Best Die Grinder Flap Wheel

2 Inch (50mm) Hook and Loop Sanding Pad for Sanding Discs with 1/4 inches Dia Shank Drill Attachment + Soft Foam Layer Buffering Pad (5 Pack)

  • ★ 【SIZE】Pad diameter: 2'' (50mm), shank diameter: 1/4 inch (almost 6.35mm). Buffering pad thickness: 1/2 inch (13mm)..
  • ★ 【SHANK BACKING PAD AND BUFFERING PAD】6.35mm shank sanding pad suitable for most kinds of rotary tools, such as electric drills, die grinders, air grinders, etc. The max operation speed is 10000rpm. Buffering pad, suitable for uneven surface polishing, protection against damage to backing pad, convenient replacement..
  • ★ 【RELIABLE MATERIAL】 The sanding pad is made of polyurethane, with good durability and flexibility, reliable to use and not easy to break, it works for minimizing the heat transfer and increase the service life of the tools.
  • ★ 【APPLICABLE OBJECTS】 Our standard sanding disc replacement pads can work with die grinder, air grinder, electric drill and more, can withstand maximum operation speed of 10000 rpm, applicable to most rotating tools.
  • ★ 【VARIORS APPLICATION】 This buffing wheel disc pads are widely applicable in various surface buffing and cleaning, such as metal derusting, glass and ceramic polishing, marble, automotive and wood floor polishing, etc..
Check Stock

SI FANG 10Pcs 4''x5/8'' Premium High Density Calcined Aluminum Oxide Flap Disc 60 Grit …

  • Premium high density calcined aluminum is characterized by hard-wearing,long life. The type 27 Abrasive grinding wheels are made with a fiberglass backing plate that effectively absorbs vibrations without smear during usage, bringing more stable and efficient grinding..
  • Designed for grinding, blending, sanding and finishing on a wide range of material. Especially suitable for stainless steel also great for mild steel. Flap discs sanding wheel are used to grind rough workpiece surfaces, fast grinding, such as valve castings, angle irons, steel plates, welds, weld scars, rust removal, deburring, etc..
  • Size:100mm x 16mm ,For use on an Angle Grinder.
  • Premium abrasive cloth provides up to 15 X longer life than fiber resin metal sanding discs. SI FANG 80 Grit grinder grinding discs have long-lasting use..
  • Ideal for The Home, Workshop, Hobbyists, Tradesmen, Builders and DIY Enthusiasts, etc..
Check Stock

Dynabrade 52633 5-Inch 127 mm Diameter Right Angle Depressed Center Wheel Grinder, 1.3 HP, 12000 RPM, Side Exhaust, 5/8-Inch - 11 Spindle Thread,Teal

  • 1.3 hp Depressed Center Wheel Grinder is ideal for fast weld and stock removal, heavy deburring, plus rust and scale removal.
  • Tool accepts optional 5-Inch (127 mm) diameter Type 27 Depressed Center Wheels with 7/8-Inch (22 mm) center hole.
  • Includes 25215 Wheel Guard, 25262 Backup Flange and 53696 Locking Flange.
  • Tool also accepts optional 5-Inch (127 mm) diameter Abrasive Flap Discs (flanging sold separately). Vibration Dampening Side Handle included.
Check Stock

Dynabrade 52632 4-1/2-Inch 114 mm Diameter Right Angle Depressed Center Wheel Grinder, 1.3 HP, 12000 RPM, Side Exhaust, 5/8-Inch 11 Spindle Thread

  • 1.3 hp Depressed Center Wheel Grinder is ideal for fast weld and stock removal, heavy deburring, plus rust and scale removal.
  • Tool accepts optional 4-1/2-Inch (114 mm) diameter Type 27 Depressed Center Wheels with 7/8-Inch (22 mm) center hole.
  • Includes 25212 Wheel Guard, 25262 Backup Flange and 53696 Locking Flange.
  • Tool also accepts optional 4-1/2-Inch (114 mm) diameter Abrasive Flap Discs (flanging sold separately). Vibration Dampening Side Handle included.
Check Stock

Mixiflor 50 Pack Abrasive Flap Wheel Sande,1\ x 1\ x 1/4\ Shank Mounted Flap Wheels,80 Grit Aluminum Oxide for Remove Rust and Weld Burr,1/4 Shank Fits All Drills

  • MOST COMMON SHANK SIZE: The 1/4 shank makes these abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die grinders..
  • METALWORKING APPLICATIONS: The mounted flap sanding wheels are commonly used in metalworking as a grinding or deburring wheel to clean up welds and cuts in iron, stainless steel and metal alloys. Also used for removing layers of rust and paint on flat metal surfaces..
  • WOODWORKING APPLICATIONS: Often used for flap sander wheels in woodworking for the stripping of old layers of paint when during resurfacing projects or sanding and finishing contoured wood surfaces..
  • PREMIUM MATERIALS: High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and long life to give you that premium performance that you need and expect from your tools..
  • VARIETY OF WHEEL SIZES: 50 Pack flap sanding wheels with 1/4 inch Shaft, 1 inch Thickness and 1 inch Outer Diameter..
Check Stock

Strip Disc Stripping Wheel for Angle Grinders Rust Remover Disc Remove Rust Paint Oxidation - Paint Stripping Wheel, Disc Stripping Wheel, Paint Stripping Disk 4\ x 5/8\ 10 Pack

  • ◼️【TOP-LEVEL MATERIAL-Stripping Discs Angle Grinder】: The angle grinder paint stripping wheel, Rust Stripping Wheel is made of high-strength wear-resistant fiber mesh as the base material, wear-resistant materials, long service life and the resin elastomer and diamond sand are organically combined with a special process..
  • ◼️【WIDELY APPLICABLE】: Rust remover wheel, brand new 10-piece set, specially designed for 4" and 5/8" spindle marking of various angle grinders on the market. Easy to strip discs clean & remove paint, rust and oxidation. The purple paint stripping wheel has better hardness than the black strip wheel grinder..
  • ◼️【STRIPPER DISC--PREMIUM PERFORMANCE】: Grinder stripping disc is suitable for various shapes to be peeled off by the grinding body, It does not damage the surface of the object, has uniform grinding force, dirt will not block the grinding surface. Strip wheel grinder wear resistance, strong water resistance, strong plasticity, and good softness..
  • ◼️【BEST MATCH SIZE--STRIP DISC】: Size of the angle grinder rust remover disc: Diameter 4.
Check Stock

DEWALT Die Grinder, 1-1/2-Inch (DWE4887)

  • 4.2 amp, 25,000 rpm motor of the die grinder provides high power and speed for all 1-1/2-inch grinding applications.
  • AC/DC capacity pf the electric die grinder works off welding machines and generators for increased productivity and versatility.
  • DEWALT die grinder has a convenient paddle switch with lock-on button for easy gripping.
  • Precision 1/4-inch collet securely holds all proper accessories (1/8-inch reducing sleeve as optional accessory).
  • 4.2 Amp, 25,000 rpm motor provides high power and speed for all 1-1/2" grinding applications.
  • AC/DC capacity works off welding machines and generators.
  • Paddle switch with lock-on button for easy gripping.
  • Precision 1/4" collet securely holds all proper accessories (1/8" reducing sleeve as optional accessory).
Check Stock

J.W. Winco 100KNA1 Wheel, Forged Tempered Steel, Surface Lightly Oiled

  • ...heel is crowned to ensure the belt don't jump off the wheel..
  • 【3" Tracking & 2" Idler Wheel】The heavy duty bearings fitted back to back in each wheel for max bearings life. And there is a spacer between the bearings to prevent over-tightening..
  • 【Simple Installation】Easy and reliable mounting method. This belt grinder wheel set is easy to carry and use with small and lightweight. The bearings can be easily replaced when worn. The knife grinder wheel set can meet your needs and work great in grinding metals, wood, acrylic and other materials. It is widely used in parts factories, building materials factories, etc., perfect for tool polishing..
  • 【Superior Material】The belt grinder wheel is made from top quality Aluminum, warp-proof, impact resistance, sturdy and durable. High precision and hardness ensure long-term reliable service..
  • 【100% Satisfaction Guarantee】If you're not satisfied with this Belt Grinder 2x72 Wheel Set, simply return it for a full refund in 30 days. While you have any questions about our products, please feel free to contact us and we will provide the best service. Always buy confidently in Bonbo!.
Check Stock

Benchmark Abrasives 3\ Quick Change Zirconia Flap Discs - 10 Pack (40 Grit)

  • QUANTITY: This is a pack of 10 premium zirconia quick change flap discs..
  • DIMENSIONS: 3" Diameter with a Male R-Type backing pad.
  • APPLICATIONS: Zirconia discs provide a very good cut rate to cost ratio. They are the go-to choice on carbon/mild steel applications. You can also use them on stainless steel, aluminum and other alloys..
  • USE: Our QC discs are made for use on a die grinder and should be only be used with the proper mandrel. 3" discs should be used with a 3 inch mandrel..
  • INFO: Our discs are made with a special, self-sharpening zirconia grain that are designed for aggressive stock removal, enhanced surface quality and long life..
Check Stock

DEWALT Die Grinder with No Lock-On, Brushless, Variable Speed, Paddle Switch, 2-Inch (DWE4997NVS)

  • Brushless motor for long motor life and no brush changes for the die grinder.
  • The electric die grinder features no-load speed of 7500 to 25000 RPM for speed range during all types of applications.
  • Spindle lock button of the DEWALT die grinder is made for quick accessory change.
  • Precision 1/4-inch collet with 1/8-inch reducing sleeve for gripping strength, allowing user to operate both 1/4-inch and 1/8-inch shaft accessories.
  • AC/DC capacity works off welding machines and generators for productivity and versatility.
Check Stock