Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger
This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..
BESTEK 150W Power Inverter DC 12V to 110V AC Converter 4.2A Dual USB Car Adapter Blue …
BESTEK Advantage: America's #1 power inverter brand. Provides 150W continuous DC to AC power and 250W instantaneous power, featuring 1 AC outlet and 2....
Patented Isolation Voltage Protection: This certified beast comes with low pressure and high pressure isolation and 25 amps fuse. Perfectly protect....
Fast Charging: Powerful 110V AC outlet for charging larger devices such as laptops and tablets. 2 USB ports (0-2.4A) for powering USB compatible....
A Must Have for Road Trips: Ultra compact and lightweight, only 3.2 x 2.5 x 1.5 inches, 8 oz+. Space-saving and easy storage. 32 inch cord makes it....
100% Satisfaction: 18-Months Warranty, ETL certification. Durable metal housing provides advanced protection from drops and bumps. Integrated silent....
Type: 6x EI14 Audio Transformers, used to transform voltage or transform load impedance..
Frequency Response: 20hz - 20khz, AC Impedance: 600 : 600 Ohm, DC Resistance: 140 : 140 Ohm, Inductance: 290 : 290mH.
Advantage: Stable performance, strong anti-interference, noiseless, two-channel function, singal stablity, no distortion, constant frequency, farther away, adapt to a variety of devices..
Made of high quality pure copper, stable and reliable performance. Solves the common interference problem caused by common power supply and eliminates the annoying sound of current..
Without external power source, passive isolation can eliminate noise, which can play a good effect of coupling isolation. Specially symmetrical designed to reduce noise and solve the communication noise caused by common ground interference..
INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max
【Mini Split Base Current Transformer】It's the smallest one compared to the similar products (output 100MA).Current Transformer, 100A 100mA AC Current Sensor, Split Core Amp Transformer Sensing Relay, Mini Clip-on Easy to Install CT Without Power Off. current sensor structure sensor.
【Professional Use】Current transducer used for energy meter in special.
AC 220v, 380v power supply can both be applied.plit Core Current Transformer,AC Current Sensor,Output Class Analog Sensor,Working Principle Magnetic Sensor, Useful for Measuring Whole Building Electricity Consumption.current sensing relay isolation.
【Good Mechanical Properties】Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
【Snap Joint Structure】The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
【Easy to use】When you fix the energy meter, you don't need to cut off the power if you use this product. Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter.ac transformer amp meter amp tester.
BESTEK 150W Power Inverter DC 12V to 110V AC Converter 4.2A Dual USB Car Adapter (Yellow)…
Patented Isolation Voltage Protection: BESTEK 150W Car Power Inverter equipped with low voltage and high voltage isolation, provides a perfect protection for your device.
Smart Dual USB: 4.2A output USB ports with smart IC that can automatically detect your devices to deliver optimal charging speed up to 2.4A per port, 4.2A total, one 110V AC outlets for charging larger devices such as laptops and tablets.
Safety Door & Multi-Protection: AC outlets with built-in safety door protecting kids from unexpected electricity Shock. Safe charging design provides protection against overheating, under and over voltage charging, short circuiting, overloads, and overcharging.
Ultra Compact and Lightweight: iphone-sized design ideal for use on vacations, work trips, and camping. 32 inch long cigarette lighter plug makes the power inverter can be plugged into almost any vehicle.
ETL certification: BESTEK 150W power Inverter with ETL certification provides 150 watts continuous DC to AC power and 250 Watts of peak power, 18 months warranty.
FEATURES - USB isolation 5000V DC between USB host and USB device. USB 2.0 compatible, 1.5Mbps low speed and 12Mbps full speed Bi-directional communication. Isolated power supply in device through a DC-to-DC converter. Transfer Rate 1.5 / 12 Mbps.
APPLICATION - Medical and Industrial Application USB to USB Single Port Isolator up to Full Speed 12Mbps. USB isolator is USB bus powered and can provide 5V 320mA to your USB device with built-in isolated DC to DC converter. This is possible when the isol.
COMPATABILITY - With support on multiple OS platforms this makes ours very versatile. Supported OS platforms are Windows 7, 8 and 10 as well as Linux and MacOS 10.X.
WHY Cablemax? Your Trusted Partner based in the USA, Providing Advanced Engineering, Highly Reliable and Superior Built Products to handle the most demanding industries for over 20 years. Reach out to us for CAD, Mechanical Drawings and, Data Sheets..
Supports Windows 7, 8, and 10. Mac & linux with no driver required..
0-10V Signal Isolation Module, S-10V10V Analog Quantities Voltage Signal Isolation Module for PLC/MCU Isolating High Voltage or Current (Voltage) Signals
➤【DC12-32V】- This isolation module need two complete independent DC12-32V power supply..
➤【Main function】- Main function is input 0-10V analog voltage signal,after isolation, output 0-10V analog voltage signal..
➤【Scope of Application】- Used to isolate high voltage or strong interference voltage or current (voltage) signal then transferred to PLC or controller MCU, isolating controlling end and controlled end, to assure stability and anti-interference ability of system..
➤【Use】- It will has better performance if install this module and controller in a metal box and box is grounded..
➤【Note】- The potentiometer is used to amend corresponding relation of output voltage. Output voltage can be fine adjusted and calibrated, normally it has already been calibrated..
Shuian 10 Pcs 3V Relay Power Switch Board, Songhe DC 1 Channel Optocoupler Relay, High Level Trigger for IOT ESP8266 Development Board.
The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
Equiped with high-current relay, AC250V 10A.
DC30V 10A,each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
Support dual power supply input ensure high anti-interference ability,high reliability of photoelectric isolation protection,The external connection uses the rotary crimping terminal, causes the wiring to be more solid..
You are free to select whether the relay and the signal share the same power supply or not by removing the jumper caps on the pins or not. It is recommended to share the same power supply, because that is more convenient for using..
Directv Msplit2r1-03 Approved 2-Way Wide Band SWM Splitter
DIRECTV Approved for Multi Room Viewing (MRV).
Diode steered protection with grounding port provided.
The SPLIT2MRV features one port (red) with a DC path for remotely feeding power back through the splitter up to the dish or multiswitch, making it convenient for indoor and outdoor use..
