Best Daido Milling

3.175mm Milling Cutter, Convenient Fine Workmanship Coating Milling Cutter Sharpness Cemented Carbide for CNC for SMT for PCB

  • The use of ultra-fine grained cemented carbide materials, with good milling and cutting performance.
  • The cutting edges, milling, holes and edges are of sharpness, with high efficiency.
  • Fine workmanship, clean and tidy surface, no burrs.
  • Including 10pcs milling cutters, convenient to replace and use.
  • Suitable For: PCB, SMT, CNC, mold, plastic fiber, carbon fiber and printed circuit board, etc..
Check Stock

Beall Collet Chuck, Mill Machine Collet Wear-resistant and Durable with ER32 Wrench Collet Chuck Holder for CNC Machining Center

  • This package includes 1pcs milling chuck holder, 1 pcs ER32 wrench and 8pcs ER32 Collet.
  • As milling machine accessories, convenient to replace the broken one.
  • Scope of application: This milling chuck holder is used for CNC machining center.
Check Stock

Aluminum Alloy Mini Handwheel Mechanical Hand Wheel 50mm (50x8mm)

  • Material: The lathe milling hand wheel of the lathe is made of high-quality bakelite, with strong insulation and durability.
  • Easy to install: The hand wheel has a detachable rotating handle, and the hand wheel has screw holes for easy handle installation.
  • Application: Revolving handle hand wheels are widely used in industrial machine tools, such as milling machines, lathes, grinders, etc.
  • Features: New type, convenient movement of the milling handle hand wheel, strong carrying capacity.
  • Unique design: This plastic lathe hand wheel is a rear corrugated hand wheel design, which is convenient to replace one of the broken lathes.
Check Stock

Milling Cutter, 3.175mm Milling Cutter, High Efficiency 10pcs Ultra-Fine Grained Cemented Carbide Materials for PCB SMT

  • Including 10pcs milling cutters, convenient to replace and use.
  • The cutting edges, milling, holes and edges are of sharpness, with high efficiency.
  • The use of ultra-fine grained cemented carbide materials, with good milling and cutting performance.
  • Suitable For: PCB, SMT, CNC, mold, plastic fiber, carbon fiber and printed circuit board, etc..
  • Fine workmanship, clean and tidy surface, no burrs.
Check Stock

Accusize Industrial Tools 2.5'' by 0.75'' Bore, 75 Degree Indexable Face Mills with 4 Pcs Apkt1604 Carbide Inserts, 0028-2601

  • Note: stop throwing away the used APKT16504 carbide inserts, uses the two unused corners of the APKT inserts to extends the tools life of the already used APKT 1604 carbide inserts.
  • Suitable for generic face milling. Surface milling for medium roughing. Recommend for CNC and traditional milling machines..
  • Uses the two unused comers of APKT 1604 carbide inserts..
  • Cutter Diameter: 2-1/2 inch, Number of Inserts: 4, Cutter Dia.: 2.5.
Check Stock

Drill Press Machines Parts Feed Hub Wheel & 195mm Handle Bar Set

  • Type: Straight, Cutting Type: 2 Flutes, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 2/3" (17mm), Overall Length: 1-33/64" (38.5mm).
  • Double flute design cnc router Bits have a mirror polish and large chip space which produces smooth cutting and fast chip-removal..
  • Industrial quality control to ensure best performance with high precision,work perfect on milling or cutting machines, ensure high work efficiency..
  • Made of tungsten steel material with good milling, cutting performance, ensure high work efficiency, durable and high precision..
  • Great for carving, cutting, engraving, milling in materials like density board, plastic, PCB, PVC, PP, MDF, nylon, resin, plywood, hardwood etc..
Check Stock

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

Preamer AP25 Adjustable Micro Angle Gauge High Precision Angle V Block 0-60° for Milling Lathe

  • Simple operation and high-efficiency.【Application】: In the milling machine, planer, drill press with adjustable angle grinder and regulations on the blade..
  • Easy to use for drilling, milling and setup applications..
  • Adjustable 0 to 60 degrees by locking the hex screw on the bottom..
  • Vernier scale is on moving block. HRC is 50-55.
  • Easy to use for drilling, milling and setup applications.It can be a cursor indicates stepless tilt adjustment angle, and then be secured with screws, used to create a variety of fixed angle processing, testing of workpieces..
Check Stock

CNC Milling Cutter, Fulte Milling Cutter for Professional Use for Workshop Processing for Factory for Electronic Components

  • Completely worn and durable, making a strong guarantee for the service life of the milling cutter to ensure that the cutting sharpness is longer..
  • This 4 flute end drill uses micro‑grain tungsten steel base material, which has higher wear resistance and strength..
  • The tool is an exclusive milling cutter for high‑strength high‑speed cutting applications..
  • This cutting edge is acute and the exterior is free of burrs, making it easy to operate..
  • The ultra‑fine carbide materials can ensure its engraving and milling performance..
Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock