Best Dc Servo Board

5 Pack ShareGoo 25T Aluminum Servo Horns M3 Threads Metal Steering Arm for RC Car Truck Buggy Airplane-Black

  • 25T Spline & M3 threads, the 25t servo horn compatible with Futaba Savox Xcore HSP HD Power TowerPro MG servo MOSTLY 25T standard servo motor.
  • Adjustable type servo arm,includes two steel bolts to secure the split-clamp onto the servo output..
  • Hard aluminum construction for precision and durability..
  • For Vehicle Type: for buggy, rc car, rc truck, rc truggy.
  • The metal 25t servo arms are better than most of the plastic material.
Check Stock

JUKI DDL-8700-Industrial Straight Stitch Sewing Machine,Power Stand Ship Assembled + Chair

  • Compound feed "unison," walking foot mechanism assures even feeding of several piles of slippery material.
  • Narrow cylinder arm - 50mm diameter - Semi-automatic lubrication system.
  • Simple wing nut adjustment permits raising and lowering of the center foot to allow for sewing different thicknesses of materia.
  • Sew up to 7/16" -- thread up to size 207 / Reverse feed.
  • It comes with sewing machine table and Electronic DC Servo Motor.Assembly required !.
Check Stock

ACEIRMC SG90 Servo Motor Micro Servo 9G Servo Motor for RC Robot Arm Helicopter Airplane Remote Control (5 Pcs) (5pcs)

  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on compatible for Arduino ,Raspberry Pi.
  • The SG90 mini servo motor is lightweight, high-quality and lightning-fast.The servo is designed to work with almost all the radio control systems..
  • SG90 Micro Servo Motor compatible for Mini Arduino Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with Cable.
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm).
Check Stock

CenryKay MG90S Servo, Helicopter QC Module 9G Servo Motor Metal Gear Micro Servo Motor Smart Robot Helicopter Plane Boat for Arduino Raspberry Pi Project(6PCS)

  • Metal gear servo 9g is equivalent to the metal tooth plate of SG90. The installation size is slightly different from that of SG90. The servo system is more comfortable than cheap plastic gears..
  • Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller..
  • This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware..
  • The servo motors weight is 13.6g, suitable for 450 electric straight, swash plate steering gear, fixed-wing RC airplane..
  • The package included 6pcs MG90S Micro Servo, each MG90S come with one motor and three servo arms and three screws..
Check Stock

Globact RC Digital Servo Tester/ESC Consistency Tester for RC Helicopter Airplane Car(Servo Tester,ESC Consistency Tester,RC Helicopter Tester Tool)

  • 【High Srecision】The RC ESC tester used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds).
  • 【Button The Select】 (Note: the key switch function, circulation patterns) 1. S-1 manual mode (Manual) 2.S-2-bit mode (Neutral) 3.S-3 automatic mode (Automatic).
  • 【Keys Pulse Width】1. 50H analog servo signal cycle 20us frequency 50Hz, 2. 125H digital the steering gear a signal cycle 8us frequency 125Hz,3. 250H Digital Servo signal cycle 4us frequency 250Hz.
  • 【Powerful Testing Function】RC plane servo tester can test the steering gear is able to respond to subtle changes With PPM signal test function in the display.
  • 【How To Use】Digital or analog signal button selects the corresponding servo system and then plugs into the steering servo to avoid damage to the steering servo.
Check Stock

Audio-Technica AT-LP60XBT-SV Fully Automatic Bluetooth Belt-Drive Stereo Turntable Silver Hi-Fi 2 Speed Dust Cover Anti-Resonance Die-cast Aluminum Platter

  • High-fidelity audio with Bluetooth wireless technology.
  • Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via....
  • Compatible with aptX codec. Output Wattage 3 00.
  • Fully automatic operation with two speeds 33-1/3 and 45 RPM.
  • Anti-resonance die-cast aluminum platter. Power Source Type DC. Motor: DC servo-controlled.
Check Stock

FEETECH 35KG Servo Motor 360 Degree High Torque Digital Servo High Voltage Waterproof Metal Gear Aluminium Case for RC Helicopter Airplane Car Boat Robot Controls - FT6335M

  • HIGH QUALITY SERVO: FT6335M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 360 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..
Check Stock

BETU 35kg Waterpoof Servo, Full Aluminum Case and Stainless Steel Gear Servo, High Torque Servo Compatible with 1/6，1/8, 1/10, 1/12 RC Car/Robot/Boat

  • High Torque Servo：This 35kg Waterpoof Servo's maximum torque is up to 35 kg/cm@7V, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat..
  • Waterpoof Servo: Waterproof performance IP67. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control..
  • All metal servo: Equipped with full aluminum case and stainless steel Gear, CNC aluminium middle shell, less noise, light weight, higher operating accuracy..
  • Product Dimension: 1.57 x 0.78 x 1.57 inch(40 x 20 x 40 mm).
  • With one 25T adjustable metal servo arm, one 25T round type servo horn and one set of accessories..
  • Great digital Servo for people who are interested in developing software for robot parts, Such as mechanical arm, Quadcopter Drone and other remote control equipment..
Check Stock

Juki LU-1508NS Industrial Walking Foot Sewing Machine, Vertical Axis Hook, Servo Motor

  • ...nch. Needles: 9-18 DBX1 (16x231) up to size 19 Sewing Speed max.: 5,500 spm Stitch Length max.: 5 mm Presser Foot Lift by hand, max.: 5.5 mm.
  • by knee, max. 13 mm Needle Bar Stroke 30.7 mm Hook: auto-lubricating full rotary hook Industrial Sewing Machi.
  • ✅It comes complete with sewing machine table and Electronic DC Servo Motor 3/4 H.P, 1 PHASE, 110 VOLT, 0 ~3300 RPM,(drawer, belt, tools, led lamp and instruction manual PDF format ) brand new ✅ Includes: Thread Stand Bobbin Winder Oil Pan/Knee Lifter 5 Extra Bobbins 10 Extra Needles Instruction Manual Screw Driver Machine Oil Table top (size 48" x 20") Heavy Duty Legs, Table Top,*Servo motor V Belt Hardware..
Check Stock

Traxxas 1/10 Slash, 2WD, RTR (Includes Battery & Charger): PinkX

  • Traxxas 58034-1 - Slash XL-5 Brushed 1/10 2WD SCT RTR, w/ iD Battery, Pink.
  • Features: Titan 12-Turn 550 modified motor XL-5 waterproof electronic speed control Water-sealed receiver box and steering servo Metal gear Magnum 272 transmission Torque-Control slipper clutch 30+mph top speed Adjustable steel turnbuckles with captured rod ends The tires are mounted on satin-finish 2.2" Slash wheels Included optional 23-tooth pinion gear Traxxas 4-amp DC Peak Detecting Fast Charger Traxxas Power Cell NiMH Battery with iDTM Avai.
  • Includes: (1) Slash Short Course Race Truck (1) TQ 2.4GHz Radio System (1) ESC,(1) Body (1) Motor (1) 7-Cell 3000mAh NiMH Battery (1) 4-Amp DC iD Car Charger Illustrated Instruction Manual Decals.
  • Specs: Vehicle Dimensions: Length: 22.36" (568mm) Width: 11.65" (296mm) Height: 8.42" (214mm) Front and Rear Track: 11.65" (296mm) Distance Between Outer Edges of Wheels Wheelbase: 13.2" (335mm) Ground Clearance: 3.5" (89mm) Weight: 76.2oz (2.16kg) Body Dimensions: Length: 21.3" (542mm) Width: 11.4" (289mm) Height: 5.3" (135mm) Height: 5.3" (135mm).
  • Part number(s) included (in factory packaging): 58034-1.
Check Stock