Dixell XR02CX-5N0C1 230V/50-60Hz Digital Thermostat Controller Defrost Programmable-Commercial for Fridges Freezers Heating Appliances
XR02CX-5N0C1,in 32x74x50 mm short format,is a digital controller with off cycle defrost designed for refrigeration applications at normal temperature.It provides a relay output to drive the compressor. It is also provided with 1 NTC probe input and one the digital input. The instrument is fully configurable through special parameters that can be easily programmed through the keyboard or by the HOTKEY..
Suitable for appliances including:FRIDGES,FREEZERS,HEATING APPLIANCES.230V/50-60Hz.
SAFETY PRECAUTIONS Check the supply voltage is correct before connecting the instrument. Do not expose to water or moisture: use the controller only within the operating limits avoiding sudden temperature changes with high atmospheric humidity to prevent formation of condensation. Warning: disconnect all electrical connections before any kind of maintenance. Fit the probe where it is not accessible by the End User. The instrument must not be opened..
In case of failure or faulty operation send the instrument back to the distributor or to Dixell S.r.l.(see address) with a detailed description of the fault. Consider the maximum current which can be applied to each relay (see Technical Data). Ensure that the wires for probes, loads and the power supply are separated and ....
YXMY2020 Benchtop Digital Resistance Tester AT527 AC Low ohm Meter Battery Internal Resistance Meter for Testing Various Electronic Components
This instrument can test 0.0001mΩ~3.3kΩ resistance, 0.00001V~400.000V DC voltage, maximum resistance 33000 display digits, and maximum voltage 800000 display digits. The AT527/527B combines high-precision, high-resolution and ultra-high-speed measurement with 0.5% resistance accuracy and 0.01% voltage accuracy up to 70 times per second..
The instrument is used for professional sorting function, standard Handler (PLC) interface, separate output resistance HIGH / IN / LOW signal and voltage HIGH / IN / LOW signal, can fully cope with high-speed automatic sorting system to complete the automatic pipeline test, At the same time, the enhanced IO signal can directly drive the power relay and signal relay..
The instrument has built-in RS-232C interface and USB-232 interface. The instrument is equipped with universal data acquisition software, comes with database function and Excel..
The export function can be effectively applied to remote control and data acquisition and analysis..
ANMBEST 2PCS 4 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino
It is 4 Channel Isolated 5V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient..
Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A.
RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move.
With optical coupling isolation, triggering more reliable, more stable..
EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation..
High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper..
2pcs STC-1000 Digital Temperature Controller DC 12V 10A Digital LED Temperature Controller Thermostat Control Switch 2 Relay Output Cooling Heating and NTC Sensor Probe
【STC-1000 Digital Temperature Controller】Temperature Control Range: -50℃~99℃. Control Accuracy: ±1℃. Control temperature by setting the temperature setting value and the difference value.
Temperature calibration. Easy operation, to set start temperature, stop temperature, corrected temperature correction, delay start..
【STC 1000 Digital Thermostat】This STC-1000 digital dual relay thermostat is made of ABS flame retardant shell, a variety of fields perfect use, convenient operation and practical settings..
【Heating and Cooling Function】Two work mode: Heating ( start temperature is less than stop temperature).
Cooling ( start temperature is above than stop temperature). Refrigerating contro, output delay protection..
【NTC Waterproof Sensor Probe】Digital temperature controller 12V is equipped with 1M waterproof probe, can be used in moisture and water environment, you can use it in home brewing, fridge, incubation, fermentation, seedling heat mat, accelerating germination..
【Package Contains】2 Pack STC-1000 temperature controller thermostat control switch 2 relay output cooling heating and ntc 10k thermistor sensors temperature probe. (Please kindly note no outlets, wirring needed.
bayite Temperature Controller BTC201 10A Dual Pre-Wired Digital Outlet Thermostat Plug, 2 Stage Heating and Cooling Mode, 110V - 240V, Fermentation BBQ Reptile Aquarium
Simplified Design---Plug and play, easy to set. Support °C/°F display.
Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1100W(110V).
Dual Display Window---Be able to display real-time temperature and set temperature at the same time..
Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration.
Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C).
bayite Temperature Controller 1650W 15A BTC211 Dual Digital Outlet Thermostat Plug Pre-Wired 2 Stage Heating and Cooling Mode 110V - 240V Fermentation BBQ Reptile Aquarium
Simplified Design---Plug and play, easy to set. Support °C/°F display..
Dual Relay Output---Be able to connect with cooling and heating equipment at the same time. Maximum output load: 1650W(110V).
Dual Display Window---Be able to display real-time temperature and set temperature at the same time..
Safe Protection---High and low temperature alarms are available when the temperature overshoots your desired temperature. Compressor delay protection time setting and Temperature calibration.
Warranty---1 year warranty for replacement or full refund without return. Comes with a 3m(9.8ft) waterproof probe sensor. Measure range is -58 ~ 230°F(-50 ~ 110°C).
Mirkit x Baofeng Radio UV-5R MK3X 5 Watt FCC Approved 2022 2100 mAh Li-ion Battery, Tri-Band Radio Mirkit Edition and Neck Strap Lanyard Mirkit Ham Radio Operator
What Makes the UV-25X4 Unique: Dual Synchronize Display Mode, Mic Audio Gain Settings, In depth user's guide, Auto Power Off Function, Channel Mode Editing Settings, Auto Scan, Scanning Resume, and Variable Frequency Scanning, Quad Watch Delay Time, Randomization Privacy Mode, Builds upon previous generation UV-2501+220.
Frequency Range: 144-148MHz (VHF), 222-225MHz (1.25M), 420-450MHz (UHF).
Broad (Wide) / Narrowband (Narrow) Selectable.
Recommended Accessories: Pair UV-25X4 with the Nagoya TB-320A Antenna (and RB-50 Magnetic Mount) for easy installation. The PC04 FTDI Cable is recommended for easy computer programming.
Dual Watch monitoring VHF/UHF and 220Mhz: The 220 MHz band antenna lowpass filter is switched with a relay and the 2 meter lowpass filter and 70 cm highpass filters are switched with PIN diodes - resulting in a audible relay switch noise when monitoring 220MHz with VHF/UHF simultaneously. A relay that completely isolated the 220 MHz RF filter won't impact the RF performance of the 2 meter/70 cm bands. If monitoring multiple 220MHz or VHF/UHF simultaneously the relay is not heard or used..
Tribander Mobile Radio Kit Includes: BTECH UV-25X4, Speaker Mic, 6 foot DC Cable with Cigarette Plug Connector, Ra....
