TPI 135 Manual-Ranging, Average-Sensing Digital Multimeter with Protective Boot, 750VAC, 1000VDC, 10 Amp, 40 Megaohms, 20,000 Microfarads
Digital multimeter measures voltage, current, resistance, and capacitance.
Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has an undistorted waveform.
Audible continuity sensor confirms a circuit conducts electricity, and diode test detects proper functioning of a circuit’s diodes.
Hold function keeps a reading on the LCD, even after the meter is disconnected.
Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category II installations up to 1,000V and Category III installations up to 600V.
【Manual & Auto Dual Ranging Integrated Design】 If you need a more precise values, you can choose manual mode. If you want to easily obtain measurement results, you can choose automatic mode..
【Triple Protection】 Overload protection function: when the access voltage is lower than 250V, the digital voltage meter will automatically prevent burnout during the entire process.
Fuse Disconnect function: when the current is too large, the two fuses will immediately blow to protect the motherboard, prompt "FUSE" on the screen and beep alarm.
Wrong Polarity Alarm function: when the gear position and the test leads access port do not match, the volt meter's screen will display "LEAD" and beep..
【Large inverted EBTN LCD Display, Easy to Read】 Negative contrast - the number values are white against a black background instead of the other way around, and the whole screen is lit. (PLEASE NOTE: It's not recommended to use the meter under strong outdoor light. It may be not clear enough to read.).
AstroAI TRMS 6000 Counts Multimeter with Large Backlit Display + 4000 Counts Auto-ranging Digital Clamp Meter
Multifunctional - Accurately measures AC/DC Current, AC/DC Voltage, Continuity, Resistance, Capacitance, Frequency and Diode.
Easy to read - The LCD Backlit Screen make it easy to use in a dark working area. It is often easier to use the data hold function to freeze the data being displayed on the digital display..
Suitable For Many Occasions - This Multimeter is a golden partner to help to troubleshoot a variety of automotive and household electrical problems safely and accurately..
Non-contact Voltage Testing - This Clamp Meter features non-contact voltage testing with sound and light alarms. When the Meter senses a weak AC signal, the green indicator light will come on and the buzzer will emit a slow, audible beep. when the Meter senses a strong AC signal, the red indicator light will come on and the buzzer will emit a brief beep.
Ensure Safety - Double ceramic fuse is anti-burn and protects from overloading，and it will be more secure and reliable.
Digital multimeter measures AC/DC voltage, current, frequency, resistance, and capacitance, and performs continuity and diode tests.
Average-responding, RMS-indicating meter provides correct readings for linear loads such as induction motors, resistive heaters, and incandescent lights.
Min./Max. average recording with Min./Max. alert to capture variations automatically.
Analog bar graph for fast changing or unstable signals.
Safety rated for Category III to 1,000V and Category IV to 600V.
AstroAI 8Pcs Multimeter Test Leads Kit,Digital Multimeter Leads with Alligator Clips and Plunger Test Mini Hooks Test Probes 1000V 10A CAT III & CAT IV 600V for Multimeter, Voltmeter, Clamp Meter
MULTIMETER TEST LEADS KIT: All 8 pieces with three different connectors help to test various on different occasions, including 2 X alligator clips with removable insulation, 2 X extended range plunger mini-hooks with pass-through banana plugs, 2 X heavy duty test probes, 2 X 42” lead extensions..
HEAVY DUTY: It is safer to test CAT III 1000V &CAT IV 600V rated current 10A current, perfectly fitting all kinds of multimeters like digital multimeters, voltmeter, clamp meters and so on..
COMPATIBLE: Multimeter test leads are designed for use with any multimeter, clamp meter,voltmeter or test instrument.Universally compatible with either 0.16” banana plugs or shrouded banana plugs on all ends..
HUMANIZED DESIGN: Removeable PVC insulation on the alligator clips protect it against dust and oxidation.Thin and sharp testing probes for easier use with very tight spaces. Longer probe tips for greater ease of use..
VERSATILE KIT:Soft and Durable Hand Grips, Heat,and cold-resistant test probes are silicone insulated and provides comfort and safety.All test leads complies with IEC/EN: 61010 standards..
Customer Service: KAIWEETS provides a lifetime after sale service and technical support. This digital multimeter is included with 2 AAA batteries....
Multi-Function: This multimeter can test AC/DC Voltage, DC current (Can not for AC current), Resistance, Continuity, Diode Measurement..
Sensitive Test: Please make sure the rotary switch is located at the right test range. Data hold function, backlight function helps you test clearly....
Safety Operation: IEC Rated CAT III 600V, CE and RoHS certified. Anti-Burn with double fuses. This multimeter has overload protection on all ranges..
Widely Used: The Digital Multimeter is designed to be safe and accurate, and suitable for electrician test, household use, automotive, industrial....
HILTEX 40508 Digital Multimeter | Diode and Transistor Tester | AC/DC Volt Test | Audible Continuity | Test Probes | Voltmeter | Multitester Meter |Volt/OHM Meter (VOM) | Measure Voltage Test
METER TESTER: A portable, general purpose digital volt meter multimeter to test wires, batteries, cells, fuses and other electrical components..
VOLTAGE TESTER: A safe and accurate voltage and current tester for troubleshooting electrical problems in automotive and household settings. Check for battery quality, automotive circuits, and charging systems..
LARGE DISPLAY: Includes large, easy-to-read LCD screen that measures 3-1/2 digits and accurately measures resistance, current and voltage with maximum reading up to 1999..
TEST LEADS: Red and black leads to test electrical system components including diodes, transistors, wires, fuses, and battery testing on electrical equipment..
ENSURE SAFETY: Built-in overload protector keeps the meter from any possible damage, Checks continuity of wires, fuses, and electrical components. Overload indicator and low battery indicator..
DROK USB Tester, USB-A USB-C 2.0 Multimeter Dual USB Ports PD QC 3.0 with Color LED Display Battery Charger Monitor, 7 Modes Capacity Voltage Current Power for Laptop Power Bank Phone Solar Panel
【7 Modes Display Monitor】 DROK USB Tester is equipped with digital color LED display screen, which can be switched between 7 display modes. This multimeter can be used to measure voltage, current, power, capacity. Through the 7 modes, you can clearly see the voltage, current, capacity and power during charging. Only one button to switch the display mode, simple and handy..
【Dual USB Output】 This item is equipped with USB-A USB-C input and dual USB 2.0 output. The output ports support PD QC 3.0 fast charge protocol. This meter can auto identify the fast charge protocol, which can charge your mobile device among 3.6V to 12V 3A. Output Ⅰ can be used for device charging and data transfer, and output Ⅱ can only be used for charging..
【Multifunction】 DROK USB detector can be used for capacity checking, capacity clear, over voltage, under voltage, over current and short circuit alarm, which is easy to test the power, quality and know the health condition of your device chargers or USB cables..
【Easy to Use】 The multimeter only has Two button. Once you plug in the meter, you can test the parameter you want. The button Ⅱ can switch 7 modes display——VA(Voltage & Current), C(Capacity), P(Power), VA+C, VA+P, C+P, VA+C+P. When voltage ≥ 5....
UT136B Multimeter Resistance Tester Voltmeter Digital Ohmmeter Voltage Tester Measures Current, Resistance, Frequency; Tests Diodes, Temperature
【Diode Tester】Our diode Test meter maximum display 3999, support diode and triode test function, support NCV function.
【Auto Range 】UT136B+ automatic range digital multimeter with capacitor and frequency for easy operation.
【Safety Operation】Safety level CAT II 1000V, CAT II 600V, passed the 1m drop test. Voltmeter can measure AC and DC voltages up to 1000V and can measure currents up to 10A (20A at 30S measurement time).
【Protection】Full featured mis test protection, can withstand 1kV voltage shock, and is more convenient to use.
【Multifunction Test】Support on off test, data hold, auto power off, low voltage display and screen backlight.
