Best Damper Thermostat

Vent Systems 8 Inch Backdraft Damper - Backflow Shutter - Heavy-Duty Inline Springs Loaded - One-Way Airflow Ducting Insert - Inline Fan Vent Deflector

  • Back draft damper for insertion into 8 inch ventilation ducts. The backflow damper opens and closes automatically. It has a strong spring and can be....
  • A tight sealing and fastening of the duct is achieved by the rubber strip attached to the inside of the draft blocker damper. The rubber seal prevents....
  • Designed for use in AC, dryer vent, exhaust, extractor or range hoods, heating systems, fans, vents and other residential, commercial and industrial....
  • Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves....
  • The backflow Preventer valve is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be....
Check Stock

Google Nest Thermostat Trim Kit - Made for the Nest Thermostat - Programmable Wifi Thermostat Accessory - Deep Fog

  • The Nest Thermostat Trim Kit is designed to cover imperfections on your wall from removing your old thermostat.
  • Designed for the Nest Thermostat, the ENERGY STAR certified smart thermostat that helps you save energy and stay comfortable.
  • Includes a trim plate for installing your on wall and a steel plate for installing your smart thermostat over an electrical box.
  • Modern design that looks beautiful in any home, with perfectly matched Nest Thermostat colors.
  • Easy to install, with everything you need included in the box.
  • The Nest Thermostat Trim Kit is only compatible with the Nest Thermostat.
  • Appearance of colors might slightly vary..
Check Stock

JXCOMEE Blacksmith Forge Blower Farriers Coal Forge Electric Blower (Outlet:3'')

  • 3" Inch Coal forge blower approx.180CFM,could regulate CFM Through the damper.
  • Highly popular with forge builders,it works for all situations..
  • Suitable for all forge tool and any coal forge.
  • Easy to hook up and operation ,Damper ajustable to control the Air volume.
  • Better Control on Airflow for Coal forge.
Check Stock

3387134 3977767 Dryer Thermostat,279816 Dryer Thermostat Kit and 3392519 Dryer Thermal Fuse Compatible with Kenmore Whirlpool Dryer ReplacementPart by AMI

  • PARTS NUMBER:3387134 3977767 Dryer Thermostat,279816 Dryer Thermostat Kit and 3392519 Dryer Thermal Fuse..
  • Replaces Part: 3977767 Dryer Thermostat : WP3977767VP,3399693. 279816 Thermostat Kit:279816VP, 3399848,3977393,AP3094244, PS334299. 3387134 Dryer Cycling Thermostat:3387139, 3387135,WP3387134, PS11741405. 3392519 Thermal Fuse: 3388651, 694511, 80005, WP3392519VP..
  • Package includes: 1 * 3387134 Dryer Thermostat, 1 * 3977767 Dryer Thermostat,1 * 279816 Thermostat Kit,2 * 3392519 Thermal Fuse..
  • Superiority: Saves you a service fee from the appliance guy!Easy to install..
  • QUALITY GUARANTEED : The replacement part is made from durable high quality material and well-tested by the manufacturer.Non original aftermarket part. Fits OEM Standards!.
Check Stock

Ventamatic XXFIRESTAT 10-Amp Adjustable Programmable Thermostat with Firestat for Power Attic Ventilators, Replacement Thermostat

  • FIRESTAT THERMOSTAT: The Ventamatic Firestat Thermostat controls power attic ventilators. The Firestat Temperature Range is 183°F at which point it cuts off the appliance..
  • ADJUSTABLE THERMOSTAT: The Thermostat is adjustable by the use with a simple screw driver adjustment. It has adjustable bi-metallic switch..
  • ENERGY EFFICIENT POWER ATTIC VENTILATOR: It provides energy-efficient operation of power attic ventilators and the temperature ranges from 50°F to 120°F..
  • REPLACEMENT THERMOSTAT: This Ventamatic Replacement Thermostat controls power attic ventilators to promote the equalization of temperatures inside and outside your attic. Firestat safety feature shuts fan off at 183F Controls up to three units, not to exceed 10 amps..
  • PROGRAMMABLE THERMOSTAT WARRANTY: This thermostat provides 10 years of warranty. It is of opening size 4.8 x 2.5 x 4.8 inches.
Check Stock

Wireless Programmable Thermostat Plug, Hycency Automatic Heating & Cooling Outlet Thermostat Wireless Temperature Controller Built in Temp Sensor with Remote Control LCD Display (1 Pcs)

  • PROGRAMMABLE THERMOSTAT: Programming the thermostat via the remote control, control distance reaches 66ft in the open area. With heating and cooling mode, thermostat allows you to program at temperature range 32-158℉(0-70℃)..
  • SAVE MONEY: This thermostat will help make your home not only Comfortable but energy efficient. The thermostat can save energy costs on heating or cooling. It saves energy by adjusting the temperature..
  • INSTALLATION: No installation or wiring, just plug thermostat into an outlet, plug your portable heating or cooling unit into the thermostat, and you’re ready to go. You can move thermostat plug to your desired position, convenient and flexible..
  • EASY TO USE: Automatic matching remote control and thermostat plug. select the heating or cooling mode via the remote control and set the target temperature. Accurate temperature control of ±1℃ for consistent comfort. Choice of ℉ or ℃ temperature display on LCD..
  • SAFE AND RELIABLE: 3-Prong thermostat plug with grounded terminal, recoverable overload short circuit and maximum load current up to 15A. Suitable for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater..
Check Stock

Honeywell ARD10TZ/U Automatic Damper, Round, 10' Diameter

  • Features galvanized steel with single-blade damper, which closes off tightly against gasket for minimal leakage.
  • Designated as power closed/spring return open damper for use with Honeywell zoning systems.
  • Can be field-converted when used as an independent zone or for fresh air intake.
  • Available in 5- to 10-inch, 12-, 14-, 16-, and 18-inch diameter sizes.
Check Stock

CXRacing Coilover Suspension For 1986-92 TOYOTA Supra MK3 III Pillow Ball Mount

  • CXRacing Damper CoilOver Suspension Kit with Pillow Ball Mounts.
  • for 87-92 TOYOTA Supra MK III (Don't fit AWD Model).
  • Pillow Ball Mount, 32 Step Damper & Ride Height Adjustable.
  • Street Sport Spring Rate: Front 14KG(781 lb/in) / Rear 10KG(558 lb/in).
Check Stock

Broan-NuTone RDF1 Premium Radiation Damper For Ventilation Fans, Compatible with Broan-NuTone Exhaust Fans, Steel Frame, 10.8" x 2.9" x 11.6"

  • HIGH-QUALITY DAMPER: Premium radiation damper for use in 1, 2, and 3 hour rated floor-ceiling and roof-ceiling constructions.
  • DURABLE: Features a galvanized steel frame construction and stainless steel closure springs for long lasting use.
  • OUTER FRAME: Separate outer frame allows complete fan and damper serviceability without disturbing the surrounding ceiling material.
  • FEATURES: Includes a high temperature, non-asbestos, reinforced thermal fabric and 165°F fusible link for your convenience.
  • COMPATIBLITY: Designed for use with Broan-NuTone LP80, LP110, RB80, RB110, XB50, XB80, XB110, ZB80, ZB110, and NuTone LPN80, RN80, RN110, XN50, XN80, XN110, ZN80, ZN110, XN50C, XN90C, XN110C, ZN90C, ZN110C.
Check Stock

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

  • FITMENT: Harmonic Damper Pulley Holder works on Toyota 3.4L V6 Tacoma 1996-2004, 4 Runner 1996-2002, Tundra 2000-2004, T100 pickup 1996-1998.
  • Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
  • HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pull....
Check Stock