Best Digital Motor Driver

Milwaukee 2667-22 M18 2-Speed 1/4" Right Angle Impact Driver 2XC Kit

  • EVERYTHING YOU NEED TO STAR - Begin your projects right away with this right angle impact driver set that includes a PWR CORE 12 2.0Ah Lithium Battery and PWR JUMP Charger..
  • COMPACT SIZE - The digital brushless motor provides compact lightweight power..
  • LONGER RUN TIME & BATTERY LIFE - Industry leading PWR CORE 12 lithium battery technology wraps each cell with cooling material to keep the battery powering on for 25% longer run time and 2X battery life..
  • POWER ON THE GO - Plug in to the battery's USB port wherever whenever with PWR ASSIST mobile charging..
  • CHARGES IN 5 MINUTES - PWR JUMP charges the battery from 0% to 25% in just 5 minutes or 100% battery in 45 minutes..
Check Stock

AC Rear Blower Motor Transistor Resistor For Honda Pilot 2003-2008 Acura MDX 2001-2006 Part# 79330-S3V-A51 79330S3VA51

  • ... operation of the entire heating and air conditioning system..
  • The HVAC blower motor resistor or BMR for short, controls the speed of vehicle's blower motor. A malfunctioning blower motor resistor will cause a poor cabin cooling or heating condition. It can also cause poor windshield defrosting or de-icing, reducing driver visibility. This blower motor resistor is in the panel under the shift lever beside the driver's side. Easily install with some simple tools..
Check Stock

Large Current 50A H-Bridge High-Power Single-Channel Motor Driver Module Semiconductor Refrigeration

  • 【H-bridge Driver Module】The drive uses a full H-bridge driver module full-bridge MOSFET driver chip and composed with very low internal resistance and high current. MOSFET H-bridge driver circuit, with strong drive and braking effect, signal isolation chip isolates motor drive effectively..
  • 【Effective Protection】With the microcontroller PWM signal isolation, effectively protect microcontroller..
  • 【Input Maximum】To achieve the motor forward and reverse rotation, two PWM input maximum 200kHz frequency..
  • 【Fully Compatible】Power indicator is schematically clear. The power supply voltage 5V to 15V. 3.3V to 12V, PWM level is fully compatible. High current 50A..
  • 【Warm Tips】Ffor your safety and protection of use, our product is tested to ensure trouble-free installation and performance, please rest assured to buy..
Check Stock

BOSCH GXL18V-601B25 18V 6-Tool Combo Kit with 2-in-1 Bit\\/Socket Impact Driver, Hammer Drill\\/Driver, Reciprocating Saw, Circular Saw, Angle Grinder, Floodlight and (2) CORE18V 4.0 Ah Compact Batteries

  • CONVENIENT 18V 6-TOOL COMBO KIT: Has 2-In-1 Bit/Socket Impact Driver, Hammer Drill/Driver, Recip Saw, Circular Saw, 6-1/2 In. Circular Saw Blade, Angle Grinder, Floodlight, (2) CORE18V 4.0 Ah Batteries, 18V Charger, Belt Clips, Carrying Bags.
  • HALF DRIVER, HALF WRENCH: Has a 1/4 In. quick-change hex shank and a 1/2 In. square drive, for using either bits or sockets.
  • POWERFUL IMPACT DRIVER MOTOR: Delivers a max of 1,800 In.-Lbs. of torque and up to 4,200 ipm for professional power.
  • IMPACT DRIVER: Eliminates using socket adapters, while transmitting more torque directly through the 1/2 In. square drive anvil.
  • HAMMER DRILL/DRIVER DESIGN: Made with a brushless motor to deliver runtime and power for tough applications.
  • PRECISION CLUTCH WITH 20 SETTINGS: On hammer drill/driver provides driving accuracy for reduced fastener damage.
  • LIGHT CORDLESS RECIP SAW DESIGN: Weighs only 6.35 Lbs. (tool only, not including battery), great for overhead work.
Check Stock

RIDGID 18V Cordless 1/2 in. Drill/Driver Kit with (1) 2.0 Ah Battery and Charger

  • Drill/Driver: Powerful motor delivers 525 in./lbs. of torque.
  • Drill/Driver: 15% lighter weight for enhanced user comfort when compared to R8600521 RIDGID 18V Drill/Driver.
  • Drill/Driver: 20% faster drilling to complete the job quicker when compared to R8600521 RIDGID 18V Drill/Driver.
  • Charger: 18V Charger compatible with all RIDGID 18V Batteries.
Check Stock

Twotrees Stepper Motor Driver, TB6600 4A 9-42V Nema 17/23 CNC Controller Single Axes Hybrid - Upgraded Version

  • 【1】Package included: 1 x Stepper Motor Driver,1 x Stepper Motor, 1 x Wire..
  • 【2】Suitable for a wide range of stepper motors from NEMA size 17,23 and 24 (42 * 42mm to 60 * 60mm). It can be used in various types of machines, such as XYZ tables, labellers, laser cutters, engraving machines, pick-place devices and so on..
  • 【3】Motor driver: 9V-42V DC power supply, H-bridges bipolar constant phase current drive. The maximum 4.0A of the eight types of output current..
  • 【4】The largest 32 divisions of the 6 models are optional.
  • Suitable for 4 wires, 6 wires and 8 wires stepper motor..
  • 【5】Protect form: Overheated protection, overcurrent protection, undervoltage protection, prevention of inversion..
Check Stock

BOSCH GXL18V-701B25 18V 7-Tool Combo Kit with 2-In-1 Bit\\/Socket Impact Driver, Hammer Drill\\/Driver, Recip Saw, Circular Saw, Oscillating Tool, Angle Grinder, Worklight & (2) CORE18V 4.0 Ah Batteries

  • CONVENIENT 18V 7-TOOL COMBO KIT: Has 2-In-1 Bit/Socket Impact Driver, Hammer Drill/Driver, Recip Saw, Circular Saw, 6-1/2 In. Circular Saw Blade, Oscillating Tool, Angle Grinder, Worklight, (2) CORE18V 4.0 Ah Batteries, 18V Charger, Belt Clips, Carrying Bags.
  • HALF DRIVER, HALF WRENCH: has a 1/4 In. quick-change hex shank and a 1/2 In. square drive, for using either bits or sockets.
  • POWERFUL IMPACT DRIVER MOTOR: delivers a max of 1,800 In.-Lbs. of torque and up to 4,200 ipm for professional power.
  • IMPACT DRIVER: eliminates using socket adapters, while transmitting more torque directly through the 1/2 In. square drive anvil.
  • HAMMER DRILL/DRIVER DESIGN: made with a brushless motor to deliver runtime and power for tough applications.
  • PRECISION CLUTCH WITH 20+1 SETTINGS: on hammer drill/driver provides driving accuracy for reduced fastener damage.
  • LIGHT CORDLESS RECIP SAW DESIGN: weighs only 6.35 Lbs. (tool only, not including battery), great for overhead work.
Check Stock

BOSCH GXL18V-240B22 18V 2-Tool Combo Kit with 1/2 In. Hammer Drill/Driver, 1/4 In. and 1/2 In. Two-In-One Bit/Socket Impact Driver and (2) 2.0 Ah SlimPack Batteries

  • BRUSHLESS 18V COMBO KIT: Includes two tools (impact driver and hammer drill) for power, with two SlimPack 2.0 Ah batteries.
  • HALF DRIVER, HALF WRENCH: Features a 1/4 In. quick-change hex shank and a 1/2 In. square drive, for either bits or sockets.
  • POWERFUL HAMMER DRILL/DRIVER DESIGN: Made with a brushless motor to deliver runtime and power for tough applications.
  • POWERFUL EC BRUSHLESS MOTOR: Both impact driver and hammer drill have EC Brushless motors for superior efficiency.
  • UPGRADED METAL CHUCK: Featured on hammer drill/driver for greater durability, with greater power transfer.
Check Stock

Milwaukee M18 FUEL 18-Volt Lithium-Ion Brushless Cordless Combo Kit with Two 5.0 Ah Batteries, 1 Charger, 2 Tool Bags (7-Tool)

  • ...RSTATE brushless motor delivers up to 60% more power, is the most compact in its class at 6.9 in. L, and provides up to 2X faster speed under heavy load 2804-20 hammer drill delivers up to 1,200 in./lbs. of torque Compatible with all M18 batteries and tools.
  • 2853-20 impact driver delivers up to 25% more torque with up to 2,000 in./lbs. to complete more demanding applications 2853-20 impact driver: most compact impact driver at 4.59 in. L providing more access in tight spaces M18 FUEL SAWZALL is the fastest cutting reciprocating saw in its class and leverages a POWERSTATE brushless motor to provide users with 3,000 SPM with a 1-1/4 in. stroke length for faster material removal.
  • 2730-20 6-1/2 in. circular saw: POWERSTATE brushless motor provides increased cutting speed and power through the toughest applications M18 FUEL 1/2 in. mid-torque impact wrench with friction ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed, it provides 650 ft. lbs. of nut-busting torque and only weighs 5.1 lbs..
  • 4-1/2 in./5 in. grinder with paddle switch: POWERSTATE brushless motor delivers maximum s....
Check Stock

BOSCH GXL18V-501B25 18V 5-Tool Combo Kit with Two-In-One Bit/Socket Impact Driver, 1/2 In. Hammer Drill/Driver, Reciprocating Saw, Circular Saw, LED Worklight and (2) CORE18V 4.0 Ah Compact Batteries

  • CONVENIENT 18V 5-TOOL COMBO KIT: Has 2-In-1 Bit/Socket Impact Driver, Hammer Drill/Driver, Recip Saw, Circular Saw, 6-1/2 In. Circular Saw Blade, Worklight, (2) CORE18V 4.0 Ah Batteries, 18V Charger, Belt Clips, Carrying Bag.
  • HALF DRIVER, HALF WRENCH: Has a 1/4 In. quick-change hex shank and a 1/2 In. square drive, for using either bits or sockets.
  • POWERFUL IMPACT DRIVER MOTOR: Delivers a max of 1,800 In.-Lbs. of torque and up to 4,200 ipm for professional power.
  • IMPACT DRIVER: Eliminates using socket adapters, while transmitting more torque directly through the 1/2 In. square drive anvil.
  • HAMMER DRILL/DRIVER DESIGN: Made with a brushless motor to deliver runtime and power for tough applications.
Check Stock