Best Cylinder Stand

BTS GQ KOREA 2022 January BTS Coverman GQ_Group

  • Direct replacement parts. This K-0650 Cylinder and Piston Ring Replacement kit will fit both the single cylinder oil-free pumps and the twin cylinder....
  • It is recommended on Twin Cylinder Air Compressor Pumps that both cylinder sleeves and piston rings be replaced at the same time so that the air....
  • This K-0650 is the most current direct replacement part and has the newest style D25837 coated cylinder sleeve..
  • The K-0650 approximate cylinder dimensions are as follows: Inside Diameter:2.365" Outside Diameter:2.495" Outside Shoulder:2.945" Total Height:1.980".
  • Please check the compatibility before ordering.
Check Stock

Avezano Unicorn Birthday Backdrop Pink Rainbow Cloud Unicorn Photography Background 5x3ft Vinyl Unicorn Theme Birthday Party Backdrops

  • VINYL MATERIAL--Made of vinyl cloth. It is light enough for a stand or to hang on a wall, but sturdy enough where it won't rip..
  • REMOVE CREASE--Roll it up tightly with a cylinder and then just waiting for 2 to 4 days. The wrinkles and crease are almost removed. If necessary, you can iron the back of the backdrop with steam iron but not dry iron. Iron it with low heat..
  • WIDELY USE--Newborn, Birthday, Baby Shower, Product Photography , Festivals, Decoration, Artistic Portrait, Photography Studio, Professional Photographer, Video Backdrops or Product Displays..
  • HOW TO HANG IT--It's better if you have a stand. If you don't have a stand, you can use tapes, tacks, command strips, etc. to hang it on the wall..
Check Stock

FaithLand Plant Pot 12 inch - Perfectly Fits Mid-Century Modern Plant Stand - Drainage Plug and Drainage Mesh Screen - Terracotta Color

  • ✅ ROUND CYLINDER POT -11 3/4" in Diameter, 11 3/4" in Height.
  • ✅ UPSCALE LOOK & LIGHTWEIGHT - Handmade of quality Fiberstone with Terracotta Color finish. It's chic and upscale look allows it to naturally fit in most home-decor styles. The unique material makes the modern planter durable and light in weight, much lighter than concrete pot or ceramic pot, easy to move..
  • ✅ DRAINAGE PLUG & MESH SCREEN- With a large drainage hole at the bottom of planter pot for appropriate draining, each pot contains a rubber drainage plug, your choice of draining your plants or not. It also comes with drainage mesh screen, place the screen over the hole to prevent planting soil from falling off while still allowing excessive water drainage..
  • ✅ A PERFECT MATCH FOR MID CENTURY PLANT STAND - The FaithLand plant pot and the FaithLand Mid-Century Plant Stand are best combination. Simply search Amazon for “plant stand” for perfect match. Let’s give your lovely home a boost now!.
  • ✅ POT ONLY - Plant stand not included..
Check Stock

2 Pcs Gold Crystal Metal Tealight Candle Holder for Centerpieces, 10.4 inch Tall Blingbling Hurricane Candle Holder, Decorative Cylinder Vases for Centerpieces Room Decor Party

  • CLASSIC UNIQUE CUTOUT DESIGN: Inspired by the classic geometric cylinder shape, this bedazzling beaded crystal candle holder is paired with classic sparkling crystals, hand-connected with wire for sparkling, understated luxury, helping to create a romantic and warm feel, the atmosphere gives people a clear and natural sense of royal dignity..
  • ANTI-CORROSION AND ANTI-RUST: The crystal tea light candle holder is made of selected high-quality octagonal K9 crystal beads, which have undergone nickel-plating, pressure casting, polishing, electroplating, polishing and other processes, gold rimmed inlay. The base is made of high-quality black flannel non-slip floor mats, which can well prevent scratches and damage to the furniture..
  • MULTI-APPLICATION: As a round votive candle holder, suitable for votive candles, tea light candles, jar candles, pillar candles, flameless electric candles, and can also be used as a vase with dried flowers/flowers/artificial bouquets to create an attractive floral tabletop display , can also be used as makeup brush storage, organizer or pencil holder or whatever else you can think of..
  • PACKAGE: Pack of 2 golden hurricane candle stand, elegant and luxurious crystal cylinder vase stand, height 26.5cm/10.43 inches, opening diameter 10....
Check Stock

Koyal Wholesale Cylinder Metal Vase Set of 3 Rose Gold Metal Cylinder Candle Holders Copper

  • INDUSTRIAL DECOR INSPIRED. Bulk set of 3 vases in different heights, great alternative to glass cylinder vases..
  • DECOR IDEAS: Excellent metal cylinder candle holders for pillar candles or floating candles.
  • SIZE DIMENSIONS: Each cylinder has 3.5 inch diameter and includes 1 cylinder vase 6 inch height, 1 cylinder vase 7 inch height and 1 cylinder vase....
  • MULFUNCTIONAL: Perfect for metal cylinder vase centerpieces with flowers, office holders, kitchen holders..
  • EASY TO USE: For decor use only. Not recommended for food use, not food safe. Easy care simply wipe clean with soft cloth..
Check Stock

MySit Gas Lift Cylinder Removal Tools 28mm/1.1-Inch, Removal Tools Sets for Replace Office Chair Cylinder, Fix Sinking Office Chair Stainless Steel Chair Saver for Stop Sinking - 2 Pieces

  • DURABLE CHAIR CYLINDER REMOVAL TOOLS KIT -- Mysit adjustable office chair cylinder removal tools are made of durable stainless steel. Package inludes 2pcs stainless steel cylinder clamp shafts, 2pcs long bolts, 1pc L wrench..
  • REPLACE GAS LIFT CYLINDER USE -- No other tools required, using this tool set to remove/replace many years sinking gas cylinder, let disassemble easily to save your strength and time..
  • NOTICE FOR CYLINDER REPLACEMENT: 1.Install the top ring collars on cylinder(using short screws), make sure this ring CAN slide along the cylinder.
  • 2.Install the below ring collars on cylinder(using short screws), make sure this below ring tightly enough and CANNOT slide.
  • 3.Install and tighten 2 long screws on below ring ALTERNATELY, to avoid the below rings tilt and cannot disassembly..
  • UNIVERSAL SIZE 28MM -- Office chair stainless steel removal tool kit fits for most office chairs (stools, executive chairs, office chairs, gaming chairs) with a cylinder within 1.1"(28mm) diameter..
  • FIX SINKING OFFICE CHAIR USE -- Universal size fits all height adjusting cylinder chairs, office chair saver for stop sinking can control the height of the seat, prevent repeated sinking, the office chair replacement parts can hold weight up to 600 pounds. It takes few minu....
Check Stock

VINCIGANT Gold Crystal Votive Candle Holders / Tealight Candle Holders Set of 6 for Office Table,Home Decorative Centerpiece,Gifts for Birthday,Wedding

  • ...AL BEADS: Each crystal ball is made of selected high quality octagonal K9 crystals.Hollow-carved design delivers a sense of dignity with natural freshness. With its unique fashion and elegant expression of the special passion and artistic taste..
  • ❦ ELEGANT&UNIQUE HOLLOW DESIGN:Beautifully fashioned in trendy lofty cylinder shape, this bedazzling beaded crystal candle holder features rows and rows of glinting beaded K9 crystals in luxurious metal wire frame for a pure royal look and feel. Combining the surreal sheen of lustrous metal with sparkling magic of selected crystals, this glam candle stand will add a touch of imperial elegance into your wedding, party, easter holiday decoration or special event’s ambiance..
  • ❦ DURABLE MATERIALS:Our cylinder candle lanterns are with triangle base which is the one of the most stable structure for furniture. And the Well made nice heavy metal frame is sturdy and more durable, rustless,fadelesst than other iron candle holders in the market..
  • ❦ COMPLEMENTARY USE:Our candle stand are used widely for votive candle/tea light candle/jar candles/pillars that less than 2.5 inches diameter.Place a small rose bouquet atop to create a mesmeric floral tabletop presentation. once you light your candles and LED light .The....
Check Stock

MOOSUN Cylinder Piston Gasket Top End Kit Fits 1988-2006 Yamaha Blaster 200 YFS200

  • 【BLASTER 200 CYLINDER TOP END KIT】Compatible with 1988-2006 Yamaha Blaster 200 YFS 200.
  • 【SPECIAL FUNCTION】MOOSUN Blaster 200 Cylinder replacement piston sets engineered from premium materials to provide exceptional service life and....
  • 【BLASTER 200 CYLINDER HEAD PISTON FEATURE】Cylinder piston set is the heart of engine. MOOSUN Cylinder has been factory honed and deburred to help....
  • 【PART NUMBER】2XJ-11111-00-00, 2XJ-11311-02-00,2XJ-11181-00-00, 2XJ-11631-01-97, 3JM-11351-02-00, 3JM-13621-00-00, B8E-S0000-00-00,....
  • 【CYLINDER PISTON RING GASKET KIT COMES WITH】1 x Cylinder, 1 x Piston, 1 x Piston Rings, 1 x Wristpin, 2 x Circlips, 1 x Needle Bearing, 1 x Head....
Check Stock

15810-RKB-J01 Vtec Solenoid Spool Valve with Gasket for 2005-2007 Hon-da Pilot Accord Odyssey 2.4L 3.0L 3.5L 15810RKBJ01

  • Reference OEM Number: 15810-RKB-J01. Please check the part number on your old part housing before purchase. Only part number is the unique ID..
  • Application Vehicle: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • Application Vehicle: 2006 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effectively have multiple camshafts. As the engine moves into different rpm ranges, the engine's computer can activate alternate lobes on the camshaft and c....
Check Stock

CDHPOWER Super Motor PK80 Replaement with Iron Sleeve Cylinder 49mm Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • CDHPOWER Super pk80 motor Replaement:Iron Sleeve Cylinder 49mm:Top End Cylinder Set and Bottom End Crank Set for 2 stroke kit 66cc/80cc pk80 motor kit.
  • High hole Piston kit installed well inside of cylinder and Long connecting rod AF80 or zmn80.
  • The casting cylinder head increases the horse power and this greatly cools off the engine. Would result better performance and longer life for your 2 Stroke Bicycle Engine. Casting cylinder head Height Max:51mm-52mm.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock