Best Digital Gas Flow Meter

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

  • FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
  • MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
  • HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
  • INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
  • MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..
Check Stock

Bestarc Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Argon Gas Welding AGR-2

  • Argon / CO2 regulator and flow meter, suitable for most argon tanks, argon hose for Miller, Lincoln, Hobart, HTP, and most other welders.
  • The material of body is quality brass. Sturdy and durable.
  • Easy to use, gas regulator can be directly screwed into argon or argon / CO2 tank, ideal choice for MIG TIG welding, chemical and electronics industry.
  • Accurate to read, pressure gauge reads from 0 - 3500 PSI, and the square flow tube reads from 0-25 CFH.
  • We provide high quality products at fair price, one year warranty, professional after-sales service.
Check Stock

MEANLIN MEASURE Argon Regulator Flow Meter with 6.5 Feet Hose,CGA580 Inlet Connection,5/8' x 18RH Outlet Fitting,Dual Output Argon Welding Flowmeter for TIG MIG Welder

  • 【Easy to Read】2″ gauges for easy reading. Makes adjusting your pressure values a piece of cake..
  • 【CGA-580 Inlet】This Gas Pressure Regulator Can Be Used with Argon, Helium and CO2 Gas Tanks,Ideal for MIG and TIG welding applications..
  • 【Accurate Measurement】This Gauge measuring range 0-4500PSI,It has a highly sensitive pointer to sense the pressure in the pressure tank,so it is more reliable than the flow-gauge style..
  • 【Excellent Quality】Our Double Dutput Argon Regulator Is Made Of Brass For High Strength, Toughness And Corrosion Resistance For Long Term Use..
  • 【Package Include】1*Argon Regulator Flow Meter 1* 6.5Feet Hose 2*Male 5/”8 UNF-18RH Fitting 2*1/4″ Hose Barb Adapter 2*Female 9/16″x18 Nut.
Check Stock

VIVOSUN Argon/CO2 Regulator Emitter System with 50 PSI Fixed Max 4000PSI Inlet Pressure Precise Brass Regulator for Gas Control in Hydroponic Grow Tent House Aquarium Welding

  • Durable Material: This regulator’s body is made of high-quality brass, which has high strength, high toughness and corrosion resistance, and strictly tested to ensure long -term use.
  • Precise Control and Measurement: This regulator equipped with a flow meter and pressure gauge.
  • Output flow is indicated by a ball in the flow tube and is adjustable from 10 to 60 SCFH.
  • The pressure gauge ranges from 0 to 4000 PSI and is used to read the amount of gas remaining in the tank.
  • CGA-580 Tank Inlet: The regulator fits standard Argon and CO2 gas tanks with CGA-580 inlet connection, and has a unique filter port design on the CGA-580 mounting port.
  • Two Connection Ways: There are female 5/8" x 18 outlet nut and a standard 1/4" barb adapter, you can choose the connection method of the hose according to your needs.
  • Multiple Applications: Suitable for indoor grow rooms, grow tents, greenhouses and hydroponics to increase CO2 in the growth environment for optimal growth.
  • And ideal for MIG TIG welding, chemical, and electronics industries.
Check Stock

CGOLDENWALL Handheld Ultrasonic Flowmeter Clamp on Flow Meter Portable Liquid Flow Meter with  S1+M2 Transducers for Copper/PVC Pipe DN15-700mm 1/2-28\ ((Old or New Panel))

  • S1+M2 TRANSDUCERS: Easy to setup the transducers on the pipe and enter the required information in the control unit.No need to destroy the pipeline and stop production during the measurement process.S1(DN15-100mm, 1/2-4"), M2(DN50-700mm, 2-28").
  • DIGITAL DISPLAY: The Ultrasonic Flowmeter can display cumulative flow, instantaneous flow, velocity, and working status at the same time. Accuracy: 1%, linearity: 0.50%, repeatability: 0.20% accuracy: ±1%, calibration certs included. Note: In order to provide a better user experience, we upgraded the product label. The product you received may be the old version or the new version.
  • DATA STORAGE AND OUTPUT: This Ultrasonic Flow Meter has a built-in data logger, which can store up to 2000 lines of measurement data. And you can download the logged data onto PC through the RS232 interface..
  • LONG STAND TIME: This Flow Meter is equipped with a built-in high-capacity rechargeable battery, which can support the flowmeter to work continuously for up to 12 hours..
  • WIDE APPLICATION: Come with S1+M2 transducers, and the measuring range is DN15-700mm, 1/2-28". It can work on Copper pipe, PVC pipe to detect the flow of liquids such as sea water, alcohol, river water, industrial sewage, lubricating oil, diesel, fuel oil, etc.N....
Check Stock

CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)

  • FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
  • TECHNICAL PARAMETERS:① diameter of water inlet: 32mm.
  • ③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
  • ⑥ max temp of tested liquid: 158°F/70°C.
  • MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
  • NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
  • WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..
Check Stock

GasSaf Propane Tank Gas Gauge Leak Detector - Universal for QCC1 Type1 Propane Tank Gas Pressure Meter(2-PCS)

  • 1.Compatible with all appliances with a QCC1 / Type1 connection 20 lb to 40 lb propane tanks.
  • 2.Monitors fuel level without removing the tank. color coded dial for allowing you to see at a glance when your propane level is low,here are three levels.
  • 3.With leak detection function, if the leak is detected, the instrument will limit the flow to protect your safety.
  • 4.High precision meter , high quality brass, can perfectly provide oven, oirtight connection between RV and tank, very durable and sturdy..
  • 5.Coming with dust cover. No tools required and easy to install with handheel grip for tightening. Great for using gas grill, heater, smoker, camp stove, lantern, tabletop grill, fire pit table, turkey fryer and more propane appliances..
Check Stock

GasSaf Propane Tank Gas Gauge Leak Detector - Universal for QCC1 Type1 Propane Tank Gas Pressure Meter

  • 【Connection Method】:Compatible with all appliances with a QCC1 / Type1 connection 5 lb to 40 lb propane tanks.
  • 【Color Dial】:Monitors fuel level without removing the tank. color coded dial for allowing you to see at a glance when your propane level is low,here are three levels.
  • 【Safe and Reliable】:With leak detection function, if the leak is detected, the instrument will limit the flow to protect your safety.
  • 【Strong and Sturdy】:High precision meter , high quality brass, can perfectly provide oven, oirtight connection between RV and tank, very durable and sturdy..
  • 【Easy to Install】:Coming with dust cover. No tools required and easy to install with handheel grip for tightening. Great for using gas grill, heater, smoker, camp stove, lantern, tabletop grill, fire pit table, turkey fryer and more propane appliances..
Check Stock

RX WELD Air Acetylene Torch Kit Fuel Gas kit Professional Series

  • ...e operator can change the flame length according to his exact requirements by adjusting the oxygen and gas valves on the torch body..
  • 【Safe & Easy to Operate】 The acetylene torch kit control adjustments are easy to operate, making your welding job so much easier. The Oxygen & Acetylene regulator includes 2.5" diameter gauges to display accurate pressure, so you can easily adjust your gas flow rate with the built -in flow meter. The built-in check valves eliminate the reverse flow of gases, increasing safety..
  • 【Multiple Applications】 The torch kit is easy to handle and can be used in a wide range of fields. This welding torch tool set is a great choice for both an amateur metalworker or a professional. It's perfect for a multitude of applications such as farm, ranch, hobby metal store, construction site, automotive, refrigeration, light fabrication and repair..
  • 【Portable Welding Tool kit】 The complete welding and cutting torch tool set includes 1 x oxygen regulator, 1 x acetylene regulator, 1 x torch handle, 1x cutting attachment, 1 x goggles, 1 x rosebud heating tip, 3 x welding tips, 1 x twin hose and 1 x carrying case. It is easy to carry and is basically free from use restrictions..
Check Stock

RV On-Demand Tankless Hot Water Heater

  • Hot Water, Anywhere - 65,000 BTU output for on-demand hot water no matter where you are.
  • Maximum Flow - Patented technology for the best flow rate.
  • Performance - 2.8 L/Min minimum flow for ignition.
  • Remote Control - Wireless digital remote for precise control.
  • Advanced Safety - carbon monoxide and propane leak censors.
  • Temperature Protection - Anti-Scald and Anti-Cold systems for better user safety.
  • Retrofit ready - Perfect for replacing tanked or tankless models.
Check Stock