Best Diesel Emission Fluids

Lamerto 2.2 12V DEF Pump Urea Pump 4387304RX Replacement for Cumm-ins ISX ISB ISC Denoxtronic Diesel Exhaust Fluid Pump #A028Y792 2871879-RX

  • Cumm-ins ISC Series, with Denoxtronic 2.2 Control Unit Doser Pump.
  • Diesel Exhaust Fluid (DEF) Urea Pump systems are designed to safely and effectively transfer DEF fluid from a tank to diesel equipment, helping facilities comply with strict NOx emission regulations..
  • Urea pump provides a stable and flow rate for the urea system. In addition of providing stable pressure and flow, it also has heating and venting functions. If the urea pump fails, the power output will be limited, the urea solution will not be injected into the exhaust. This will affect the car performance..
  • Our urea pump is a drive unitl that provides a stable and flow rate for the urea system.In addition of providing stable pressure and flow,it also has heating and venting functions?Make noise and current consumption very low and 20% higher efficiency than conventional fuel pumps..
Check Stock

EVIL ENERGY 3/8 Fuel Hose Line Push Lock NBR Rubber SAE 30R7 25FT 300PSI

  • Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 3.9inch(100mm)..
  • Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc..
  • Application: SAE 30R7 rubber fuel line widely used in fuel system,oil cooling,steam emission,please check the pressure of application before perchase..
  • EVIL ENERGY provide 25ft 3/8inch fuel hose 3-month warranty.Any problem you might have,please feel free to contact us via Amazon message..
Check Stock

Air-Operated Double Diaphragm Pump,QBK-25L Aluminum Alloy 1 inch Inlet Outlet USA Stock

  • Made of aluminum alloy, it is sturdy and durable. Working pressure is 29 to 115 PSI..
  • 24 GPM pneumatic double diaphragm pump with 1 inch inlet and outlet..
  • Capable of pumping up to 24 gallons per minute at temperatures up to 80 degrees Fahrenheit..
  • Suitable for use with water. Suitable for low viscosity petroleum fluids including diesel, kerosene, engine oil and some used oils..
  • Note: Cannot be used for corrosive liquids..
Check Stock

1/2 Stainless Steel Electric Solenoid Valve 12V DC Normally Closed

  • Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, corrosion resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes....
Check Stock

1 Stainless Steel Electric Solenoid Valve 110VAC Normally Closed Air Water

  • Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARR....
Check Stock

1/2 Stainless Steel Electric Solenoid Valve 110V AC Normally Closed VITON

  • Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, corrosion resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes....
Check Stock

3/4 Stainless Steel Electric Solenoid Valve 110VAC Normally Closed Air Water

  • Constructed with industrial grade stainless steel, this valve is very durable and resilient, leak resistant, and optimal for higher pressure and temperature projects. It can be used with drinking water or other water projects, gasoline, diesel fuel, kerosene oil, natural gas, air etc..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valves..
  • As with all U.S. SOLID products, this valve comes with a ONE YEAR WARR....
Check Stock

1/4\ Brass Electric Solenoid Valve 110VAC Normally Closed VITON

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

1 Brass Electric Solenoid Valve 110VAC Normally Closed Water Diesel.

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

HIAORS Gas Fuel Filter Hose Tube Line for Chinese GY6 50cc 150cc 139QMB 157QMJ Tao Tao Scooter ATV Motorcycle Parts

  • ...outer pipe are made of rubber. Wall thickness is 3mm. Oil resistant, cold-resistant and ethanol tolerance. 9.8 Foot / 3m hose can be cut to size for all your applications..
  • 【Super Durability】The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance.
  • For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control. Custom Extra long 9.8 Foot Length (3M) can be cut to size for all your applications..
  • 【Perfect Application】The parts work fine in replacing the whole fuel line on your old lawn tractor. It works fine and is very eazy to install. You can use a little soapy water on the tubing to push it onto the filter and onto the gas tank. Make sure the little metal spring clips are on the tubing a little further down than the lenght of filter ends..
  • 【Wide Application】Compatible with Briggs & Stratton, Kohler, Craftsman, Simpson, Kawasaki, Husqvarna, Oregon, Stens, Gravley, John Deere, Kubota engines that designed for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors motorcycle snow blowers dirt bikes and just about all small engines..
  • 【Upgraded Set】The HIDARS Package includes 9.8 Foot 1/4" ID Fuel Line.
  • 20 x 1/3" ID Hose Clamps. Hose Clamps are made of 65Mn Spring Steel, durable an....
Check Stock