two stainless steel clamps that are designed to be tightened without the use of special tools.
Lithium based Molybdenum grease insures good lubrication for long CV joint life.

The All Balls CV Boot material is compounded from an OEM grade DCR66 rubber that is formulated specifically for the demanding requirements of today's ATV's & UTV's.
50% More abrasion resistant than conventional CV boot material to assure long life in today's harsh off-road environments.
Rubber compound is tested to -40 degrees F to assure good performance & long life at low temperatures.
Kits include two stainless steel clamps that are designed to be tightened without the use of special tools.
Lithium based Molybdenum grease insures good lubrication for long CV joint life.

- Enables the repair of cv joints by replacing old, worn out boots without needing to remove the axle itself.
- Specially Formulated, Highly Flexible & Durable so it can be installed with the use of a Pneumatic CV Boot Installer, an Installation cone or the....
- Save Time and Money as compared to an axle replacement..
- Ideal for Preventative Maintenance that keeps the vehicle in its OE State.

MIKKUPPA CV BOOT CLAMP - Features a long piece of metal with a clamp on the end. Keep your vehicle driving smoothly and the axles rotating correctly.
PACKAGE CONTENT - φ1"-1.7" x 4pcs Small cv boot clamps & φ3"-5" x 4pcs large cv boot clamps.
STAINLESS STEEL - That is an ideal choice for areas that get a lot of rainfall or snow because the metal is resistant to rusting.
WHY CHOOSE US - Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues.
LIFETIME WARRANTY - If for any reasons and you are not 100% satisfied with your tie rod boot clamp, you are welcome to simply return it to us for a full refund at any time.