Best Dc Brushless Gear Motor

Antrader 4020 40x40x20mm 12V DC Brushless Radial Cooling Turbo Blower Fan for DIY 3D Printer Extruder Humidifier 3-Pack

  • 40 x 40 x 20mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5.
  • High quality mini brushless 4020 DC 12V fan, sleeve-bearing design cooling cooler..
  • Plastic construction fan. Dual Ball Bearing.
  • DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.23A.
  • Compact motor design for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
Check Stock

Brushless DC Motor 3000W 72V Electric Motor High Power Brushless Motor Controller 50A Scooter Motor Go Kart Electric Motor Kit

  • Brushless DC Motor 3000 watt powerful motor, The motor adopts all-copper lugs, high-quality magnets and rotors, low-noise operation and long service time.
  • 3000W 72V Electric Motor, 4hp high power and high speed, 4900rpm/min rate speed, 6700rpm/min max speed, 45 amp rate current , 5.4N.m. of torque and 100-150kg ( 220 - 330lb ) maximum load.
  • Brushless Motor Controller 50A, 48-72 volt, 3000 watt, 120°phase degree.
  • Multifunctional intelligent controller Low-level brake, 3 Speed, Reverse, Brake Light, Indicator Light, Battery Charge and Ignition Lock.
  • Three-speed Throttle: three speeds can be adjusted, low speed 50%, medium speed 75%, high speed 100% and also has a reverse switch, Cable length is about 150cm ( 59 inches ).
  • Package Include: 72V 3000W Motor*1pc, BLDC Controller 50A*1pc, 3 speed throttle*1pc, Ignition Lock*1pc, T8F Sproket*1pc, T8F Chain*1pc, Manual*1pc (without battery)..
Check Stock

Makita XCV17PG 18V X2 LXT® Lithium-Ion 36V Brushless Cordless 1.6 Gallon HEPA Filter Backpack Dry Vacuum 6.0Ah

  • Powerful BL Brushless Motor generates 78 CFM of suction power and 44" of water lift.
  • Up to 139 minutes of continuous run time on normal setting and 40 minutes on max setting using two 18V LXT 6.0Ah batteries BL1860B.
  • Dual Port Rapid Optimum Charger (DC18RD) charges two 6.0Ah batteries in only 55 minutes.
  • Efficient two stage HEPA filter captures 99.97% of particulates .3 microns and larger extending the life of the main filter.
  • The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life.
Check Stock

Yeeco Submersible Water Pump DC 5.5V-12V 3W 200L/M Brushless Fountain Water Pump with 4.9ft/1.5m Cord for Fountain Pond Fish Tank Aquarium

  • Well-sealed waterproof PV outer shell, submersible water pump durable and never get burnt by water.
  • Powered by DC brushless motor, brushless motor....
  • DC 5.5-12V electric water pump,universal voltage nice to connect with batteries.
  • 3W powerful water pump for fountain produce great power, and maximum....
  • Adjustable flow, 200L/M submersible water pump with rate adjusted switch, you can simply control the flow.
  • Also you can adjust flow by power input,....
  • Mini in size, micro aquarium water pump with small size suitable to tiny fish tank and pond.
  • Submersible fountain pump has suction....
  • Versatile submersible fountain water pump, ideal to use in washing machine, solar fountain, fish tank, pond, aquarium, cooling system, water....
Check Stock

RATTMMOTOR 400W Blushless CNC Air Cooled Spindle Motor ER8 12000RPM + 600W Blushless Spindle Motor Driver LCD Panel without Hall + 55mm Clamp Mount for CNC Router Milling Machine

  • 【Brussless Spindle Motor】Power: 400W.
  • Note: Please see clearly that this spindle motor output shaft is with ER8 collet,and output shaft is complete shaft, can't be exchanged to ER11, ER16....
  • 【Brussless Spindle Motor Driver】Maximum driver power: 600W.
  • Maximum driver motor running speed: 12000R/Min.
  • Brushless spindle driver(Model Name: NVBDL)is specialized for the ecomomic engraving machine,it matchs with the brushless DC motor. With the....
  • The users can take down the panel from the main driver and install it on the controller cabinet.By the panel,you can set the parameter,control motor....
Check Stock

GOORIDA 72V 3000W Brushless DC Motor Kit, 4900RPM Electric Motor with 55A Controller, 3 Speed Throttle, USD Charge, Compatible with Electric Go Kart, Bike, Scooter, ATV/UTV and DIY Engine Systems

  • 【Overview】Come with 1* 48-72V 3000W Brushless DC Motor, 1* 18 MOSFET 55A Controller, 1* 3 in 1 Throttle, 1* Foot Throttle, 1* USB Charge, 1* Power Lock, 1* Cruise Switch, 1* Chain, 1* T8F-11 Gear, 1* T8F-54T Tooth, 1* Junction Box, 1* Screw Pack..
  • 【Motor】The Motor adopts aluminum body, full copper coil with low noise and long service time. Torque: 5.4N.m, rated speed 4900rpm/min, Maximum load can reach 300 lbs..
  • 【Controller】Dual-Mode Intelligent Controller, Multi-function include cruise, reversing, speed regulation, anti-theft and etc. Labels on each harness for easy installation..
  • 【Fits】Suitable for DIY karts, scooters, electric bikes, ATV/UTV, Mini motorcycle, mopeds, electric off road vehicles, tricycles, DIY engine systems..
  • 【Satisfaction Guarantee】1 Year Warranty and for whatever reason, you are not satisfied, you can request a replacement or a full refund. If you have any questions, please do not hesitate to contact us. 7*24..
Check Stock

Sous Vide Machine Immersion Circulator: Ultra-quiet Accurate Sous-vide Cooker, IPX7 Waterproof Stainless Steel 1100W Professional Low Temperature Slow Cooking Machines by KitchenBoss

  • STAINLESS STEEL DESIGN: The parts of G300T sous vide in contact with water are made of food-grade SUS304 stainless steel, which is safe, robust, and high temperature resistant, avoiding any plastic materials that produce harmful substances when used at high temperatures for a long time!.
  • NOISE-FREE BRUSHLESS DC MOTOR: G300T suvee cooker adopts the same quality brushless motor as high-end UAV, which is very quiet. At the same time, the stainless steel sleeve diamond-shaped water inlet design and stainless steel double-sided inclined 45-degree angle spiral design pulsator reduce noise..
  • PRECISE TEMPERATURE CONTROL: The accurate cooker with high-power brushless DC motor and high accurate control chip ensure rapid heating during cooking, accurate temperature detection, and temperature stability. Temperature range 104°F-194°F (40°C-90°C)..
  • HEATED EVENLY: G300T sous-vide machine adopts super power motor, 2900r/m uniform rotation, and 16L/min water flow design, which improves the internal circulation speed of water. Cooking more ingredients in one pot can also ensure uniform heating..
  • WATERPROOF & EASY TO CLEAN: Sous vide cooker has passed IPX7 waterproof certification, and the whole machine can be washed in water. Removable stainless steel sleeve allows de....
Check Stock

Antrader 3-Pack 60mm x 60mm x 15mm 6015 12V Brushless DC Cooling Fan 2pin for DIY 3D Printer Extruder Humidifier

  • 3 Pack high quality brushless 6015 DC 12V fan, sleeve-bearing design cooling cooler..
  • Plastic construction 9 blade fan. Dual Ball Bearing.
  • DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.1A.
  • 40 x 40 x 10mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.560 x 60 x 15mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5.
  • Compact motor design for computer case 60mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
Check Stock

Ryobi 18-Volt ONE+ Lithium-Ion Cordless Brushless Drill/Driver-Impact Driver 2-Tool Kit w/ 2 1.3 Ah Batteries Charger,

  • Brushless motor provides longer runtime, more power, and longer motor life.
  • Brushless Drill/Driver: 460 in lbs of torque, 24 position clutch, 2 speed gearbox 0 to 500 RPM on 1 and 0 to 1,800 RPM on 2, Dual function 1/2 in.....
  • Brushless Impact Driver: 2,000 in lbs of torque, 1/4 in. quick connect coupler for quick and easy bit changes, Cast aluminum gear housing for strength....
  • MAGTRAY magnetic holder on both tools for convenient placement of screws and bits. NO Fastener belt clip on both tools easily mounts to either side of....
  • Batteries feature NO fade power for maximum performance. Batteries are compatible with over 100 ONE PLUS tools. Dual chemistry charger features....
Check Stock

Sous Vide Cooker Machine: 1100 Watt IPX7 Waterproof Water Thermal Immersion Circulator Accurate Temperature Control Digital Display Includes 5 Vacuum Sealer Bags by KitchenBoss

  • ...ny plastic bottom shell or propeller for a long time to heat and produce harmful substances!.
  • Ultra-silent design: the wave wheel uses stainless steel double-sided inclined 45-degree angle spiral design with stainless steel sleeve diamond-shaped water inlet design, to avoid the spread of sound to the greatest extent.
  • Brushless DC motor: G300/G310 uses the same quality brushless DC motor of high-end drones, 2900r/m uniform rotation, super power, more durable!.
  • Thermostatic control system: using high-precision control chip and powerful brushless DC motor to increase the flow rate of water, continuous monitoring of temperature and control of temperature stability to ensure that the temperature of every part of the ingredients remains the same!Temperature range 104°F-194°F (40°C-90°C).
  • Easy to clean and waterproof: It has been certified IPX7 waterproof and can be cleaned by putting the entire body in water, allowing you to deep clean every crevice of oil stains..
  • Healthy living: You can use G300/G310 sous vide cooker for spa eggs, steak, lamb chops, lobster, bacon, without overcooking, retaining more nutrients and vitamins so you can enjoy the perfect taste of Michelin high class chef every time!.
  • Super water flow: The sous vide adopts 16L/min water flow d....
Check Stock