USB Cigarette Lighter Adapter - iGreely USB A Male to 12V Car Cigarette Lighter Socket Female Cable Converter 1Ft/30cm
USB Port to Car Cigarette Lighter Female Socket Step up cable Power Converter, convert power from USB port to 12V car cigarette lighter socket..
Length: 30cm, USB Input: 5V 2A, Cigarette Lighter Socket Output: 12V 0.8A Max, depends on the power from your USB port. （Please check the rate power of the device you are going to use with this cable!）.
Easy to power on your car electronic equipments by extra power(such like a power banker)..
Easy to enable Parking Monitoring feature of your Car Dash Cam, don't worry to run out the battery of your car any more..
Multiple intelligent safety protection, boost module comes with over-voltage, short circuit and other multiple protection. Omni-directional protection of power supply equipment and electrical equipment safety..
OXLasers Adjustable 5V 650nm Red Line Laser Module for Positioning Laser Alignment Locator for Wood Stone Fabric Cutting Laser Swamp (Line)
Wave Length: 650nm , mW-(100), Working Voltage: 3.7-5V,.
Size: 80*21mm, big heatsink , long dutycycle, can work 5-6 hours constantly!.
Item comes with 5V DC adapter and a mount houlder! Line wideness adjustable!.
Packing list : Red Laser Module*1. 110-240V AC/DC Adapter*1, Mount Stand*1 , USB-DC Cable*1 (this cable is for connecting 5V USB Power Source, more convenience to use).
Attention: This is a Line Laser only, its NOT a CROSS laser, please dont buy this if you need a corss laser! This line laser is for cutting positioning, not a laser that can cut! There is a CROSS LASER available, its another item, not this one!! you can visit our store front to buy the CORSS one..
AOICRIE 5Pcs L298N Dual H Bridge Stepper Motor Driver Board For Arduino (5pcs)
【Package Included】- 2pcs L298N Motor Driver Controller Board Modules..
【Item Condition】- Drive voltage 5V-35V, high working power to 46V. Large current can reach 3A MAX and continue current is 2A. Power to 25w.(NOTE: To avoid damage, please use an external 5V logic supply when using more than 12V driving voltage.).
【High Quality】- Use L298N as the main driving chip, so the module has such features as strong driving ability, strong anti-interference and low calorific value. And it also use large-capacity filter capacitor and diode with freewheeling protection function, thereby improve the reliability of module..
【High Efficiency】- Dual-channel H-bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
【Easy of Use】- No assembly required. This L298N board comes ready to go. Just wire up motors and power, this thing will work wonders..
DC DC Buck Boost Converter Variable Voltage Regulator CC CV 0.5-30V 4A 5V 6V 12V 24V Power Module Adjustable Voltage Regulated Laboratory Power Supply
output voltage range is DC 0.5-30V, can be arbitrary adjustable.
output current can be 3A for long term use, if enhance heat dissipation, it can reach 4A.
max output power is 35W, if enhance dissipation, it can reach 50W.
LCD displays input/output voltage, output current/output power/output capacity/output time.The module can be set to ON/OFF by default.
Safe Protection: the module is with Anti-reverse connection protection of input end, so that it will not burn out when there is reverse connection.Anti-backflow protection at the output end. No need to add anti-backflow diode when charging. Multiple software protection mechanisms are available, and the protection threshold is adjustable. When the working parameters of the module exceed the protection threshold, the output will be automatically turned off.
Application: the volt conversion board can be used as an ordinary buck/Boost module with over-current protection.
used as a high-power LED constant current driver module.
DIY a solar power controller, Battery Charging.
Output ripple is small and πfilter is available.Thick heat sink .Buck-boost Integrated.
Liquid Ready Laser Marking Powder-"Brilliance Laser Inks" -BLI101MBLIQ120- Black Laser Ink for Metals Marking with CO2/Fiber/YAG (120 ml, Black)
Wave Length: 650nm ,mW (100.) , Working Voltage: 3.7-5V,.
Size: 80*21mm, big heatsink , long dutycycle, can work 5-6 hours constantly! Laser line can only be seen inside rooms or in a dark area! can not be seen under the sunshine!.
Item comes with 5V DC adapter and a mount houlder! Line wideness adjustable!.
PACKING LIST: Red Laser Module*1. 110-240V AC/DC Adapter*1, Mount Stand*1, USB-DC Cable*1 (this cable is for connecting 5V USB Power Source, more convenience to use).
Attention: this is just a cross laser for positioning, not a laser that can cut!.
Laser Engraver Cutting Module, LASER TREE 10W Output Optical Power Diode Laser Head, Double Ultra-Fine Compressed Spot Laser Cutter Module with Air Assistance, Laser Engraver for Wood and Metal, 24V
POWERFUL 10W DUAL LASER MODULE – The LASER TREE laser module has 80W machine power and 10W output power, 0.08*0.08mm compressed spot enabling finer laser engraving. The laser module engraves 304 stainless steel up to 300mm/s at a 45mm focus length. And laser cutter module ability to cut through 8mm thickness plywood by one pass at speed of 1.5mm/s. Excellent engraving speed & remarkable cutting ability for a better cutting/engraving experience..
AIR ASSIST & EYE PROTECTION MODES – AIR ASSIST Mode: LT-80W-AA laser engraver module is equipped with an air assist metal nozzle that can make material edges cleaner when cutting/engraving. That will greatly reduce burned marks and bring you an excellent cutting experience. (Note: Air-assisted pump not included) Mode 2: This laser module comes with a detachable eye protection cover. When engraving with this laser head, you could use this protective cover that can effectively filter blue light..
ULTRA-LONG SERVICE TIME – The main part is made of aluminum alloy to make the module structure more solid. And this laser cutter engraver module built-in fan cooling system, a fan speed of 10000 rpm, and cools efficiently to prolong service life. Original diode, high quality, lifetime up to 20,000 hours. Engraving ....
20 Pieces 3 Pins AMS1117-3.3 DC 4.75V-12V to 3.3V Voltage Regulator Down Power Supply Buck 800mA Module
How to install: please check the product pictures carefully for the wiring diagram steps before using, simple dual-panel design and the input output using the 3 pin single row pin for easy connection, the input voltage is higher than output voltage 1.2V, the module will work normally.
AMS1117-3.3 is a positive voltage regulator step down power supply module, support DC 4.75-12V input and 3.3V fixed voltage and 0.8A current output.
Electronic devices partner: the 3 pins AMS1117-3.3 voltage regulator mini step down power supply module, can be applied to electronic devices which need 3.3V power supply, such as SCM project design, MCU development and more, easy to be connected and provide the power supply.
Where to use: the voltage to 3.3V 800mA DC buck module is applicable for high-efficiency linear regulator published active power regulator battery charger active instrument.
Compatible with: the 3 pins AMS1117-3.3 voltage regulator mini power supply is compatible with Arduino MEGA2560, MSP430 development board, 3.3V low power consumption MCU, FPGA/CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc..
Provide more safety: the AMS1117-3.3 800mA DC buck module features overheat shutdown circuit provides overload and over-temperature protectio....
2 Oz - BLI101 - Aerosol Black Laser Ink for Metals Marking - CO2 Laser - Fiber Laser - YAG, Durable, Permanent, High Contrast, Brilliance Laser Inks
Wave Length: 650nm , mW-(100), Working Voltage: 3.7-5V,.
Size: 80*21mm, big heatsink , long dutycycle, can work 5-6 hours constantly!.
Item comes with 5V DC adapter and a mount houlder! Line wideness adjustable!.
Packing list : Red Laser Module*1. 110-240V AC/DC Adapter*1, Mount Stand*1 , USB-DC Cable*1 (this cable is for connecting 5V USB Power Source, more convenience to use).
Attention: This is a Line Laser only, its NOT a CROSS laser, please dont buy this if you need a corss laser! This line laser is for cutting positioning, not a laser that can cut! There is a CROSS LASER available, its another item, not this one!! you can visit our store front to buy the CORSS one..
