Best Cylindrical Bearing

INA SL045018PP Cylindrical Roller Bearing, Double Row, Fixed, Normal Clearance, Open End, Double Sealed, Oil Hole, Metric, 90mm ID, 140mm OD, 67mm Width, 2800rpm Maximum Rotational Speed, 117000lbf Static Load Capacity, 70000lbf Dynamic Load Capacity

  • INA cylindrical roller bearing with an open end ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Double row roller bearing for higher radial loads than single row bearings.
  • Open bearing for lubrication applied in place.
  • Metric unit measurements for industry consistency.
Check Stock

NSK N211W Cylindrical Roller Bearing, Standard Capacity, Removable Outer Ring, Straight, Pressed Steel Cage, Normal Clearance, Metric, 55mm Bore, 100mm OD, 21mm Width, 6300rpm Maximum Rotational Speed, 62500N Static Load Capacity, 58000N Dynamic L...

  • NSK 200 series cylindrical roller bearing with machined brass cage and removable outer ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable outer ring in open bearing allows for lubrication in place.
  • Brass cage evenly spaces rollers for reduced friction, vibration, and noise.
Check Stock

Sinoblu 10pcs LM3UU 3mm Bore Linear Motion Ball Bearing 7mm Outer Diameter 10mm Length for CNC Machine 3D Printer

  • [SIZE] - Model: LM8UU, 8x15x24mm Metric Double Seal Linear Bearing.
  • [USAGE] - Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways..
  • [FEATURES] - These ball bearing with two rubber dust sealed to prevent ingress of dirt, water and foreign matter.
  • [CAPABILITY] - Static Load Capacity (Cor): 265N, Dynamic Load Capacity (Cr): 402N (Recommended load is 80% of rated load, not to exceed rated load.).
  • [APPLICATIONS] - Mechanical slides, 2-axis and 3-axis tables, linear tables, 3D printers, ect..
Check Stock

SKF 22207 E/C3 Spherical Roller Bearing

  • Shaker screen two row spherical roller bearing suitable for applications that support radial and oscillating axial loads.
  • Machined brass cage spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise.
  • P5 precision outer ring with center lubrication groove and oil holes.
  • C4 radial clearance is larger than CN and C3 for applications where impact loads and vibration are severe, both the inner and outer rings are tight fitted, or thermal expansion is a factor.
  • Straight bore fits conventional cylindrical shafts.
Check Stock

INA SL182206 Cylindrical Roller Bearing, Single Row, Removable Outer Ring, Semi-Fixed, Flanged, Normal Clearance, Open End, Metric, 30mm ID, 62mm OD, 27mm Width, 6500rpm Maximum Rotational Speed, 19100lbf Static Load Capacity, 19600lbf Dynamic Loa...

  • Single row cylindrical roller bearing for applications that support high radial loads.
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F.
  • Non-locating bearing (two ribs on the outer ring, none on the inner ring) for allowing outer and inner rings to axially displace relative to each other from the central position.
  • Polyamide cage is lightweight and produces less noise and vibrations than brass cages.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock

labwork Lower Power Steering Column Coupling Shaft Universal U Joint Assembly 4713943 Replacement for Jeep Cherokee 1988-1994

  • Cylindrical bearings have a load capacity more than 5 times greater than ball bearings.
  • The Eternal Fix is the only Permanent fix on the market.
  • Avoid ball bearing solutios on the market.
Check Stock

12 Pcs LM8UU Linear Ball Bearings, 8mm Bore Dia, 15mm OD, 24mm Length with Double Side Rubber Seal Great for CNC,3D Printer

  • [SIZE] - Model: LM10UU, 10x19x29mm Metric Double Seal Linear Bearing.
  • [USAGE] - Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways..
  • [FEATURES] - These ball bearing with two rubber dust sealed to prevent ingress of dirt, water and foreign matter.
  • [CAPABILITY] - Static Load Capacity (Cor): 373N, Dynamic Load Capacity (Cr): 549N (Recommended load is 80% of rated load, not to exceed rated load.).
  • [APPLICATIONS] - Mechanical slides, 2-axis and 3-axis tables, linear tables, 3D printers, ect..
Check Stock

INA AS3047 Thrust Roller Bearing Washer, Metric, 30mm ID, 47mm OD, 1mm Width

  • Axial bearing washer for use with INA axial needle or cylindrical roller and cage assemblies in applications where adjacent components cannot serve as raceways and precise centering is not required.
  • Through-hardened chromium steel for durability and resistance to deformity under heavy loads.
  • Ground raceway for higher speeds and greater running accuracy than unground raceways.
Check Stock

INA AS3552 Thrust Roller Bearing Washer, Metric, 35mm ID, 52mm OD, 1mm Width

  • Axial bearing washer for use with INA axial needle or cylindrical roller and cage assemblies in applications where adjacent components cannot serve as raceways and precise centering is not required.
  • Through-hardened chromium steel for durability and resistance to deformity under heavy loads.
  • Ground raceway for higher speeds and greater running accuracy than unground raceways.
Check Stock

LM12UU Bearing, 10 Pcs 12mm Linear Motion Ball Bearings Bushing Slide Bearing Rods for 3D Printer Cylinder CNC Parts, Pack of 10, 12 x 20 x 30mm

  • [SIZE] - Model: SCV16UU, 50 x 24 x 38.5mm Metric Double Seal Linear Bearing, 16mm Nominal Shaft Diameter.
  • [USAGE] - Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways..
  • [FEATURES] - These ball bearing with two rubber dust sealed to prevent ingress of dirt, water and foreign matter.
  • Aluminium alloy housing to provide high strength and stiffness..
  • [CAPABILITY] - Static Load Capacity (Cor): 1180N, Dynamic Load Capacity (Cr): 774N (Recommended load is 80% of rated load, not to exceed rated load.).
  • [APPLICATIONS] - Mechanical slides, 2-axis and 3-axis tables, linear tables, 3D printers, ect..
Check Stock