Hand-held dual channel oscilloscope, and recorder.
Connect-and-View & IntellaSet Auto reading Technology for simplicity and hands-off operation.IntellaSet technology automatically and intelligently adjusts numerical readout based on the measured signal.
Oscilloscope Multimeter 2-in-1, Color Screen Intelligent Graphical Handheld Oscilloscope Multimeter 1MHz Bandwidth, 2.5Msps Sampling Rate, DC/AC Voltage/Current Test
... convenient for detecting and debugging..
Meter mode: 4 1/2 digits of the true effective value. 1. Standard voltage, current, resistance, diode, continuity, capacitance test. 2. Auto range function, convenient for testing and debugging. 3. The maximum input voltage is AC 750V, DC 1000V. 4. Independent multimeter and oscilloscope input. 5. Reading the wait function. 6. Relative measurement function..
USB Type-C interface supports not only power bank power supply, but also adapter charging and top computer connection. After connecting to the computer, the computer can recognize the oscilloscope as a USB flash drive and read saved images or CSV waveforms, which is useful for later viewing and analyzing waveforms or for sharing waveform data..
Save function: can save 4 groups of settings, 4 groups of reference waveforms, 4 images, 4 groups of waveforms in CSV format. The reference waveform can be displayed on the same screen as the measured waveform for convenient comparison of the waveform. Self-calibration function. Up to 6 automatic measurements can be displayed simultaneously on the screen..
UNI-T UTG962 + UTD2152CEX, Function Generator and Oscilloscope Kit
MSO3000E not only has 4 analog channels, but also provides 16 digital channels to accurately capture and display digital level signals and bus logic status.
Built-in dual-channel 50MHz arbitrary waveform generator function, integrating oscilloscope, logic analyzer and signal source into one, bringing you a more efficient test experience..
Rich trigger function to meet more test conditions, and the time base of each channel is independently adjustable, which is convenient for users to observe four signals with large frequency differences at the same time..
It has a fast numeric keyboard to input the required data quickly and effectively, and it has an independent 4-window display to bring a more efficient user experience..
70Mpts storage depth per channel, while observing four channels of signals at the same time, it can maintain the highest sampling rate for a longer period of time, without losing any waveform changes, and can also analyze waveform details.
DSO 138 DIY Oscilloscope Kit Opening Source 2.4″ TFT 1MSPS Digital Oscilloscope Kit with DIY Parts & Probe, Handheld Pocket Sized 13803K, SMD Soldered Electronic Learning Set
Digital DIY oscilloscope uses ARM Cortex-M3 processor and contains a 2.4-inch color TFT display, which can be used as an ARM development test board..
Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting..
Can make a tailor-made software development on the basis of this kit, which can be can be changed to millivoltmeter, data recorder, etc..
The variety of components is suitable for students to understand the oscilloscope structure and principles, and do in-line component welding, and chip component welding training..
The oscilloscope kit is a kit specially designed for professional teaching and training in electronics. Please note that this kit need to be assembled and soldered by yourself..
✅【2021 UPGRADED OSCILLOSCOPE】: Seesii handheld digital oscilloscope with 2.4inch TFT high definition screen, made of high quality materiels, lightweight and portable,durable enough for long term use, with the protective silicone covers on both sides of the instrument, which can protective the product and prolong the service time of it.Suitable for home appliance inspection, automotive diagnostics, research and education, product development, utility testing and many other applications..
✅【HIGH QUALITY & MULTIFUNCTIONAL】:This is a fully functional, practical and cost-effective professional portable oscilloscope. The waveform bandwidth up to 120MHz with an equivalent sampling rate of 500MSps. Support 1kHz、10kHz、100kHz、1MHzfour-position square wave signal output.Store up to 2500 waveforms, support thumbnail view, waveform delete and other functions..
✅【3 TRIGGER MODES & WAVEFORM PARAMETER SETTABLE】:The DIY oscilloscope kit configured 3 trigger modes, auto/normal/single trigger.Support waveform parameter setting,such as time base, amplitude, trigger slope, etc. And Support waveform one-key AUTO to automatically adapt to the screen, no need to adjust parameters,convenient and accurate measurement, can meet your different measurement ....
Update From kuman 13803KThe sensitivity of DSO Shell oscilloscope has been extended in both directions and is higher and wider than DSO138 oscilloscope. It reaches 5mV/div --- 20V/div while DSO138 is only 10mV/div --- 5V/div.
More Applications Display and MCU are now mounted on the same board (mainboard) to avoid using inter-board pin-headers, Analog channel is placed on a separated board which contains most user install parts. This brings in better separation between analog and digital circuits. Without the analog portion the mainboard can be used in many other applications..
Rotary encoder has been added It makes parameter adjustment much quicker and easier..
DSO Shell comes with full enclosure The front panel and top/bottom brackets are flexible for easy user modification..
Detailed InstructionDetailed assembly instructions are provided in combination with troubleshooting guide and schematic..
Digital Oscilloscope with 2 Channels 120Mhz Bandwidth Signal Generator 500MSa/s Sampling Rate, 2.8" LCD Backlight Display, Waveforms Storage, 3 Scan Modes, XY/YT/Roll, FFT Spectrum, Single Trigger
☑Updated 2 Channels & High Bandwidth：2CH oscilloscope, 120MHz bandwidth, minimum measurement range 10mV /div, 500MSa/s sample rate,advanced digital trigger system.Up to 120M bandwidth can easily cope with mearsurement testes in various fields. Such as mcu debugging, car repair, home appliance repair, personal DIY, electronic competition, power supply debugging, inverter, etc. It can also be used as a portable tool for on-site debugging..
☑FFT Spectrum & Cursor Measurement: The professional portable oscilloscope with FFT display function, can analyze the spectral characteristics of the signal. Cursor measurement function, convenient manual measurement period, frequency and voltage..
☑3 Trigger Modes & One-key AUTO: The DIY oscilloscope kit configured 3 trigger modes, auto/normal/single trigger. Support waveform parameter setting,such as time base, amplitude, trigger slope, etc. And Support waveform one-key AUTO to automatically adapt to the screen, no need to adjust parameters,convenient and accurate measurement..
☑Signal Generator: The bottom of the oscilloscope can output a variety of waveforms of 2.5....
MSO3000E not only has 4 analog channels, but also provides 16 digital channels to accurately capture and display digital level signals and bus logic status.
Built-in dual-channel 50MHz arbitrary waveform generator function, integrating oscilloscope, logic analyzer and signal source into one, bringing you a more efficient test experience..
Rich trigger function to meet more test conditions, and the time base of each channel is independently adjustable, which is convenient for users to observe four signals with large frequency differences at the same time..
It has a fast numeric keyboard to input the required data quickly and effectively, and it has an independent 4-window display to bring a more efficient user experience..
70Mpts storage depth per channel, while observing four channels of signals at the same time, it can maintain the highest sampling rate for a longer period of time, without losing any waveform changes, and can also analyze waveform details.
