5\ EXTENSION PNEUMATIC POWER POWERED EXTENDED LONG SHAFT AIR DIE GRINDER TOOL
1/4” Air straight Die grinder-This air die grinder features a straight head, equipped with a 1/4” collet and a 1/8” collet, which could hold a variety of grinding bits, ideal for all kinds of materials. This pneumatic die grinder has a special latch attached to the trigger mechanism that acts as a child safety lock to prevent the tool from accidentally starting up. Note: Please remove the DUST PLUG before insert the air connector..
Light-Weight & Ergonomic Designed Body - The air die grinder features a slim design and has a lightweight (0.72 lbs) but durable and solid body, comfortable to maneuver and perfect for one-handed grip. The ergonomically designed body is comfortable to hold for long work sessions..
High Free Speed - The Pneumatic straight die grinder operates at a maximum speed of 25,000 RPM continuous power with an air compressor, which allows for precision cutting, grinding, shaping, and sanding. Operating pressure: 90psi (6.3bar). Air consumption: 85.5l/min (3cfm). Note: Use sealant tape to avoid air leakage..
Rear Exhaust - A rear exhaust makes the lower sound level possible, while also ensuring that the exhaust isn't hitting the operator in the face. The air inlet filter could keep the die grinder from contamination. Note: Add oil r....
LOUDERLUN Bead Roller Forming Set 9 Dies 1 Polyurethane Roll Tipping 22mm shaft
Includes 9 steel dies and 1 polyurethane lower wheel.
Hem edges, create offsets and flanges, form style lines, contours and channels.
Kit includes the following: Polyurethane Lower Wheel, 180 degree lower die, Inside offset die , Outside offset die , Knife edge tipping die , Lower....
Century Drill & Tool 92913 Rethreading Die, 5/8-11NC
【Round Die】- Thread size: M6 x 1.0mm.
Fine grinding. Made of alloy steel, hardness and wear-resistance for long service life..
【Application】- Round dies are suitable for general purpose threading. Can process, correct or clean the external threads. Ideal for maintenance and repair work..
【Features】- Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic..
【Easy To Use】- The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
【Tips】- It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread..
ConnectoRF Quick Interchangeable Ratchet Crimping Tool Kit with Plastic Case for Insulated & Non-insulated Wire Terminals Crimper With 5 Die Sets
7pcs heavy duty ergo design interchangeable crimping tool kit for wire terminals, including one frame, 5 die sets for various applications, and one heavy duty plastic case..
Easy "push-to-release" tool frame. No extra tools are needed to change dies..
Die set#1 (HT-42C) For Non-insulated Terminals or Open Barrel Terminals AWG 20-18/ 16-14/ 12-10.
DIN 0.5-1/ 1.5-2.5/ 4-6 mm². Die set#2 (HT-42C3) For D-Sub Terminals AWG 24-30/ 18-22.
Die set#3 (HT-42E2) For Pin Terminals Insulated or Non-insulated Ferrules AWG 20/18/16/14/12/10/8/6.
DIN 0.5/0.75/1.0/1.5/2.5/4/6/10/16 mm². Die set#4 (HT-42H) For Insulated Terminals AWG 20-18/ 16-14/ 12-10.
Die set#5 (HT-42N) For Non-insulated Terminals AWG 18-16/ 14/ 12-10/ 8.
...entire process. A must-have for the reloading enthusiast.
Strong Angled Frame – The Lock-N-Load Classic has a high strength, uniquely angled alloy machine frame delivers both dependability and precision. Also offers greater visibility and easier access to the cartridge.
Quick and Easy – Designed to assure perfect die and shell holder alignment, its Lock-N-Load quick change bushing system also makes the process quick and easy. Switch from one die to another in a matter of seconds. Quickly remove and re-install without the need to readjust the die or keep a separate seater die for each of your pet loads.
Easy Grip Handle – The large, ball-style handle reduces fatigue. The long handle increases leverage and reduce effort. The Power-Pac linkage and solid steel arm multiplies the leverage you apply to the handle, making is easier to size cases and reduces fatigue.
How to Use – Simply set the die and tighten the Sure-Loc ring on the Lock-N-Load bushing. Quickly remove and re-install without the need to readjust the die or keep a separate seater die for each of your pet loads. Dies, bushings, and shellholders sold separately..