Best Din Rail Mounting

AC Current Transducer Transmitter, SZT15-CH-10V Current Mutual Inductor AC 0-50A to DC 0-10V SZT15-CH-10V

  • Hall effect measurement for direct currents.
  • Response time of 250 ms (10-90% step change).
  • RoHS compliant for environmental protection.
Check Stock

UOHGDPY DIN Rail Terminal Blocks,Universal Compact Wire Wiring Connector (40 pcs connectors+4 pcs Article in Parallel+4 pcs Digital Identification+2 pcs Fixed clamp+40 pcs Screw)

  • 【Easy to Use】The patented design, different from the ordinary rail connector, does not require the tedious tightening of screws, just insert the rail terminal into the 35mm iron and aluminum DIN rail, lift the orange clip, insert the wire into the hole until you feel the resistance, then lower the orange lever and complete the operation, saving 70% of the operation time..
  • 【Perfect DIN Rail Terminal Blocks Kit】Terminal blocks kit comes with 40pcs 12AWG terminal blocks, 4pcs connection bar, 4pcs digital identification, 2Pcs Fixed clamp,40pcs screws, 2pcs end stopper bracket and a transparent storage box..
  • 【Universal Compatibility】 This Wire Connector is suitable for solid and flexible wire. Connect any combination of solid, stranded, and flexible copper wires. Suit for solid wire 0.08-4.0mm² /28-12 AWG, flexible wire 0.5-2.5mm² /20-14 AWG. It is widely used in distribution boxes, control cabinets, switchgear, complete sets of equipment, machinery etc..
  • 【Premium Quality】Terminal blocks, high quality brass metal body and the best flame retardant insulating material modified nylon PA66 shell, it has a long life, no corrosion, anti-aging, 4KV and shock resistance, strong structure firmly locked to DIN rail..
Check Stock

LOLOVI BBR LAN Ethernet 2 Way Relay Board Delay Switch TCP/UDP Controller Module Web Server Great Value

  • Secure mounting for SNAP I/O modules plus a SNAP brain or on-the-rack SNAP PAC controller.
  • Compatible with all SNAP PAC brains and R-series controllers, including Wired+Wireless models.
  • Handles analog, digital, and serial modules on the same rack.
Check Stock

Loulensy AC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-300V AC Output 0-5V DC

  • Working Stability: annual change 003c 0.2%.
  • Impulse Voltage:5KV(peak value),1.2/50uS.
  • Load Capacity: 2 times current continuous.
  • Storage Environment:-40 to +115 degress Centigrade,20%-95% without condensation.
  • Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
  • Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
  • Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
  • Working Environment:-25 to 80 degrees Centigrade,20%-90% without condensation.
  • Isolation Resistance:20M Ohm(DC500V) or above.
  • Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
Check Stock

Loulensy AC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-400V AC Output 0-5V DC

  • Working Stability: annual change 003c 0.2%.
  • Impulse Voltage:5KV(peak value),1.2/50uS.
  • Load Capacity: 2 times current continuous.
  • Storage Environment:-40 to +70 degress Centigrade,20%-95% without condensation.
  • Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
  • Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
  • Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
  • Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation.
  • Isolation Resistance:20M Ohm(DC500V) or above.
  • Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
Check Stock

Electronics-Salon 20 Watt(VA) DIN Rail Mount Power Transformer Module (in: 115VAC, Out: 24VAC)

  • Secondary output: Full load 24VAC /0.84A, No load 27.6VAC..
  • Epoxy resin encapsulated safety isolating transformer. Epoxy resin cast in vacuum. Fire resistance property in accordance with UL94-V0. Dielectric strength: 3500V/1min 5mA. no-load loss less than 1.2 watt. Insulation grade: grade B. Temperature rise: less than 28C..
  • Screw terminal block easy to connect wires. With primary input fuse, fuse holder easy to replace the fuse. Output power indicator LED..
  • DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail..
Check Stock

CR Magnetics CR5320-50 DC Voltage Transducer with Single Element, DC, 0 - 300 Load, 24 VDC +/-10%, 0-50 VDC Input Range, 4 - 20 mADC Output Range

  • Response time of 250 ms (10-90% step change).
  • UL Recognized and CE certified for quality assurance.
Check Stock

Blue Sea Systems 7198 285-Series Circuit Breaker Panel Mount Adapter

  • This is a great circuit breaker used to protect an electrical circuit from damage caused by excess current resulting from an overload or short circuit.
  • Fast Closing to ensure reliable operation of the load and prolong the life of electrical circuit breakers.
  • It is easy and reliable to use, which supports short circuit protection, overload protection.
  • It can be mounted conveniently on DIN rail, DIN rail is not included.
  • Widely used for solar panels grid system, wind and solar hybrid system and many other DC systems.
Check Stock

AMX‑FX3U‑26MR‑E PLC Control Programmable Logic Controller, PLC Programmable Controller with DC24V Analog Ethernet Port

  • Number of Inputs 14, Communication Ports - Ethernet, Profinet, UDP.
  • Digital, transistor output type, Number of Communication Ports -1.
  • Analogue, digital input type, Programming Language Used FBD, LAD, SCL.
  • Voltage rating 24 V dc, DIN Rail, Wall Mounting.
  • Number of Outputs 10 (Digital Output, Transistor Output).
Check Stock

Electronics-Salon 5 Watt(VA) DIN Rail Mount Power Transformer Module (in: 115VAC, Out: 24VAC)

  • Secondary output: Full load 24VAC / 208mA, No load 28.8VAC..
  • DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail..
  • Epoxy resin encapsulated safety isolating transformer. Epoxy resin cast in vacuum. Fire resistance property in accordance with UL94-V0. Dielectric strength: 3500V/1min. No-load current less than 20mA, no-load loss less than 0.5 watt. Insulation grade: grade B. Temperature rise: less than 22C..
  • Screw terminal block easy to connect wires. With primary input fuse, fuse holder easy to replace the fuse. Output power indicator LED..
Check Stock