JUSHENG GTMEDIA V8 Finder 02 Digital Satellite DVB-S/S2/S2X MPEG-2/4 H.264(8 Bit) TV Signal Finder HD High 3.5\ LCD Satellite Finder MPEG-2 MPEG-4 Freesat FTA LNB Signal Meter Satellite TV Receiver
...r provides all functions needed for installation and verification of digital Satellite TV service to residential homes or multi-dwelling units..
● 3.5 Inch High Definition LCD Screen, ● Fully DVB-S2X/S2/S, MPEG-2/MPEG-4 compliant ● Support H.264 (8 Bit) Hardware decoding ● Digital measuring device for signal strength and quality.Supports presetting all satellite information.
● Support Loop Search ● Constellation analyzer ● Spectrum analyzer ● Supports scan of Auto, Blind, Manual or NIT ● Sound for Locking Signal.
● Auto Calculate Angle of AZ,EL ● Supports DISEQC 1.0/1.1/1.2, Unicable, 0/22kHz Tone ● Speaker Integrated ● Support both AV out and AV in ● Support both HDMI out ● Support real-time power display, with low power reminder ● Supports Youtube for USB wifi 2.4G.
● LNB short protect ● 3.7V/5000mAh Li-ion Battery Included ● Support Type-C charging interface, support multi-protocol fast charging, max 18W ● Support TypeC reverse charging ● Software upgrade via USB port ● Easy to carry.
Specifications TRANSMISSION STANDARDS DVB-S2X/S2/S,MPEG-2,MPEG-4,H.264(8 Bit) Supports softcam: Fastest BISS auto roll, PowerVu auto roll Support CCM,VCM, ACM, multi-stream, T2-MI, Single/Multi-PLP.
XUNTOP EMF Meter Reader EMF Detector Handheld Digital Electromagnetic Field Radiation Detector with LCD Backlight Sound-Light Alarm Max Average Value Lock for Home Office Industrial Site
...ou have a healthy and safe life. Can be used to test TV, induction cooker, refrigerator, cell phone, computer, electrical wires, WIFI signal, wire tower, and any other low-frequency home appliances, etc..
【3 Colors Sound-Light Alarm 】XUNTOP EMF Meter is built-in signal strength prompt speaker, and will trigger sound-light alarm when the radiation data exceeds the safe range (Electric field > 40 V/M and Magnetic field> 0.4µT)-the detector will flash red and alert the user via an alarm sound automatically, also shows "safe" and "harmful" on the LCD display which make the result more easier to understand. Long press the “UNIT” can turn off the sound.
【Easy and Convenient to Use】Data retention to lock Peak Value (Maximum)/Average Value by one key for review. It is a good helper to check out whether the place is radiation-free. Measure both magnetic field radiation and electric field radiation at same time clearly and accurately. One-handed operation, easy to move for on-site measurements, effectively identify the signal source and locate the signal position. Auto power off after 5 minutes without operation.
EMF Meter Electromagnetic Field Radiation Detector-Handheld Digital LCD Backlight EMF Detector for Home Office Outdoor Inspection with Sound-Light Alarm-Silver
...compact and light, it is still high sensitivity. Radiation assessment is equipped with a built-in magnetic radiation sensor to display the radiation value on the digital LCD screen after processing by control micro-chip.
【AUTO SOUND-LIGHT ALARM & ONE TOUCH LOCK RADIATION】- Selavif EMF Meter is built-in signal strength prompt speaker, and will trigger sound-light alarm when the radiation data exceeds the safe range (Electric field 003e 40 V/M and Magnetic field003e 0.4µT)-the detector will flash red and alert the user via an alarm sound automatically.
Long press the “BEEP” can turn off the sound. Data retention to lock Max/Average value by one key.It is a good helper to check out whether the place is radiation-free.
【DUAL READINGS IN LOW OR NO-LIGHT OPERATION】- With large clear LCD screen display, two readings could be easily seen even if in dark or sunshine when to turn on the back light function.
The EMF Reader screen has visual clarity with large digits and LCD display. Backlight can be easy to turned on and off. Great Tester for Home, School, Office, Outdoor and Ghost Hunting. Measure both magnetic field radiation and electric field radiation at same time clearly and accurately.
【LARGER FREQUENCY RANGE】- The measurement frequenc....
HT-1201 Digital Vibration Meter Vibrometer Acceleration Sensor Gauge Analyzer Tester for Vibration Speed Acceleration Displacement
【Widely Used】Digital Vibration Meter Tester adopts piezoelectric type acceleration sensor and is suitable for measurement of conventional vibration of mechanical equipment. It can measure the vibration speed, acceleration, displacement and is widely used in mechanical manufacturing, electric power, chemical engineering, space flight and aviation and other fields..
【Display】This Digital Precision Split Type Vibration Meter Tester has three and a half digit backlight display.LCD displays measurement result and conditions directly.It can measure the environment temperature with 2 temperature units (℃ and ℉).The default state after power on is acceleration measurement unit (m/s2). Press ▼ key to switch to (mm/s) measurement unit or displacement measurement unit (mm) At the time of measurement, press the probe against the measured objects perpendicularly..
【Parameter Reference】Measurement range: acceleration: 0.1-199.9m / s2 (peak value), speed: 0.1-199.9mm / s (effective value), displacement: 0.001-1.999mm (effective value), measurement accuracy: ± (5 % + 2digits), temperature accuracy: ± 2 ℃, frequency range and other parameters have been listed in the description, please confirm the parameters before buying..
Bosch 18-Volt or 120V Compact AM/FM Radio with MP3 Player Connection Bay PB180
COMPACT: Weighing only 4 lbs. and measuring 12 inches long, the Bosch PB180 18V compact radio can be stored anywhere, including the Bosch L-Boxx system.
SOUND: The PB180 radio features two high performance, 5-Watt neodymium speakers for maximum sound clarity and quality over jobsite noise. The PB180 comes complete with an external auxiliary port to connect to digital media players.
DURABILITY: The jobsite radio has high strength shock-absorbing housing and handles that provide maximum robustness and protection. Even at a 2 meter drop, the PB180 can be fully functional.
QUALITY: Featuring advanced digital signal processing to optimize AM/FM reception quality with 10 preset options for all your favorite stations. The PB180 also includes a 7” antenna that pivots and rotates 360 degrees for maximum reception both indoors and outdoors.
COMPATIBILITY The PB180 is powered by the Bosch AC adapter (included) or Bosch 18V Lithium-Ion batteries and chargers (not included, sold separately).
MATRIX MCR-5030 Benchtop LCR Meter Precision Digital Lab Tester for apacitance Ground Insulation Resistance Inductance Accuracy 0.1% Test Measure Inspect Multimeter （100Hz-30kHz）
【MATRIX LCR METER BENCHTOP】Precision digital lcr meter for labo voltage capacitor ground insulation resistance. It adopts 4.3-inch TFT LCD screen, 5-digit test resolution impedance meter instrument, multi-frequency points and 0.1% accuracy to meet the testing needs of various components and parameters..
【TEST PARAMETER and TWO DIFFERENT SIGNAL SOURCES】L,C, R, lZl, D, Q , X , ESR,θ(Deg),θ(Rad).30Ω,100Ω two different signal source output impedance..
【PRODUCT FEATURE】 Built-in comparator, 5-level sorting flexible pass and bad alarm mode. Shutdown automatically saves test conditions, user-friendly operation. Instrument software version, which can be upgraded through U disk. U disk screen copy, test data saving, support format FAT16, FAT32 file system. There are more than 100 sets of setting files inside, and U disk expansion can save or call multiple sets of test files..
【THREE-YEAR WARRANTY AND QUALITY CHECK】Buy Precision Digital LCR, you will get 1* Benchtop LCR Meter, 1* Power Cord, 1* Four-terminal Test Cord, 1* CD, 1* Test Report, 1* User Manual, 1 * Fuse table. We will inspect all power supplies and accessories before shipping to ensure that every customer receives a quality product with a three-year warranty policy..
CAMWAY Digital Clamp Meter TRMS Amp Clamp Meter 6000counts Multimeter with LOWZ, LPF Function, AC Current AC DC Voltage NCV Continuity Capacitance Resistance Frequency Diode Hz Temperature Tester
【Multifunctional Clamp Meter】 Accurate AC/DC voltage, AC/DC current, Frequency, Duty Cycle, Resistance, Temperature, Diode, Continuity, NCV , etc. Wide Range of Applications, CAMWAY TRMS Amp Clamp Meter Ideal For Home & Professional Use, Automotive, Industrial Electrical Troubleshooting..
【LoZ& LPF Function】Low Impedance (LoZ) Mode Identify and Eliminate Stray Voltages, Besides, the Digital Clamp Meter also with Low Pass Filter ( LPF) Function for Remove Unnecessary High Frequency Components From The Input Signal to Remove High Frequency Interference..
【Ultra-clear LCD display】Made of High-quality Materials, Durable Practical, Wear-resistant Stable in Performance, Specially, When the 6000counts Multimeter Clamp Meter Measuring High Voltage (>80V), The LCD display Will Turn Orange..
【Hold & Backlight Button】 The Data Hold and Backlight Button are On The Side of the TRMS Amp Clamp Meter. A Short Press Will Hold The Data For You, A Long Press Will Turn The Backlight On. Convenient for One-handed Operation..
【Convenient Clamp】Digital Clamp Meter Avoid Hazardous Situations by Using the Convenient Clamp To Safely Measure AC Currents Without Having To Strip Cord or Break Circuit..
AstroAI TRMS 6000 Counts Multimeter with Large Backlit Display + 4000 Counts Auto-ranging Digital Clamp Meter
Multifunctional - Accurately measures AC/DC Current, AC/DC Voltage, Continuity, Resistance, Capacitance, Frequency and Diode.
Easy to read - The LCD Backlit Screen make it easy to use in a dark working area. It is often easier to use the data hold function to freeze the data being displayed on the digital display..
Suitable For Many Occasions - This Multimeter is a golden partner to help to troubleshoot a variety of automotive and household electrical problems safely and accurately..
Non-contact Voltage Testing - This Clamp Meter features non-contact voltage testing with sound and light alarms. When the Meter senses a weak AC signal, the green indicator light will come on and the buzzer will emit a slow, audible beep. when the Meter senses a strong AC signal, the red indicator light will come on and the buzzer will emit a brief beep.
Ensure Safety - Double ceramic fuse is anti-burn and protects from overloading，and it will be more secure and reliable.
MATRIX MCR-5200 Benchtop LCR Meter Precision Digital Lab Tester for Apacitance Ground Insulation Resistance Inductance Accuracy 0.1% Test Measure Inspect Multimeter （40Hz-200kHz）
【MATRIX LCR METER BENCHTOP】Precision digital lcr meter for labo voltage capacitor ground insulation resistance. It adopts 4.3-inch TFT LCD screen, 5-digit test resolution impedance meter instrument, multi-frequency points and 0.1% accuracy to meet the testing needs of various components and parameters..
【TEST PARAMETER and TWO DIFFERENT SIGNAL SOURCES】L,C, R, lZl, D, Q , X , ESR,θ(Deg),θ(Rad).30Ω,100Ω two different signal source output impedance..
【PRODUCT FEATURE】 Built-in comparator 5-level sorting flexible pass and bad alarm mode. Shutdown automatically saves test conditions, user-friendly operation. Instrument software version, which can be upgraded through U disk. U disk screen copy, test data saving, support format FAT16, FAT32 file system. There are more than 100 sets of setting files inside, and U disk expansion can save or call multiple sets of test files..
【THREE-YEAR WARRANTY AND QUALITY CHECK】Buy Precision Digital LCR, you will get 1* Benchtop LCR Meter, 1* Power Cord, 1* Four-terminal Test Cord, 1* CD, 1* Test Report, 1* User Manual, 1 * Fuse table. We will inspect all power supplies and accessories before shipping to ensure that every customer receives a quality product with a three-year warranty policy..
AstroAI Digital Clamp Meter Multimeter 2000 Counts Amp Voltage Tester Auto-ranging with AC/DC Voltage, AC Current, Resistance, Capacitance, Continuity, Live Wire Test, Non-contact Voltage Detection
Versatile Digital Clamp Meter: Accurately measures AC Current (DO NOT MEASURE DC CURRENT)! AC/DC Voltage, Capacitance, Resistance, Diode Continuity and Live Wire Tests. This clamp meter is a really useful tool for solving industrial and household electrical issues.
Large Jaw Opening: The jaw opening measures AC current in a conductor without touching or interrupting the circuit. Its slim and compact size makes it easy to operate in narrow spaces.
Thoughtful Design: Support Data Hold, Max/Min, Auto Shut-off, low battery indicator and continuity buzzer. Includes Convenient features like Audial and Visual Alarm, LCD Backlit Screen and Flashlight make it easy to use. Two 1.5V AAA batteries are included in the package.
Non-contact Voltage Testing: This Clamp Meter features non-contact voltage testing with sound and light alarm. When the Meter senses a weak AC signal, the green indicator light will come on and the buzzer will emit a slow, audible beep. when the Meter senses a strong AC signal, the red indicator light will come on and the buzzer will emit a quick beep.
Additional Tips: The clamp meter has passed the environmental pollution degree 2 and overvoltage category III 600V safety standards. Combined with Amazon's excellent delivery, we provide lifetime....
