Aoyue 2703A+ SMD Professional Repair & Rework Station With Hot Air Soldering Iron and a Desoldering Tool
HIGH PERFORMANCE - All in 1 Station that has a 70 watt High Powered Desoldering Station with a long life Ceramic heating element, 70 Soldering iron with Smoke Absorber to keep fumes away and a 500 Watt Hot Air system. Atmega6A Microprocessor from Microchip and a proprietary software proportional control of the temperature. Very easy intuitive user interface with large LED Display. Daul Port system can run 2 devices at the same time. 12 Volt high Flow Vacuum Pump that produces up to 15 L/min..
BUILT FOR SAFETY - The tools has zero crossing circuitry to prevent electrical surges. CE Certified and ESD Safe. Uses low voltage for the soldering and desoldering irons and vacuum pump. Smoke absorber filters harmful fumes when soldering..
INTELLIGENT FUNCTIONS - It has several advanced features such as digital calibration and configurable auto sleep function that is adjustable from 1-60 minutes. 5 Segment programmable auto reflow function..
VERSATILE SOLDERING IRON STAND - The configurable stand can be setup with the spool holder on either side of the station and there is an optional sponge holder. Includes a TY-98 Brass Coil Tip Cleaner, The stand will fit any of the available irons..
WHAT YOU GET - 1 x Aoyue 2703A+ Station with Hot Air ,Desoldering iron, Solder....
Helping Hands Soldering, NAKOOS Third Hand Soldering Tool PCB Holder Station with 4 Flexible Metal Arms Solder Iron Stand Heavy Duty Steel Base for Jewelry Crafts Repair Hobby
... adjustment extra rubber cover for PCB. Locks in place with knurled thumb nuts..
【Detachable Soldering Iron Stand】There is an additional metal soldering iron stand contained in the pack, solving the issue where to place the soldering pen after using. The stand is detachable and easy to install. Suitable for desoldering work..
【Widely Use & Service】 This solder station is easy and simple to set up, could be widely used in soldering, desoldering, electronic repair, crafting, modeling. NAKOOS is strict with quality and every product is fully inspected. THREE MONTHS unconditional exchange and return policy is supported..
The braided solder wicks are suitable for labs, home and industry welding work,can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
This desoldering wick has geometrically-precise weave with copper wires with nice quality and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.12 inch in width, enough quantity and length for your daily needs.
If you are using the solder wick for the first time, it is recommended to use a multi-point flux to assist in cleaning，At the same time, in order to prevent burns, do not directly touch the solder core at close range during use..
If for any reason you are not 100% satisfied with lesnow solder cores, we sup....
The main body of the desoldering pump is made of high-quality ABS material, with a non-slip sponge. The nylon nozzle can withstand high temperature, anti-static, heat-resistant, durable, special design, convenient for one-handed use..
High-quality desoldering braided tape is woven with fine copper wire, unique no-clean flux, easy to use, pure oxygen-free copper wire, 2.5mm / 0.1 inch width and 1.5m / 59 inch length, can help remove excess Avoid solder,Avoid short circuit， especially in hard-to-reach small areas..
Micro Shear Wire Cutter Pliers are made of high quality steel, with strong cutting ability, For cutting flexible cords up to 1 mm, non-slip handles, return springs, small volume。.
Solder wire diameter: 0.8mm, weight: about 0.35 ounces / 10 grams. Easy to carry and store, suitable for various soldering irons..
Suitable for correcting errors on PCB boards, cleaning small components, resoldering and desoldering circuit boards, Appliance Repair, Family DIY lovers, welding, etc..
CCOZN Solder Wicks, 2 Pack No-Clean Solder Braided Wicks Desoldering Wicks For Solder Removal Tool, 0.1 Inch Width 1.5 Meter Length
☃[Package Include] You will get 2 packs No-Clean Solder Braided Wicks.
☃[Appropriate Size] Package includes 2 pack 2.5mm x 1.5m / 0.1inch x 5 ft solder wick.
☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder..
☃[Solder Braided Wicks]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
☃[Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering..
1. Wide range of uses：Desoldering pump is widely used in the electronics and electrical industries, suitable for precision small devices, integrated circuit pins, home appliance repairs, digital repairs, etc., efficient and portable to remove waste tin residue..
2. Ergonomic design: Desolder pump adopts aluminum alloy shell, the operation is not slippery, the grip is comfortable, and the use is convenient..
3. High-quality suction nozzle: Good solvent resistance, lightweight design, easy to carry, suitable for long-term use, and improve work efficiency..
4. Strong suction power: Solder sucker desoldering pump adopts stainless steel push rod, internal spring adopts back pull design, instant suction power is strong..
5. Press lightly and quickly rebound: Desoldering suction pump adopts high-efficiency tin scraping method, which is easy to remove tin debris from the suction nozzle and not easy to block..
What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs.
No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards.
Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency.
Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work.
Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
Soldering Iron Kit [Upgraded] 60W Adjustable Temperature Welding Tool with ON-OFF Switch, Rarlight Soldering Kits, 5pcs Soldering Iron Tips,Desoldering Pump,Solder Wire,Soldering Iron Stand,Carry Bag
...ction technology, fast heats up, adjustable temperature with large venting holes. can be rapidly heated in 30 seconds, featuring on/off switch makes it energy saving and ensure safe welding. The insulating silica gel cover can effectively protect the iron from overheating or dropping.
【Upgrated One-handed Use Desoldering Pump】- Rugged metal construction, resistance to beat and corrosion. The disordering pump is high pressure vacuum tube with aluminum body frame, which allows easy one-handed use. High pressure vacuum can remove solder from a printed circuit board effectively.
【11-in-1 Soldering Iron Kit】- Soldering iron kit comes with soldering iron, solder wire, desoldering pump, stand with cleaning sponge, 5 Multiple soldering tips and a PU carry bag. This tool set can meet all of your soldering project needs.
【0.8 mm Solder Wire】- The diameter of the electrical soldering wire is 0.8 mm/ 0.031 inch, It weighs 50 g/ 0.11 lb, the total length is about 57m, which can be used for a long time. Easy to be soldered, flows smoothly, soldering fast and strong soldering point.
【Application】- The soldering iron sets are suitable for DIY, various repaired usage of electronics and circuit board, welding, jewelry, guitar, watches, wiring, mobile ....
