Best Db Level For Mixing

HS8 8 inches Powered Studio Monitor Each (Renewed)

  • 8inch cone woofer and 1inch dome tweeter.
  • produce low distortion sound with a well-defined bottom end at any output level.
  • 38Hz - 30kHz frequency response. Power consumption: 60 watts.
  • 75W LF plus 45W HF bi-amp system 120W total. Level control (+4dB/center click) , EQ: High trim switch (+/- 2dB at HF) / Room control switch (0/-2/-4 dB under 500Hz).
  • ROOM CONTROL and HIGH TRIM response controls.
  • XLR and TRS phone jack inputs.Crossover:2kHz.
Check Stock

EMB Professional Sound System EB731EQ Graphic Equalizer/Limiter

  • Innovative technologies: a sophisticated technology, applications for various long-term maintenance-free performance. magnetic isolation transformer,....
  • Input Interlace: 1 / 4 inch TRS. XLR sockets (two feet for the hot side is the female head), and terminal strips Type: Electric balanced / unbalanced,....
  • > 40dB. typically» 55dB. 1KHz Output interface: 1/4 inch TRS. XLR sockets (two feet for the heat is end. each head), and terminal strips Type:....
  • CMRR 18d8u. balanced / unbalanced (connected 6000 load) Bandwidth: 20Hz-20KHz. +05 dB/-1Db Frequency response dynamic range: I09d8 115d8 SNR: 90dB....
  • Range (concealed): Select ± 6dB or ± 15dB fader upgrade/Attenuation Range / LED Output Level: 4-LED indicator strip icon (green, green, yellow, red)....
Check Stock

Presonus Bluetube DP V2 2-Channel Tube Mic Pre-Amp DP2+Mic+Shockmount+Headphones

  • ...ck Mount. (1)RockvilIe PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad. Features of Bluetube V2: Dual path, with both 12AX7 vacuum tube and solid-state gain stages. Combo mic/instrument inputs with Class A XMAX mic preamplifiers. Tube Drive tube-saturation control. Illuminated analog VU input-level meter.
  • Compact 1/2U rack-mount chassis. Dual path, with both 12AX7 vacuum tube and solid-state gain stages. Combo mic/instrument inputs with Class A XMAX mic preamplifiers. XLR and line outputs. Tube Drive tube-saturation control. 48V phantom power. 80 Hz high-pass filter. -20 dB pad. Polarity-reverse switch. Illuminated analog VU input-level meter. Compact 1/2U rack-mount chassis. Bluetube V2 Manual English (PDF). RCM03 Condenser Microphone (made of aluminum!).
  • 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device we need to update on ebay amazon, website, etc. 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power. Metal shock mount. Metal Anti-wind foam cap. Owners Manual. Warranty card. Features: RockvilIe RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. Aluminum high quality construction. Polar Pattern: Internally Polarized Condenser Cardioid Desi....
Check Stock

Rockville RG212CA Dual 12 inches Slim Vented Powered Car Subwoofer Enclosure 2000 Watt

  • ...@ 1w/1m: 89dB, Dimensions: 29.52" Length x 15" Height 4.37" Top Depth x 6.65" Bottom depth, Unit Weight: 40.12 Lbs.
  • Amp Features: Built-in 500 Watts RMS / 2000 Watt Mono Block Amplifier, 2 Ohm stable amplifier, Class D amplifier, Extruded aluminum heatsink stays cool even at high volumes, 200mV – 5V Variable Input Level.
  • 12dB Low Pass Crossover Frequency 50Hz-200Hz, Low Level RCA Inputs, Remote level attenuation: 0 to -32.2 dB, 3.7 second turn on delay, High Level Speaker Level Input with Auto Start Music Sense, RJ11 Jack for Dash Mounted Bass Remote.
Check Stock

Stagg Ribbon Microphone (SRM70)

  • A classic ribbon microphone featuring vivid, natural sound and quick transient response.
  • Perfect for vocals and a wide range of instruments, on the stage or in the studio.
  • Polar pattern: Figure-8 - Ribbon: Pure aluminium.
  • Sensitivity: - 52 dB +/- 2 dB (0 dB = 1 V / Pa at 1 kHz) - Frequency response: 20 Hz to 18 kHz - Output impedance: 350 ohms +/- 20 % (at 1 kHz) - Maximum sound pressure level: 148 dB (at 1 kHz ? 1 % THD).
Check Stock

Soundstream AR1.8000D Arachnid Series 8000W Class D Monoblock Amplifier (Renewed)

  • 1-ohm stable monoblock operation for maximum power.
  • High/speaker level and low level/RCA input.
  • Variable 12dB high and low pass crossovers.
  • 12dB bass boost increases low octave harmonics.
  • 1800 phase shift improves low octave dynamics.
  • 4-gage power wire and 8-gage speaker wire outputs.
  • Military grade PCB w/ PWM MOSFET power supply.
  • Direct short, thermal, and overload circuit protection.
Check Stock

PCIe Sound Card, 5.1 Internal Sound Card for PC Windows 7 /Vista/XP 32/64 bit with Low Profile Bracket, 3D Stereo PCI e Audio Card

  • The built-in audio chip supports 24bit,192kHz sampling rate, achieving powerful and clear sound effect..
  • 7.1CH(channel) audio system, compatible with 2.1/5.1 stereo surround sound system equipment..
  • Total harmonic distortion (THD short) playback (90 db)/ record (-85 db), SNR 100dB..
  • High quality Audio data, low latency Audio System Input Output..
  • Extended full duplex mixing, such as recording and editing the file while playing the audio source.
Check Stock

American Bass VFLCOMP2.5K VFL Competition Amplifier 2500 Watts D Class

  • 1 ohm stable D class mono-block amplifier, 2500 Watts RMS.
  • Variable subsonic filter: 10Hz to 50Hz at 24dB per octave.
  • Variable low pass filter: 35Hz to 250Hz at 24dB per octave.
  • Two amplifiers linkable connector and selector.
Check Stock

VLIKE Noise Sound Level Meter, Digital Decibel Meter with LCD, Audio Measurement 30 dB to 130 dB, DB Meter with A and C Frequency Weighting for Sound Level Testing

  • The Mini Handhold Digital Sound Level Reader is compact, lightweight,easy to use,it is not only extremely wear-resisting, but also elegant.
  • Features with backlight feature,it is appropriate for gathering the sound date at night. And backlight auto power off function is provided, high-reliability and well-designed high-efficiency power supply circuit make the battery more durable.
  • This Audio DB Meter complies with IEC651 Type 2 and ANSI S1.4 Type 2,with the measuring scope from 30 to 130 dB and automatic shifting function, A and C Frequency Weighting mode selection. With Maximum(MAX) locking function and High speed(FAST)/Low speed(SLOW) response rate selection.
  • It could be called as DB reader, phonometer or SPL meter,accumulate sound level value data for noise dosimeter, can be used as a noise monitor testing sound intensity to reduce Noise pollution,avoiding the risk to hearing damage.
  • The Noise Level Meter is an instrument used to measure the ambient sound level,such as sound level around factories, workshops, schools, residential, offices, road, audio etc.It also can be appropriate for noise engineering,product quality control,health prevention and treatment,etc.
Check Stock

Diamond Audio MICRO4V2 4-Channel 600 Watts RMS Class D Amplifier

  • ... board for enhanced performance and reliability | Full Range Class D amplifier technology | Bridgeable for high power operation (CH1+CH2/CH3+CH4) | Balanced differential inputs for superior noise rejection.
  • Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input | Input selector switch (2 CH / 4 CH) | Selectable auto-turn-on mode: Signal Sensing (VOX), 12V Remote (REM) and DC offset (DC) | Fully variable, 12dB per octave, electronic crossovers | Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller | Illuminated logo.
  • RMS Power Rating - RMS Power (2Ω): 150W x 4 | RMS Power (4Ω): 80W x 4 | Bridged (mono 1Ω): N/A | Bridged (mono 2Ω): N/A | Bridged (mono 4Ω): 300W x 2 | Topology: Full Range Class D Power Supply | Power Supply: Full PWM | Power Supply Threshold: 10.0VDC - 17.0VDC | Idle Current: (0.7A).
  • Distortion - THD 4 (1KHx @ 4Ω): 0.5% | S/N Ratio (A weighted @1W): -85dBA | S/N Ratio (A weighted @FP): -101.1dBA | Input Sensitivity - Low Input Level: 200mV - 10.0V | High Input Level: N/A | Input Impedance - Low Input Level: 20KΩ | High Input Level: 20KΩ.
Check Stock