Best Diamond Saw Wheels

Lenox Tools 1211932DGHS 32 Diamond Grit Hole Saw 2-Inch or 50.8mm red

  • LENOX Diamond hole saw has a brazed diamond edge for more holes in tile and stone.
  • Diamond-tip hole saw has a durable, robust design for greater versatility in tough applications.
  • Diamond-tipped hole saw cuts holes in less time than carbide-grit or carbide-tipped hole saws.
  • Round holes make removing plugs faster and easier.
  • Uses a 2L, 3L, 6L or 7L standard arbor or a 2L or 6L SNAP-BACK arbor.
Check Stock

Delta Diamond Cost Cutter 6 Inch Segmented Diamond Blade, 7/8\-5/8\ Arbor, General Purpose Cutting/Grinding Concrete, Masonry, Stone, & Similar Materials (6\)

  • STANDARD GRADE - Standard grade diamonds deliver the best combination of cutting speed and tool life at a low cost per cut..
  • GENERAL PURPOSE - Use on a wide variety of materials such as concrete, masonry, brick, block, stone, and similar materials..
  • USE WET OR DRY - Heat-treated high-speed steel core is durable enough to withstand dry cuts. Use with water for increased performance..
  • SPECIFICATIONS - 6" diameter X .080 thick with a 7/8" arbor hole. Included is a 5/8" bushing for adapting to any hand-held grinder or trim saw. The maximum safe operating speed is 10,185 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

EZARC Diamond Oscillating Tool Blade Set Multi Tool Mortar Cutting Saw Blades Precise for Grout Removal and Soft Tile Cut 4-Pack

  • 【Diamond Oscillating Blades Set】Great set with 3 different types of diamond saw blades, easily remove tough grout between tiled surfaces. Three....
  • 【Long-lasting & Durability】Diamond grit oscillating saw blades have 5 times longer life than carbide grit blades in tough applications. Our....
  • 【Precise & Clean Cut】 The diamond grit kerf design of the oscillating blades provides precise and clean cutting effect. Oscillating multitool....
  • 【Cutting Material】This diamond oscillating multi tool blade is used to remove defective tile grout, cut soft tiles, plaster, and porous concrete....
  • 【Multi-application】EZARC diamond oscillating saw blades can be used for bathroom renovation, flooring work, trimming and correcting work, remove....
Check Stock

Delta Diamond Cougar HS 14 Inch Segmented Diamond Saw Blade, Premium, General Purpose Cutting of Concrete, Masonry, Pavers, Stone, .125 X 1\-20mm Arbor (14\)

  • GENERAL PURPOSE - Cougar HS diamond saw blades are for general purpose cutting of soft to medium aggregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 14" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the d....
Check Stock

Delta Diamond Cougar HS 10 Inch Segmented Diamond Saw Blade, Premium, General Purpose Cutting of Concrete, Masonry, Pavers, Stone, .095 X DM-7/8\-5/8\ Arbor (10\)

  • GENERAL PURPOSE - Cougar HS diamond saw blades are for general purpose cutting of soft to medium aggregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 10" diameter X .095 thick with a standard DM-7/8"-5/8" Arbor. Fits most 10" concrete saws and masonry saws. Make sure to check your saws arbor to ensure correct fitment. Max. 6,115 rpm..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamo....
Check Stock

Delta Diamond Cougar HS 12 Inch Segmented Diamond Saw Blade Premium General Purpose Cutting of Concrete Masonry Pavers Stone .125 X 1 -20mm Arbor 12

  • GENERAL PURPOSE - Cougar HS diamond saw blades are for general purpose cutting of soft to medium aggregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 12" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 6,300 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between t....
Check Stock

LSA 14 Inch Concrete Saw Diamond Blade,U Shape Carbide Tipped 14 Inch Turbo Segmented Saw Blade,for Concrete Block,Paving Brick,Reinforced Concrete

  • 【Specifications of 14 Concrete Saw Blade】 Segment height 12mm. Arbor 1 inch -25.4mm. MAX RPM 5460 r/min.The holes on core decrease weight and improve cooling,turbo blades remove the debris easily..
  • 【Diamond Sand】 The high density of emery makes the LSA 14 in. segmented diamond blade tip super hard to achieve fast cutting, smooth cut without burrs,extremely fast cutting speed..
  • 【Wet and Dry】 The LSA 14 diamond blade concrete dry cut ensures a smooth cut, while the wet cut gives you the same feeling as cutting butter to maximize cutting life while reducing the cost per cut..
  • 【Applicable Cutting Materials】Concrete block,paving brick,cured concrete,reinforced Concrete can be cut with 14 inch diamond blade stones, but not for cutting metal, plastic, glass..
  • 【Applicable Models】Hand held saw,masonry saw and walk behind saw.Premium diamond U shape teeth can less stress on the operator and machine..
Check Stock

IRWIN 10-Inch Circular Saw Blade, Carbide, 40-Tooth (15270)

  • Corrosion-resistant coating on the circular saw blade helps prevent rusting.
  • Precision-ground, carbide-tipped teeth let each circular saw blade make smooth, accurate cuts.
  • Circular saw blades are designed for wood cutting.
  • 16° hook angle with 40 teeth and ATB grind.
  • 10" blade length with 5/8" diamond arbor and 0.102" kerf.
Check Stock

Super Thin 7" Diamond Ceramic Saw Blade Porcelain Cutting Blade for Cutting Ceramic Or Porcelain Tile

  • 【Size & Material】: This tile blade is made of quality metal alloy with diamond grains, which is durable and high strength. Available in various sizes to choose, the size is: 180 x 10 x 1.4 x 22.23mm, Thickness: 1.4mm, Outer Diameter:105mm /7 inch, 7/8” arbor, Diamond concrete saw blade has a tough body with 1.4mm thickness..
  • 【Tile Saw Blade Wet & Dry】: This 7inch tile blade features a 10mm diamond rim, Super thin porcelain saw blade with free chips for cutting, Matched with hand-held machine with a 7/8" or 5/8" Arbor, It can be used on different types of angle grinders and tile cutters, Ideal for Wet and Dry cutting. Furthermore, it is easy to install and ready to use..
  • 【Turbo Rim Design 】: The wet saw blade has turbo rim edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. They have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts..
  • 【High Performance】: Diamond saw blades comes with X teeth offer fast and smooth cutting. High-Performance diamond matrix provides long life and enhanced material removal. this blade cuts through porcelain like butter. 1.4mm thickness can keep ....
Check Stock

1 3/8 Diamond Hole Saw Core Heavy Duty Diamond Drill Bit Concrete Granite Quartz Porcelain Slab Countertops Ceramic Tile Brick Brazed with 5/8″-11 Thread 1-3/8 in

  • Heavy duty. pro grade, vacuum brazed diamond hole saw for quartz, granite, concrete, cinder block, brick drilling..
  • Diameter is 1-3/8 inch with 5/8 inch – 11 threaded connection, maximum depth of cut is 1-3/8 inches..
  • Diamond vacuum brazed commercial grade, long life diamond core drill bit hole saw. For heavy duty professional applications..
  • Tile core bits used with core hole drill tools with 5/8 inch -11 threaded angle grinder or other tools..
  • Commercial grade, professional quality heavy duty diamond bits for drilling stone, diamond hole saw bits, diamond drill bit for granite bits for drill.
Check Stock