Best Dimensional Standard Of Bolts

KIMISS Steering Wheel Button, Carbon Fiber Steering Wheel Horn Push Button Kit for 6 Bolts for Sparco Steering Wheel Auto Car Modified Parts

  • Applicable steering wheel--------Car Steering Wheel Dual Side Buttons Applicable 6 bolts for steering wheel, suitable for all 6 steering wheel bolts, with medium horn button, 2 spade connectors at the rear.
  • Excellent material -------- Horn Push Button uses high-quality carbon fiber material, enhances the texture of the steering wheel, strong and durable, maximizes durability, quality assurance.
  • Easy to install----Steering Wheel Button is easy to install, does not require complicated tools, easy to use, install all 6 bolts of the steering wheel at the position with the center horn button, and 2 shovel-shaped connections at the rear Device..
  • Stable performance--------New and high-quality Steering Wheel Cruise Control Switch Button, with stable characteristics and high reliability. Very suitable for your car, professional features and high reliability will bring you an excellent experience..
  • Standard specifications -----Steering Wheel Switch Multimedia System meets the standard specifications and strictly follows the factory quality control. Use this factory attachment to replace the missing or damaged horn button on the steering wheel..
Check Stock

Floyutin 10 PCS Stainless M8 Wing Nuts Metric Thread Butterfly Clips Fasteners Kit

  • Measurement (Appr.): M8x1.25 304 Stainless Metric standard wingnuts. M8 stands for Metric thread inner diameter(8mm/0.31"), thread pitch 1.25mm.Thread Max outer diameter 0.61"/15.6mm,thick 0.35"/9mm.the wing thick 0.2"/5mm, wing length 0.75"/19mm : Fit on to M8x1.25 screws/bolts. Fully threaded, Right hand direction. More detail size please refer to the photoes..
  • Thumb nuts with 2 butterfly wing on each side. Hand twist without tools, Fit for finger tightening or lossening. Allows you to adjust the tightness of the legs easily. Wings are thick(0.34") and don't see an issue with any bend distortion..
  • Easy to install: Serve as a nut, Use metric screws or apprapriate sized bolts to mount ss wing nuts. Just spin on on easily, tighten nicely, and stay in place. Please choice the right metric thread size match bolts or screws and driver..
  • Multi-purpose Application: SS heavy duty threaded can be mounted with bolts. Used it for quick disconnect on bolted connection.Just for hanging bird houses,furniture decoration,hardware lighting, marine battery posts. Better replace the old nuts for getting adjusted or temporarily removed pretty often..
  • 10 pcs wingnuts included. No Bolts/Dirver included. Made of 304 stainless steel, good solid .corrosion resistant,sturdy and ....
Check Stock

Genius Tools 4PC SAE Extra Long Box End Wrench Set - DE-704S

  • Experience ease and freedom tackling recessed bolts and bolts in tight spots with these box end wrenches featuring super thin box end walls, extra long length, and 0 degree offset.
  • Super thin box end with thin walls and deep profile provides easy access to recessed bolts and bolts in tight spots. 0 degree offset allows for a secure fit onto fasteners, giving you higher torque and easier swing. Extra long handles that are up to 2x longer than standard wrenches give you the leverage you need.
  • Premium Chrome Molybdenum steel construction provides exceptional strength and durability. 12-point WaveDrive box end transfers torque uniformly and prevents damaging and rounding of the bolt.
  • Flawless chrome plating, achieved by thorough polishing and careful application of chrome protective plating, ensures durability and corrosion resistance. Large stamped sizing won't fade over time.
  • Set completes with a heavy duty canvas pouch. 6-piece set with 12 sizes: 8 x 9 mm, 10 x 11 mm, 12 x 13 mm, 14 x 15 mm, 16 x 18 mm, 17 x 19 mm..
Check Stock

5 Pieces Easy Out Bolt Extractor Set, Straight Fluted Screw Extractor, Broken Damaged Bolt Removal Tool Square Type

  • Screw Extractor Set: The damaged bolt removal kit of our screw removal tool is made of high hardness materials, and the standard size can help to easily remove the damaged screws, studs and bolts..
  • 5 Sizes: We provide you with a 5-clock screw extractor, which is sufficient to meet your various use occasions. It is specially used to remove damaged studs, bolts, socket head cap screws and accessories, which makes you more worry free..
  • Top Class Materials: The screw removal kit is made of high hardness carbon steel for additional durability, wear resistance and durability..
  • Easy to Install: Use a screw remover with proper size to drill a hole with cutting size, and use a disassembly tool to easily take out screws or bolts, and you are done..
  • Widely Usage: We provide a square simple removal tool set, which can be widely used to remove damaged screws, studs and bolts, and also widely used in cars and families..
Check Stock

1/4-20, 5/16-18, 3/8-16 Threaded Inserts, Wood Inserts, Steel Threaded Inserts for Wood Furniture Screw, HELIFOUNER 143 Pieces 1/4'-20, 5/16'-18, 3/8'-16 Threaded Inserts Kit with Hex Wrench

  • 【Detailed Dimensions】1/4″-20 x 10mm/15mm/20mm/25mm, 5/16″-18 x 13mm/15mm/20mm/25mm, 3/8″-16 x 20mm/25mm, 10 sizes commonly used threaded inserts in a plastic case, different sizes can satisfy your different needs, coarse thread, fit standard 1/4 20 screws bolts and 5/16 18 screws bolts perfectly..
  • 【Color Zinc Plated Steel】Made of high quality carbon steel, color zinc plated on the surface which have good corrosion resistance in bad environment like high temperature, high hardness and perfect wear resistance, standard internal hex socket, without burr, smooth, non-slip, which can ensure long time using..
  • 【Easy To Install】You can drill a hole by using a 9.5mm /12mm /15mm drill bit, ensure a precise 90 degree angle for inserting the threaded inserts, then you need to screw the inserts into the 9.5mm /12mm /15mm holes by using our hex wrench. Make sure you countersink the hole to head size before you insert the threaded sleeve, fit standard 1/4 20, 5/16 18, 3/8 16 screws bolts perfectly..
  • 【Threaded Inserts Assortment Kit】Total 143 pieces 10 sizes threaded inserts are packed in a durable transparent box with label for you. It is easy to distinguish the size of the product, you can choose the suitable one to use in your wood furniture. O....
Check Stock

Lot 4 Each, 48

  • Lot of 4 each 3/4 wide x 3/8 high x 48 long.
  • Thick .100 sidewalls minimize bowing and twisting.
  • Uses standard 1/4" hex heads, 1/4" T bolts or 5/16" T bolts.
  • Counter sunk holes drilled 3" from each end and then every 6 for #6 screws. Screws not included..
Check Stock

Jwodo 2Packs Toilet Tank to Bowl Bolt Kits, Solid Brass Toilet Bolts with Cone Rubber Sealing Gasket and Brass Lock Nuts for Easy Installation, Universal Fits for Most Toilets

  • [DURABLE CONSTRUCTION] - The Jwodo Toilet Tank to Bowl Bolt are made by solid brass and washers are made of high-quality rubber for preventing leakage, no rusting and longtime usage..
  • [USEFUL TOILET HARDWARE] - Jwodo Toilet Tank Bolts are much better than the plastic ones. Replace old bolts and secure your toilet tank with new brass bolts and hardware. There will be no more leaking from your toilet tank..
  • [WIDE COMPATIBILITY] - Jwodo toilet Bolts universally fit for most toilet tank. Jwodo replacement toilet bolts and nuts are compatible with TOTO, Kohler, American Standard Toilets and Others..
  • [EASY TO INSTALL] - The Jwodo Toilet tank to bowl bolt and Screws Kit includes 2pcs brass, bolts, 2pcs cone rubber seal washers and 2pcs flat seal washers and 2pcs brass locking nuts. Completed with the extra-long lock nuts, it is very easy to install with a household tools and takes only a few minutes..
  • [SATISFACTION GUARANTEE] - We stand by our quality commitment and will guarantee you 100% satisfaction of our Toilet Tank to Bowl Bolt Kits. Please do not hesitate to contact us if there is any question. We will do our best to solve the problem as soon as possible..
Check Stock

6 Packs Toilet Bolt Sets Universal Toilet Bolts Screws Heavy Duty Toilet Seat Hinge Bolts with Plastic Nuts and Washers Replacement Parts for Mount Toilet Seat Hinges

  • Package content: you will get 6 pieces of toilet seat bolts, 6 pieces of plastic nuts and 6 pieces of washer replacement, practical sets for your DIY project installation.
  • Durable material: the universal toilet seat hinge bolts are made of steel, with galvanized surface, they are durable and not easy to corrode or rust, the replacement washers are made of steel and nuts are made of plastic.
  • Size information: the heavy duty toilet bolt screws are about 2.75 inches in length and the thread diameter is approx. 0.3 inches.
  • Warm notice: the replacement parts are small, please keep them away from little kids to avoid swallowing risk.
  • Easy to install: the toilet seat hinge bolts screws are convenient to use and you can easily replace the old ones, you can rotate the nuts to the proper position by hand and tighten the bolts with a screwdriver, which just takes little time.
  • Practical for you: the toilet bolts with buts and washers can be applied most standard toilet seats, suitable for your toilet seat repair or replacement work, they are stable and will not wobble, suitable for your long-term use.
Check Stock

DCT Tee Bolt Set – 20 Pack 1in T Bolts for Woodworking T Track Bolts Jig Bolts 1/4in 20 Thread T Bolt

  • These furniture bolts and barrel nuts are ideal when building furniture, assembling sheds, decks, and cabinetry, or installing speakers or caster wheels.
  • BUILT TO LAST: Constructed of grade 2 steel for strength, durability, and longevity.
  • Zinc-plated for resistance to rust and corrosion.
  • Unlike standard bolts and screws, these threaded wood inserts T bolts will not strip easily or over tighten.
  • PERFECT SIZE FOR YOUR NEEDS: These T slot bolt wood fasteners have a length of 1 inch (2.5 cm) and a thread per inch of 20.
  • The diameter of the bolt stem is 1/4 inch (.6 cm).
  • EASY TO USE: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
  • Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place (track, knobs, and tee nuts not included).
Check Stock

Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences

  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction.
  • Pre-load tension design maintains consistent pressure across face of the feather board.
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots.
  • Dual Slide Motion-side to side and forward action for quick and easy setup.
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences.
  • Split rail miter bar construction-provides maximum hold.
  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening.
  • All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences.
  • Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back.
Check Stock