Best Dc Servo Motor Controller

FURITEK Iguana 20A/40A Brushed ESC for AXIAL SCX24 with Bluetooth Combo

The FURITEK IGUANA esc is designed to work with BOTH stock brushed motor and sensored/sensorless brushless motors of your favorite on the Axial SCX24 crawlers..
Designed with FOC (Field-oriented control) technology, it provides insane slow speed with powerful stable torque, low noise, high efficiency, and has a high-speed dynamic response..
And with bluetooth module option, you can run telemetry and all amazing parameters on smart phone apps..
The difference between this IGUANA esc and TEGU Main Board for Axial SCX24 Crawler is that the TEGU main board includes servo out for extra application and LED control capability which the IGUANA does not have. The IGUANA also has smaller BEC than the TEGU..
- Support sensorless brushless DC and brushed DC motor (config via app, default is brushed).

3-Pin Servo extension cords cable lead male to female plug..
Line length: About 50cm / 19.7inch；Packing quantity:10pcs..
This comes in very handy when your servo is further away from the controller than the wire on the servo allows..
Male connector on one end goes to controller, female connector mates with servo, allowing it to work in either system or as an adapter between systems..
Practical Range: Airplane, Helicopter, Quad Copter / Multi-Copter RC Cars, For Servo Connection or Receiver Connection..

HIGH QUALITY SERVO: FT5330M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life..
GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system..
SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 180 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable..
STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.4V, the stall torgue is (6V) 400.65oz/in(28.8kg/cm), (7.4V) 493.86oz/in(35.5kg/cm). The servo size is 55X20x43mm..

The Mini ECS Motor Servo Centering Tool can easily detect the clearance, jitter and median of a kind of Servo ..
With Good stability and high accuracy,could connect the ESC and test the working status of the ESC or Motor easily..
It is able to connect three sets of servo or ESC at the same time, use SCM to control..
Power Supply:ESC built-in BEC or UBEC(4-5 pcs of #5 battery) to Provides power to the tester..
FPV Drone RC Servo Tester High Precision ECS Motor Servo Centering Tool for Remote Control Models RC Airplanes..

Application Fields: remote control helicopters, micro robot, robot arm and boats. ALL kind of R/C Toys and Arduino project..
Stall Torque (4.8V): 17.5oz /in (1kg/cm).
Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Maximum....
Amplifier Type: Analog controller. Operating Voltage: 4.8V～6.0V.
NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW....

This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).
The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear ..
Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees.
Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..

The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).
Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear ..
Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees.
Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..

Speed Control Switch Low Voltage DC 3V 5V 6V 12V 5A.
Motor Speed Controller with a self-recovery fuse 5A and a Power-On LED light.
Provide a continuous current of 5A to your DC brush motor or other DC load.
This mini controller will be disconnected automatically if the current is too large and the fuse will recover automatically after cooling.
Please just contact me by email if there are any issue and I will solve it within 24 hours.

...inish for water resistance and high working efficiency..
Sturdy Aluminum Construction: The electric go kart motor features an aluminum alloy shell to resist heat, cold, and corrosion, which is not easy to rust. This dc electric motor is a forward and backward rotation motor so that you can switch the rotation..
Speed Controller Included: This brushless go kart motor comes with a controller to provide speed control in the desirable ranger, speed adjustment way: Potentiometer. Model: BY15WF02-A, Current: 34A, Phase Degree: 120°, Conversion Efficiency: ≥ 85%, Under Voltage Protection Voltage: 41V..
Multiple Application: Brushless motor is much better than the brushed motor due to its high efficiency, power frugal, low noise, long lifespan, stable operation. It is suitable for go karts, scooters, e-bike, ATV, motorized bicycle, moped, mini bikes, pocket bikes, etc..